timberk T-WM5UM10Q30 Washing Machine Instruction Manual

timberk T-WM5UM10Q30 Washing Machine

Product Information

• Model: T-WM5UM10Q30
• Brand: Timber
• Power: 220-240V~
• Frequency: 50Hz
• Waterproof Rating: IPX4
• Dimensions: 595x440x850mm
• Weight: 52kg

Product Usage Instructions

1. Before using the washing machine, ensure that it is properly installed and connected to a power source.
2. Load your laundry into the machine, making sure not to overload it.
3. Add detergent and any desired additives according to the manufacturer’s instructions.
4. Select the desired washing program using the control panel.
5. Adjust any additional settings such as temperature and spin speed.
6. Press the start button to begin the wash cycle.
7. Once the cycle is complete, remove your laundry from the machine.
8. Clean the machine’s drum and filters regularly to maintain optimal performance.
9. Store the washing machine in a dry and safe place when not in use.

For further details and safety precautions, please refer to the complete user manual.

Dear customer!
We thank you for your wise choice and for the purchase of the Timberk washing machine. It will serve you for a long time.

IMPORTANT INFORMATION

• Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt, and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which does not fundamentally affect its safety, performance, and functionality.
• There may be some misprints in text and digital notations in the present manual.

IMPORTANT!

• Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device.
• The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE

• There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

• When using the washing machine, a number of precautions must be observed. Improper operation due to ignoring precautions can lead to harm to the health of the user and other people, as well as damage to their property.

1. The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities or lack of life experience or knowledge, unless they are supervised or instructed to use the device by a person responsible for their safety.
2. Children must be supervised to prevent playing with the device.
3. Children from the age of eight, persons with reduced physical, sensory or mental abilities and persons without relevant experience and knowledge may use this device only under supervision or after instruction on the safe use of the device and the risks associated with it. Do not allow children to play with the appliance. Do not entrust the cleaning and maintenance of the device to children without appropriate supervision.
4. Do not leave children under the age of three years without constant supervision near the appliance.
5. If the power cord is damaged, its replacement, in order to avoid danger, must be carried out by the manufacturer, service department or similar qualified personnel.
6. It is necessary to use new hoses, when connecting the device to the water supply, reuse of old hoses is not allowed.
7. Do not attempt to repair the appliance yourself or replace any parts. If problems are detected, contact the nearest Service Center.
8. This device is intended for domestic and similar applications, for example:

• in residential apartments
• in rural residential buildings
• in the areas of shops and offices
• in hotels, inns and other residential premises

WARNING: In order to avoid danger due to unintentional reset of the thermal switch, this device must not be connected to an external switch, such as a timer, or to a circuit that is regularly switched on and off by the electricity supplier.
Risk of electric shock

1. Use the device at a voltage of 220-240 V~. If the rated current is higher than 10 A, an outlet designed for a grounded wire should be used.
2. When disconnecting the appliance from the mains, do not pull the power cord, grab the plug. Do not twist it and do not wind it on anything.
3. If the power cable is dirty, wipe it with a dry cloth in a timely manner.
4. Do not insert or remove the power plug with wet hands.
5. Remove the power plug from the power supply after finishing washing, repairing or cleaning.

Danger of high temperatures

1. When washing in high temperature mode, the glass of the door will heat up. Do not touch the glass of the door, keep a close eye on the children.
2. When opening the door after washing in high temperature mode, wait until the temperature drops to a safe level and the door opens automatically.

Risk of damage to the device

1. Do not put heavy things on the top of the washing machine.
2. If you want to move the washing machine, ask someone for help.
3. Seek help only from washing machine repair specialists.

Danger of explosion

1. Do not wash fabrics contaminated with kerosene, gasoline, solvent, flammable substances.
2. Do not use the washing machine if there is a gas leak in the room where it is installed.

• Please note: When you pull out the plug, the door lock can be unlocked even if there is a lot of water inside the drum. Therefore, please check the water level inside the machine before unlocking the door to avoid unwanted damage.

