UREVO URTM020 Under Desk Treadmill with Auto Incline User Manual

: June 13, 2024
: UREVO

UREVO URTM020 Under Desk Treadmill with Auto Incline

Product Information

The SPACEWALK 2 Model.URTM020 is an Auto Incline Walking Treadmill designed for home use. It is equipped with various features to enhance your walking workout experience.
The treadmill comes with a remote control for easy operation and a CR2032 3V battery for power.

Product Usage Instructions

Before using the SPACEWALK 2 Auto Incline Walking Treadmill, please read and follow the important safety instructions provided in the user manual.
Product Introduction
Make sure the treadmill is placed on a flat and stable surface.
Connect the power cord to an electrical outlet and turn on the power switch. Familiarize yourself with the function menu and remote control buttons for easy operation.
Before Start and Storage
Prior to starting your workout, ensure that you are wearing appropriate workout attire and have proper footwear. Adjust the incline level and speed according to your preference using the function menu or remote control. After use, store the treadmill in a safe and dry place.
How to Use
To begin your workout, stand on the treadmill belt and hold onto the handrails for stability. Start the treadmill by pressing the appropriate button on the remote control or function menu. Gradually increase the speed to your desired pace. To stop, press the stop button or remove your foot from the belt.
Care and Maintenance
Regularly clean the treadmill with a soft cloth and mild detergent. Do not use abrasive cleaners. Lubricate the belt as recommended in the user manual to ensure smooth operation. Keep the treadmill free from dust and debris.
Warranty
The SPACEWALK 2 Auto Incline Walking Treadmill comes with a warranty. Refer to the user manual for warranty details and contact customer service for any assistance or inquiries.
For visual instructions, you can also watch the YouTube video provided.

IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.

CUSTOMER SERVICE

IMPORTANT: FOR UREVO ONLY
For damaged or defective products, questions, replacement parts, or any other service support, please contact our customer service department by the below methods: [email protected]
Response Time: 24-48 hours
Emailing us with the Order ID will be the best method to receive a response during peak business hours.
Website: www.urevosports.com
US Support Hotline: (1)844-998-2473

Hours of Operation:

Monday – Friday: 9 AM – 12 PM; 1 PM – 6 PM (PST)
PLEASE DO NOT RETURN THIS PRODUCT WITHOUT ASKING OUR CUSTOMER SERVICE FIRST.

SCAN THIS QR CORD TO GET THE PRODUCT INSTALLATION OR MAINTENCE VIDEOS

IMPORTANT SAFETY INSTRUCTIONS

DANGER – To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

An appliance should never be left unattended or plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
Return the appliance to a service center for examination and repair.
Do not carry this appliance by supply cord or use cord as a handle.
Keep the cord away from heated surfaces.
Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- Caution – To reduce the risk of injury from moving parts – Unplug before servicing.
- Warning – To reduce the risk of Electric shock –
Unplug before cleaning or servicing.
- Warning – Risk of personal injury – Keep children under the age of 13 away from walking treadmill.
To disconnect, turn all controls to the position, then remove the plug form the outlet.
Connect this appliance to a proper outlet only. See grounding instructions.
This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for including interference that may cause undesired operation.

FCC

This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cetappareilnumerique de la classe B estconforme a la norme NMB-003 du Canada.

SAFETY NOTICE

UREVO-URTM020-Under-Desk-Treadmill-with-Auto-Incline-
FIG-2

With at least 3.28 ft. (1.0 m) of clearance behind.
With at least 2 ft. (0.6 m) clearance on each side.
Always wear athletic shoes their safety.
Keep children under the age of 13 away from this walking treadmill.
18. The maximum weight capacity for this product is 264.5Ibs/120kg. DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
FCC STATEMENT:
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cetappareilnumerique de la classe B estconforme a la norme NMB-003 du Canada.

SAFETY NOTICE

UREVO-URTM020-Under-Desk-Treadmill-with-Auto-Incline-
FIG-2

With at least 3.28 ft.(1.0 m) of clearance behind.
With at least 2 ft.(0.6 m) clearance on each side.
Always wear athletic shoes.
Do not use on uneven ground.
It is strictly forbidden to walk up and down the walking treadmill while walking.
Do not change the incline level of the treadmill by placing objects under the treadmill.
Please keep your sight horizontal to avoid dizziness.
Trampling the treadmill lid is prohibited.
Do not storage as stand up.
Keep feet, hands, and fingers away from moving parts.
Unplug from outlet when not in use.
Do not storage as side stand.
Be carefully of elderly and pregnant woman use .
Never allow more than one person on the treadmill at a time .
Do not walking with pets.
Do not transverse motion.
Children use MUST be under supervised.
Do not backward motion.

