CAFE LIGHTING AND LIVING 31509 Arielle Bedside Table Instruction Manual
- June 13, 2024
- CAFE LIGHTING AND LIVING
Table of Contents
CAFE LIGHTING AND LIVING 31509 Arielle Bedside Table
Product Information
- The Arielle Bedside Table is a stylish and functional piece of furniture designed for your bedroom. It comes with a table top, four table legs, three knobs, three screws, and six washers. The table top is made of high-quality material, ensuring durability and stability. The sleek design and neutral color of the bedside table make it suitable for any bedroom decor.
- Assembly of the bedside table is required, and the necessary components are included in the package. Please follow the assembly instructions below to ensure proper installation and usage.
Product Usage Instructions
- Carefully turn the bedside table top (Component A) upside down on a soft, level surface. If you have hard surface flooring, place a rug or blanket underneath to protect it.
- Insert the bolt of each table leg (Component B) into the indicated holes on the underside of the table top. Proceed to screw each leg in a clockwise direction until securely tightened. Repeat this step for all four legs.
- Once all four legs are securely tightened, carefully turn the bedside table upright.
- Unscrew the knob (Component C) that is attached to the inside of the drawer fronts. Please note that an allen key is not included, so you may need to use your own.
- Insert an iron washer (Component E) onto each screw (Component D) and thread it through the drawer from the back.
- Place a rubber washer (Component E) over the end of each screw and screw on the knob (Component C). Ensure that you do not overtighten the knob.
Please refer to the provided images and diagrams in the user manual for visual guidance during the assembly process. If you encounter any difficulties or have any questions, please contact customer support at cafelightingandliving.com.au.
Component Checklist
Putting Me Together
- Carefully turn bedside table top (A) upside down on a soft level surface.(use a rug or blanket underneath on hard surface flooring)
- Insert the bolt of table leg (B) into the hole as indicated and proceed to screw leg in a clockwise direction. Repeat for all four legs.
- Once all four legs are securely tightened, carefully turn bedside upright.
- Unscrew knob (C) that is attached to inside of drawer fronts (allen key not included)
- Insert iron washer onto screw (D) and thread through drawer from back.
- Place rubber washer over screw end and screw on knob (C) making sure not to overtighten.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>