Risk of fire and current leakage

1. Make sure that there is no source of fire or lit cigarettes, candles and flammable substances near the washing machine.
2. Do not spray water on the control panel of the washing machine.
3. Do not use the washing machine outdoors or in high humidity conditions.
4. Fix the drain hose and make sure that the sewer is clean.

Risk of injury

1. Remove the cardboard packaging after unpacking. Do not let children play with it or eat it.
2. Do not allow children to turn on the washing machine or climb on it
3. Please close the drum door after use, so that children do not end up inside the drum.

Danger of damage to things

1. Do not load waterproof items into the washing machine, for example, raincoat, feather products, sleeping bags.
2. Load things suitable for washing into the machine. In case of doubt, refer to the label of your clothing
3. Read these instructions carefully before using the device to avoid damage during use.
4. Before the initial switch-on, check whether the technical specifications indicated on the product correspond to the parameters of the electrical network.
5. Use only for domestic purposes according to this Operating Manual. The device is not intended for industrial use
6. Make sure that the power cord does not touch sharp edges and hot surfaces.
7. If the product has been at a temperature below 0 ° C for some time, it should be kept in room conditions for at least 2 hours before switching on.
8. Always disconnect the device from the power supply before assembling, disassembling and cleaning, or if you are not using it.
9. Do not use accessories that are not included in the package.
10. This appliance is designed for home use. Do not install it on a ship, in a trailer, or on an airplane.
11. Turn off the water tap if the appliance is not used for a long time. (For example, during a vacation).
12. Disconnect the appliance from the mains and turn off the door locking function so that children are not trapped inside the drum.
13. Packaging materials (for example, film, bags, foam) can harm the child and cause suffocation!

ATTENTION: KEEP THE PACKAGING OUT OF THE REACH OF CHILDREN.

APPOINTMENT OF THE DEVICE

• The automatic front-loading washing machine is designed for washing textiles and outerwear suitable for washing in washing machines.
• This appliance should be used in domestic and similar premises.

NOTE:

• Before washing your clothes, refer to the label of your clothes. The washing machine is intended for indoor use only.

TECHNICAL PARAMETERS

Technical parameters

Technical parameters are indicated on table 1 Table 1

DESCRIPTION OF THE DEVICE

The picture is for reference only and may differ from the actual product

1. Detergent compartment
2. Inlet valve
3. Control Panel
4. Power cord with plug
5. Washing machine body
6. Adjustable feet
7. The drum
8. Door

Notification:

1. Some water may leak out during the first use. This is the residual water after the factory performance test, it is normal phenomenon.
2. After each use, remove the plug from the outlet and turn off the water tap to prevent large amounts of water from spilling or a fire.

DELIVERY SET

• Warranty card – 1 pc.
• Packaging – 1 pc.

INSTALLATION OF THE DEVICE

Installation Instructions

• Do not install the washing machine and do not use it in rooms where the temperature may drop below 0 ° C, or where weather events may affect the operation of the appliance.
• Install the washing machine correctly according to these operating instructions.
• Adjust the feet to provide the necessary ventilation if the appliance is installed on a carpet surface.
• There are too many pests in rural areas. It is necessary to keep the washing machine and the space around it clean, since any damage caused by cockroaches or other pests are not warranty cases.

Transport bolts
The washing machine has installed shipping bolts to prevent internal damage during transportation.
Dismantling of transport bolts

1. In order to avoid internal damage during transportation, 4 bolts are installed on the device. Before using the washing machine, remove these bolts (see Fig. 2)
   • If the bolts are not removed, it will cause the washing machine to break down
2. Using a wrench (included in the package), loosen the 4 bolts (see Figure 2)
3. Turn the rubber gasket slightly and remove the bolts. Save the bolts and wrench in case the machine is re-transported.
   • The bolts should be installed in place in case of transportation of the washing machine.
4. Use the supplied protective covers to cover the bolt holes (see Figure 3).

NOTE

• Do not remove the drain hose retainer.

Installation Requirements

• The device must be installed on a hard, dry, clean, flat surface. Horizontal installation
• The angle of inclination should not be more than 1 degree.
• Observe a distance of 20 mm to the wall or nearby objects (see Fig. 4)

Plug socket

• The distance between any sides of the washing machine and the outlet should be within 1.5 meters.
• Do not plug too many electrical appliances into the outlet into which this appliance is connected.

