PROLINE Promax 180 Portable Line Boring And Welder Machine Instruction Manual
- June 13, 2024
- PROLine
Table of Contents
PROLINE Promax 180 Portable Line Boring And Welder Machine Instruction
Manual
Assembly Instruction
Promax 180 portable line boring and welder machine
- Servo motors
- Centering cone big
- Axial feed motor
- Centering cone small
- Rotational Gearbox Unit
- Line boring bar
- Positioning auxiliary
- Axial feed bearing frame plate
- Bearing supports
- Manual axial feed handwhee
Boring bar as standard: 1600mm
- (Standard) Boring Bar Diameter: <D 50mm * 1600mm
Bearing bracket
- Standard) Bearing frame : <D 55-270mm
Motor module
Servo motors
- Rated power: 3100w
- Hertz range : 50-60Hz
- Output torque : 130Nm
- Optional voltage : 220V /380V
- Axial feed motor power : 400w
Centering cone
Centering cone
- big Centering cone <ll100-164mm
- small Centering cone <ll55-105mm
Line boring
Line boring
-
50mm line boring : 55-160mm
-
Output speed: 50-255rpm
-
Speed mode: stepless speed
-
Axial feed mode: automatic/manual
-
Fixing method: welding
-
Axial feed speed: 0.01-0.5
-
cutting thickness: 0.02-Smm
-
tool holder: 14mm diameter
-
Ra:3.2
welding
welding
-
Welding aperture range: 45-160mm (optional)
-
Welding thickness : 3-4mm
-
Welding wire length: 4540mm
-
Welding bar length: 200mm/240mm/350mm/800mm
-
welding bar assembly total length: 1400mm
-
Applicable welding machine: 210-500 model welding machine
-
Applicable welding wire diameter: 0.8/1.0/1.2
-
Applicable welding method: CO2 gas shield welding
-
Welding function: spiral welding, bore welding, sector welding, jump welding
Face tool holder
Boring bar as standard: 1200mm
- Optional 35mm system : line boring <D40-75mm
Wire boring tool holder
Optional 300mm system
- Processing range: 120mm-300mm
- The modular type line boring tool holders can be freely assembly
- The hole welding can reach up to 300mm
Wire boring tool holder
- 300mm Modular type line boring tool holder set
Face tool holder
Flange Facing
- The inner diameter is 50mm
- The feed speed follows the spindle
- Flange face processing diameter: 120mm-300mm
- Flange Facing
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>