Cleaning the surrounding space

• It is necessary to clean the wall, door and floor surface around the washing machine.
• Install the washing machine on a firm and stable surface with a drain hole. Do not install the appliance on a soft rubber surface or a wooden floor.
• Do not place dirty clothes or other objects on the top of the washing machine – this may affect the operation of the appliance.

Connecting to a power source

• Do not use the circuit board or similar items.
• If the power cables are damaged, contact an authorized service center.
• After using the washing machine, disconnect the electrical plug and close the water tap.
• The washing machine must be connected to a grounded electrical outlet.
• Place the washing machine in a place where it is easy to plug it into an outlet.
• In case of any breakdowns and malfunctions, contact an authorized service center to repair the washing machine. The actions of non-professionals can cause harm and lead to the breakdown of the washing machine.
• Do not install the washing machine in a place where the temperature is below 0 °C. Hoses can freeze and break. In addition, temperatures below 0 °C may cause the programs on the control panel to break.

Grounding instructions

• The washing machine must have grounding devices. In the event of a malfunction, such a device can reduce the risk of electric shock. The device is equipped with a cable (including a wire and a grounded plug). The grounded plug must be inserted into the appropriate outlet. If you have any doubts about whether the washing machine is properly grounded, contact an authorized service center. If the plug does not fit the outlet, do not change the plug yourself.
• If the washing machine smokes or smells, disconnect the power cord and contact an authorized service center.
• The washing machine must be connected to a water supply source.
• It is necessary to use new hoses to connect the device to the water supply, which are included in the delivery package, reuse of old hoses is not allowed. To check the operability, before the washing machine is released from the factory, water supply tests are carried out, so there may be water inside the drum, on door seals and door panels, which is considered normal.

Connecting the device to a water supply source

• Attention! Do not connect to hot water!

1. The pressure of the water supplied to the device should be in the range from 30 kPa to 1000 kPa.
2. Do not damage the screw thread when connecting the inlet pipes to the valves.
3. Install a pressure relief device if the water supply pressure exceeds 1000 kPa.

• Two gaskets are installed at the ends of both ends of the tube to prevent water leakage.
• Turn on the faucet and check if there is a leak in the connection elements.
• Check the tubes regularly. Replace them with new ones, if necessary.
• Make sure that the tubes are not damaged and do not intertwine with each other.

Connection of water inlet pipes and taps

1. Check the rubber seals on both sides of the hose.
   • Insert a rubber seal into the pipe coupling on each hose to prevent water leakage.(see fig. 5)
2. Connect the water supply hose to the tap manually, and then tighten an additional 2/3 turns with pliers. (see fig. 6)
3. After connecting the water supply hose to the water tap, open it to wash out foreign substances (dirt, sand or sawdust) from the water lines with a jet of water. Drain the water into the bucket and check the water temperature. (see fig. 7)
4. Firmly attach the other end of the hose to the outlet of the washing machine by hand, and then tighten another 2/3 turns with pliers. (see fig. 8)
   • WARNING
   • Do not tighten the hose too much. You may damage the valves, which will lead to water leakage and damage to the device and its components.
5. heck for water leakage by turning on the faucet. If water leaks out, repeat steps 1 through 4.

Installing the drain pipe (see Figure 9)

• Secure the drain pipe with a rope.
• Install the drain pipe correctly to avoid electric shock and spillage of water on the floor
• To avoid the siphon effect, the drain pipe should be installed at a height between (0.85 m – 1.25 m), in addition, the end of the drain pipe should not be immersed in water.
• If the drain pipe is too long, do not force it into the washing machine: this may cause a strange noise.

Horizontal alignment

• To avoid noise and vibration, adjust the horizontal position of the washing machine, preferably install it in the corner of the room.
• If the surface is uneven, adjust the adjustable feet. (Do not place pieces of wood or similar objects under the feet), make sure that the four adjustable feet touch the surface of the floor covering tightly, and the machine is positioned strictly horizontally.
• Adjustment of the adjustable feet. Adjust the adjustable feet so that the washing machine stands horizontally and firmly on the floor surface. After adjustment, tighten the lock nut securely (see Figure 10). Do not place the washing machine on a platform that is above floor level to prevent the machine from accidentally falling.
• Diagonal stability check. Slightly pressing the machine from above in the diagonal direction, you need to make sure that the washing machine does not swing. (It isnecessary to check in the direction of both diagonals, if the washing machine is swinging, it is necessary to adjust the feet).

BEGINNING

Door lock

• After starting the machine, the door locks automatically and the warning “Door Lock” light/image on the control panel turns on.

Unlocking the door

• If the “Door Lock” light/image is on, press the “Start/Pause” button, the washing/draining mode will stop. After 2 minutes, the door lock will unlock automatically.
• If you open the door while the washing machine is running, foam may pour out; wipe the foam with a towel.
• If the temperature is too high, the door will not open during washing
• If the water level is too high, the door will not open during washing

How to use the detergent dispenser

• Use special detergent.
• Do not use too much detergent which will cause too much foam and affect washing quality or will cause malfunction.
• Select detergent according to clothes variety, color, water temperature and contamination level.
• Please use moderate detergent to get washing effect and protect environment.

Recommendations for the use of detergents under different temperature conditions

• When washing heavily soiled white clothes, we recommend using the program (“Cotton”) with a temperature of 60 ° C or higher and a regular washing powder (for intensive washing) containing bleaching substances that at medium / high temperatures provide excellent washing quality.
• For washing at temperatures from 40 °C to 60 ° C, the type of detergent used must match the type of fabric and the degree of contamination. Conventional powders are suitable for “white” or colored fabrics with a high degree of contamination, while liquid detergents or powders for “color protection” are suitable for colored fabrics with a low degree of contamination.
• For washing at temperatures below 40 ° C, we recommend using liquid detergents or detergents specially labeled as suitable for washing at low temperatures.

Before washing

1. Labels on clothing
   • Read the information on the labels on the clothes to determine the type of fabric and the method of washing.
2. Classification of washing
   • Wash clothes from the same and different fabrics, under different temperature conditions, rotation speed and in different programs, separate colored things from white things.
   • Separate dyed cotton items from natural items to avoid staining white items.
   • If possible, do not wash very soiled clothes together with slightly soiled clothes.
3. Notes
   • If you put large and small items in the drum of the machine, first put large items that should make up less than half of the total amount of clothing. Do not wash one thing in the washing machine.
   • This can cause problems with the balance of the machine.
   • Add one or two more of the same items of clothing.
   • Small items such as silk stockings and handkerchiefs should be placed in washing bags. Before washing a bra with steel “bones”, take out the “bones”. If it is impossible to remove the “bones”, place the bra in a washing bag to prevent the “bones” from getting between the inner and outer drum.
   • Check all the pockets and make sure there is nothing in them. Nails, pins, matches, pens, coins and keys can damage the washing machine and clothes.
   • Zip up all zippers on clothes, buttons, tighten belts, make sure that other clothes will not be damaged by such things.
   • First add a small amount of detergent to the water to soak things with a lot of dirt, for example, on the collar and cuffs.
   • Check the O-ring and make sure there is nothing on it.
   • Before washing, make sure that there are no foreign objects inside the drum.
   • Make sure that there are no clothing parts in the door O-ring to avoid damage to the fabric and the door O-ring.

Before the first wash

• To remove the water remaining in the machine after the factory tests, it is recommended to perform a short washing cycle without adding laundry.

1. Open the water tap.
2. Close the machine door.
3. Add a little detergent (about 30 ml) to the main wash compartment
4. Select and run a short washing program – “15′ Quick Wash”

the “Control panel Lock” function by pressing the “Temperature” button and holding it for 3 seconds during washing.

Smart unlock of the door| After the washing is completed, the lock is not removed immediately, but only after draining the water from the tank.
Memory when disconnected| If the power is turned on again after the shutdown, the machine will continue to work from the moment of the last power outage.
Door self-locking| After selecting the program, the door is automatically locked, 2 minutes after the end of washing, the door is automatically unlocked.
Drum cleaning| Use this function to clean the drum from dirt and germs.
Delayed start| Press the “Delayed Start” button to select the washing delay time. When using the “Delayed Start” function for washing, the delay time is 3 hours, 6 hours, 9 hours, 12 hours, 15 hours, 18 hours.
---|---
Rinsing| The “Rinsing” function is ideal for old and hard stains. The function can be selected as an additional step to the selected washing mode.

OPERATION OF THE DEVICE

Control panel functions

• This image is indicative. The control panel of the real product may differ.

1. The “On/Off” button
   • Turn the power supply on or off.
   • After washing, press the button to turn off the device.
2. The “Start/Pause” button
   • Press the button to start the washing machine.
   • Press the button during washing to stop the device, and press it again to continue washing.
3. The “Delayed start” button
   • When using the “Delayed start” function for washing, the delay time is 3 hours, 6 hours, 9 hours, 12 (two indicators will light up on the control panel) (3 + 9), 15 (6 + 9), 18 (3 + 6 + 9).
   • The “Delayed start” function must be used after selecting the program and before pressing the “Start/Pause” button.
   • The time of the “Delayed start” function means the time interval from the assignment of the washing mode to the start of washing.
   • If you want to cancel the Delayed Start function, press the «Отложенный старт» button again.
4. The “Temperature” button
   • After turning on the device by pressing the “Вкл/Выкл” button, selecting the desired washing program, select the water temperature according to the type and degree of contamination of clothing.
5. The “Spin speed” button
   • After turning on the device by pressing the “Вкл/Выкл” button, selecting the desired washing program, select the spin speed according to the type and quantity of items.
6. The “Rinse” indicator
   • If the clothes are heavily soiled, you can choose this program before washing.
   • Press the “Delayed start” button and hold it for 3 seconds to turn on/off the “Rinse” function.
   • NOTE:
   • The pre-washing function is available only with the following main programs Cotton” Children’s clothes Mixed fabrics” Eco Underwear Bed linen After activating the pre-washing function (“Rinsing”), one beep will sound, and the Rinsing” indicator will light up on the panel. If the function is not available for the selected basic washing mode, several beeps will sound.
7. The “Child lock” indicator
   • Press and hold the «Temperature» button for 3 seconds to turn on/off the panel lock function.
   • If the “Child lock” button is enabled, other buttons other than the “On/Off” button are unavailable.
8. Program selection knob
   • Choose a program according to the type and degree of contamination of clothing.

Functions and programs

THE SEQUENCE OF ACTIONS FOR WASHING

1. Preparation
   • Open the door, load the laundry into the drum and close the door.
   • Pull out the detergent dispenser, add detergent and close the dispenser.
   • Check the correct connection of the water supply hose, open the water supply tap
   • Connect the appliance to the mains
2. Press the “On/Off” button
3. Programs are selected according to your needs.
   • Cotton – Mixed fabrics – ECO – Underwear – Children Clothes – Delicate – Bed Linen – Synthetics – 15′ Fast wash – 42′ Fast wash – Sportswear – Outerwear – Wool – Drum cleaning – Spin – Rinse + Spin
4. Press the “Start/Pause” button and start the washing process.
5. After the washing is finished, you will hear a beep.
   • If you want to change the settings during washing, first press the “Start/Pause” button to temporarily pause the device, then select the desired program.
   • Open the door and remove the clothes.
   • Remove the plug from the outlet and turn off the faucet.

The “Cotton” program

• This program is designed for washing moderately or easily soiled clothes, such as cotton, bed linen, underwear, towels, shirts, etc.
• While washing towels in the washing machine, the yarn will shrink, and the surface of the towel will be rough. Use an emollient to prevent such a phenomenon.

The “Mixed fabrics” program

• This function can be used to wash various clothes, such as cotton, and synthetics in fast mode (do not mix clothes that shed easily).
• Separate the white and colored clothes from the dark clothes.

The “Eco” program (Eco 40-60)

• The Eco washing program (Eco 40-60) is suitable for washing cotton products of the usual degree of contamination, which are suitable for washing at a temperature of  40 ° C or 60 ° C in one cycle

The “Underwear” program

• The program for washing underwear.
• Gentle modes of spinning and heating are observed to preserve the integrity of delicate things.

The “Children’s clothes” program

• This program is designed for washing heavily soiled clothes at high temperatures (children’s clothes, clothes of people suffering from allergies, or people with sensitive skin).
• To avoid hot steam burns, after washing is completed, first, open the door of the washing machine and let the steam out, and only then take things out of the drum.

The “Delicate” program

• This function is used for washing delicate, lace fabrics, and silk underwear.

The “Bed linen” program

• This program is designed for washing bed linen, sheets, curtains and other things that can be washed in a washing machine.
• It is forbidden to wash electric blankets and carpets (this may damage the machine and clothes).
• Distribute the laundry evenly in the spin drum to avoid strong vibration and shorten the drying time.
• Put things in a straightened form, not in a stack or in one lump.
• If the laundry is lost, stop the spin, straighten and spread the laundry inside the drum and start the spin program again.

The “Synthetics” program

• It is used for clothes and underwear made of artificial and mixed fabrics, as well as heavily soiled underwear. This mode heats the water to 60 ° C and starts the spin at maximum speed.

The “15′ fast wash” program

• This program is designed for washing frequently changed and not very dirty things, as well as things made of thin materials.
• For best results, the weight of the clothes inside the drum of the washing machine should not exceed 2 kg.

The “42′ fast wash” program

• This program is designed for washing frequently changed and not very dirty things, as well as things made of thin materials.
• For best results, the weight of the clothes inside the drum of the washing machine should not exceed 4 kg.

The “Sportswear” program

• The program is designed to effectively remove dirt from sports items. It provides low-temperature washing at a low speed of rotation of the drum with a short final spin.

The “Outerwear” program

• A special program designed for the delicate care of outerwear. Due to gentle pressing and low temperature, the thing will not spoil.
• For a more gentle effect on outerwear, the speed of rotation of the drum is reduced (up to 400 revolutions per minute) so that the down jackets are not damaged during the spin.
• The water temperature is also below average and is up to 40 degrees – so the color and strength of the material is preserved longer.

The «Wool» Program

• This program is designed for washing woolen things.
• After washing is finished, quickly pull the clothes out of the drum to avoid its deformation. Use a special detergent for washing woolen things to avoid damage and improve the washing effect.
• The weight of the laundry should not exceed 2 kg
• In order to avoid damage to things, the water temperature should not exceed 40 ° C.
• Please separate white or bright clothes from dark clothes for washing.
  The use of a special detergent for wool can reduce the damage to clothes, improve the washing effect.

The «Drum cleaning» program

1. Preparation
   • Before cleaning, make sure that there are no foreign objects in the drum.
   • Pull out the detergent dispenser, add liquid bleach to the main compartment.
   • Do not add detergent or laundry detergent to avoid excessive foam formation.
   • Close the dispenser.
   • Connect the machine’s power cable to the mains and open the cold water tap
2. Press the “On/Off” button.
3. Turn the program selector knob and select the “Drum cleaning” program.
4. Press the “Start/Pause” button
   • The program will start after the door is locked.
5. After the end of the program, you will hear a beep.
   • After cleaning, open the door and wait for the inside of the washing machine to dry to avoid deformation of the gasket.
   • If there are children in the house, do not open the door for a long time.

The “Spin” program

• This program only performs spin.
• To avoid breakage, before starting the spin, make sure that there are no foreign objects inside the drum, such as keys, coins, etc.
• During the rotation of the washing machine drum, the actual rotation speed may not correspond to the speed specified in the program. This is due to the fact that the washing machine adjusts the rotation speed according to the weight of the clothes.
• During the rotation of the drum, a rhythmic buzzing will be heard. This does not indicate a breakdown of the device. This is the standard sound during water draining.

The “Rinse+Spin” program

• This program only performs rinsing and wringing, not washing.
• It adds convenience during operation due to the ability to rinse things more thoroughly and clean them from possible allergens and powder residues.
• You can set the maximum rotation speed of the drum, but you cannot set the temperature.

Washing programs

Program| Temperature ( о C)| Spin (rpm)| Time (min)
---|---|---|---
Cotton| Cold water (20 °C, 40 °C, 60 °C, 90°C)| 800 (0, 400, 1000)| 54
Mixed fabrics| Cold water (20 °C, 40 °C)| 800 (0, 400)| 60
ECO| 20 °C (Coldwater,| 800 (0, 400, 1000)| 52
| 40 °C, 60 °C)| |
---|---|---|---
Underwear| 20 °C (Coldwater, 40 °C)| 800 (0, 400)| 59
Children clothes| 60 °C (40 °C, 90°C)| 800 (0, 400, 1000)| 126
Delicate| 20 °C (Coldwater, 40 °C)| 800 (0, 400)| 48
Bed Linen| 40 °C (Coldwater, 20 °C)| 800 (0, 400)| 68
Synthetics| 40 °C (Coldwater,

20 °C, 60 °C)

| 800 (0, 400, 1000)| 67
15′ Fast Wash| Cold water (20 °C, 40 °C)| 800 (0, 400)| 15
42′ Fast Wash| 20 °C (Coldwater, 40 °C)| 800 (0, 400)| 42
Sportswear| Cold water (20°C,

40 °C)

| 800 (0, 400)| 44
Outerwear| 40 °C (Coldwater, 20 °C)| 800 (0, 400)| 58
Wool| 40 °C (Coldwater, 20 °C)| 800 (0, 400)| 47
Drum cleaning| 60 °C| 800| 75
Spin| –| 800 (0, 400, 1000)| 10
Rinse + Spin| –| 800 (0, 400, 1000)| 16

Notes:

1. Washing time may vary depending on water pressure, type of fabrics, quantity, water temperature.
2. The time displayed on the control panel and the actual washing time may vary.
3. If the rotation speed is too low, the washing efficiency may
4. it will decrease. Increase the rinse time.
5. The most effective programs in terms of energy consumption are usually those that operate at lower washing temperatures and longer duration of the program;
6. Loading the washing machine to the nominal capacity will help to save electricity and water;
7. The spin speed affects the noise and residual moisture content: the higher the spin speed during the spin operation, the higher the noise and lower the residual moisture content;

CLEANING AND MAINTENANCE

• Carry out maintenance of the washing machine to extend the service life of the appliance.
• Disconnect the washing machine from the power supply before cleaning and servicing.

Washing machine body

• After washing, clean the outer surface of the washing machine with a soft cloth. If the housing is heavily soiled, use an appropriate detergent or soap.
• Do not water the appliance body directly with water.
• Do not use polishing powder, solvents, gasoline, alcohol to clean the washing machine body.

Door ring gasket

• After washing, remove dirt, waste, etc. Remove foreign objects.

Cleaning the detergent dispenser

• Clean the detergent dispenser regularly. Remove it and rinse it with clean water, then put it back in.

Cleaning of the universal joint (recommended: once every six months)

• The accumulation of waste will affect the water supply rate at the inlet valve.

1. Remove the flexible hose from the universal connection side.
2. Remove the screw lock by scrolling it in the direction of the arrow.
3. Rinse the inside of the screw lock.
4. Install the cleaned screw lock with a flexible water supply hose on the faucet.

Cleaning the water supply valve on the device (recommended: once every six months)

1. Remove the flexible hose from the washing machine side.
2. Remove the filter screen from the water supply valve.
3. Clean the filter screen with a toothbrush.
4. Install the flexible water supply hose back.

Precautions in case of freezing of the washing machine

1. Cover the faucet and universal connection with a hot towel.
2. Remove the water supply hose and place it in water with a temperature of 50°C.
3. Pour about 2-3 liters of water with a temperature of 50 ° C into the drum.
4. Connect the water supply hose, open the faucet and turn on the washing machine, check the operation of the inlet and outlet pipes.

Cleaning the water pump filter (recommended: once a month)

1. Drain the water and unplug the device. Open the filter cover located on the front of the housing.
   • Attention! If there is hot water inside the pump, perform this action after the water has cooled.
2. Turn the filter counterclockwise and remove it.
3. Rinse the filter.
4. Put the filter back in, turn it clockwise and install the cover.
5. Screw the filter well to avoid water leakage.
6. Do not clean the filter during washing.

Fig. 18
Cleaning the washing machine drum (recommended: once a month)
After using the washing machine for a period of time, dirt may accumulate inside the drum. You can clean the inner and outer parts of the drum by selecting the appropriate program on the control panel.
Attention: Do not put clothes and detergent inside the drum when cleaning.

TROUBLESHOOTING

Conditions that do not indicate the malfunction

The door does not open

| ·        The washing program is running.

·        Clothes are stuck between the door and the door seal.

---|---

There is a smell

| ·        There may be a smell of rubber, since some components are made of rubber.

Little water during rinsing

| ·        The spin-out washing machine does not require a large amount of water for washing.

No water supply

| ·        The faucet is closed

·        The water supply hose is frozen.

·        Clogged filters

Water is supplied in parts

| ·        If the water level decreases, the washing machine automatically supplies water.
Water leaks out during washing| ·        A detergent with excessive foam formation may have been added.

The door does not open

| ·        The washing program is running.

·        Clothes are stuck between the door and the door seal.

---|---

There is a smell

| ·        There may be a smell of rubber, since some components are made of rubber.

Little water during rinsing

| ·        The spin-out washing machine does not require a large amount of water for washing.

No water supply

| ·        The faucet is closed

·        The water supply hose is frozen.

·        Clogged filters

Water is supplied in parts

| ·        If the water level decreases, the washing machine automatically supplies water.
Water leaks out during washing| ·        A detergent with excessive foam formation may have been added.

Troubleshooting

Problem

| Indication| Cause| Solution
---|---|---|---
Control

panel lock

| 3

h

| 6

h

| 9

h

Water supply

| ****

blinks

| ****

✔

| ****

☓

| ****

☓

| 1. The water tap is turned off.

2.       Water supply is cut off or low water pressure.

3.       Water inlet hose is frozen.

4.       Clogged filter.

| 1.       Turn on the tap.

2.       Wait.

3.       Defrost the hose with hot water.

4.       Take off and clean the filter.

Water draining| blinks| ****

☓

| ****

✔

| ****

☓

| ****

1. The water outlet hose is installed too high.

2. The water outlet hose is frozen.

3. The water outlet hose is clogged.

4. The drain hole is clogged.

| 1.       Take off the hose and install it on at least 1 m height.

2.       Defrost the hose with hot water.

3.       Clean the hose and get rid of foreign objects.

4.       Clean water outlet filter.

Door lock

| ****

blinks

| ☓| ☓| ✔| When starting the machine,

the door was loosely closed.

| Make sure the door is securely closed.

Unnatural sound

| ****

blinks

| ****

✔

| ****

☓

| ****

✔

| 1.       Transport bolts are not taken off.

2.       Machine is installed incorrectly in horizontal perspective.

3.       Size and weight of the clothes are not sutable.

4.       Adjustable feet are not fixated correctly.

| 1.       Take off the transport bolts.

2.       Install the machine on the flat and horizontal surface.

3.       Add more clothes.

4.       Tighten the nuts on the adjustable feet.

Unstoppable water supply| ****

blinks

| ✔| ✔| ☓| Close the tap, unplug the machine and contact an authorized service center.
Drum does not rotate| blinks| ☓| ☓| ☓| Close the tap, unplug the machine and contact an authorized service center.

Excessive amount of foam

| ****

Too much detergent is added

| Add the required amount of detergent.

Use the detergent properly.

UTILIZATION, SERVICE LIFE, WARRANTY PERIOD

• The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
• For additional information about actual system of the garbage collection, address to the local authority.
• Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
• After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device.
• The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
• The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.
• www.timberk.ru

Documents / Resources

| timberk T-WM5UM10Q30 Washing Machine [pdf] Instruction Manual
T-WM5UM10Q30, T-WM5UM10Q30 Washing Machine, Washing Machine, Machine
---|---

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>