SPECIFICATION

Performance indictors| Detailed parameters| Performance indictors| Detailed parameters
---|---|---|---

Product dimension

| 128 x 59.8 x 15 cm|

Net weight

| 26.5 kg
50.8 x 20 x 5.3 inch| 58.43 lbs

Walking Area

| 108 x 43 cm|

Gross weight

| 31 kg
42.5 x 16.9 inch| 68.35 lbs

Maximum load

PRODUCT AND ACCESSORIES

Please carefully check whether the contents of the package are complete and intact
If there is any missing and damage, please contact the seller.
Accessories

PRODUCT INTRODUCTION

UREVO-URTM020-Under-Desk-Treadmill-with-Auto-
Incline-FIG-9

BEFORE START AND STORAGE

Take out appliance from packages.

Unbox and take out accessory box.
Lift out appliance and place at flat surface.
- Attention: 2-3 persons assist is necessary.
Its normal that visible welding marks residual on walk belt.

Transportation

If transportation needs, unplug power cord and lifting the terminal of appliance.
Easy to transport appliance with bottom transportation wheel assists, like as wheelbarrow.

Connect the power

Storage

Choose flat ground to place the Walking Treadmill. Do not place it on thick and soft cushion.
Plug in power cord and switch on power rock button, you can hear a Bi sound from buzzer, its means the circuit of appliance has connected with power electricity.

Warning: MUST use power cord with comes of package.
Power off appliance and unplug power cord before storage process.

Warning:

Before starting to workout with this product, Please assess your physical condition and perform exercise properly and regularly.
Incorrect or excessive training can be harmful to your health, If you feel unwell, Stop exercising immediately and consult with your doctor.

UREVO-URTM020-Under-Desk-Treadmill-with-Auto-Incline-
FIG-13

REMOTE CONTROL

Romote control can be stored in side of body as shown figure. UREVO-URTM020
-Under-Desk-Treadmill-with-Auto-Incline-FIG-14

How TO USE

Note: Ensure that the walking treadmill is power on and the remote control is installed with battery.

Operation of Remote Controller

Auto incline feature introductior

3 incline levels: 0 – 1 – 2-3
Level 1 : Approx 5% incline percetange
Level 2: Approx 7% incline percetange
Level 3: Approx 9% incline percetange

Change the incline of working treadmill as desired. UREVO-URTM020-Under-Desk-
Treadmill-with-Auto-Incline-FIG-17

Friendly remind of Auto incline features
Incline level should be set to “Zero ” with remote control when you are finished exercising.
Perform POST (Power On Self Test) to identify inline level and back to ” Zero” automatically.
Incline interval up to 20 seconds, total incline stroke ” from Zero to Level 3 ” approximately 1 minute.

Error Code

When error occurs, error warning indicator will light up and display its error code.

Error Code Fault Analysis Resolutions

E01| Communcation interrupted between contoller and numercic display.| Unscrew motor hood and verify connection between controller and numeric display.

Please contact with after sale service if E01 code has not been eliminated .

Notice: Always power off and unplug power cord before processing.

---|---|---
E02| Flame protection| 1. Unscrew motor hood and verify connection between controller and motor.

2. Power supply interrput due to connector loosen or out, please unscrew motor hood to check.

3. Please contact with after sale service if problem CAN NOT solved by

above process.

E05| Over current protection| 1. Due to user over limited 120Kg.

2. Open to check any foreign objects blocked moving parts. ( such as: drive motor, idler roller, driver roller, walking belt)

3. Walking belt is overtightened or lack of lubricant. ( please see detail

chapters relate to belt tension and lubricant process)

E06
E07| Software bug| Replace new controller.

E08

| Communcation interrupted between signal cable and console.| 1. Unscrew console box and verify connection between singal cable and console.

2. Unscrew console box and verify internal lead wires whether are damaged or pierced.

3. Replace new console PCBA board.

Not only error code appeared but also built in buzzer alarm, Once error code and alarm happened, you MUST stop workout immediately, Please contact with after sale service if problem CAN NOT be solved after restart.

Troubleshooting

No working| 1. Power rock switch dyfunction.

2. Power supply interrputed.

3. Power cord damaged.

| 1. Replace new power rock switch if it doesn’t light on.

2. Make sure that power cord is plugged into properly grounded outlet.

3. Replace new power cable.

---|---|---
Walking belt slips| Walking belt loosen.| Tighten walking belt tension with hex tool. (See details of chapter 11-A)
Remote control does not work| 1. Incorrect use of default.

2. Battery power shortage.

3. Remote control maulfunction.

| 1. Remotor control should directly aiming to receiver port when in use.

2. Replace new battery cells.

3. Replace new remote control.

Friction noise| Walking belt off center.| See details of chapter 11-A.
Incline doesn’t working| 1. Incline motor dysfunction.

2. Incline mechanism damaged.

| Contact with after sale service to replace inline motor or gear box.

CARE AND MAINTENANCE

A. Symptom: walk belt off centered or slips.

Centering walk belt process as follow:

Power off appliance and unplug the power cord.
Manual centering process as follow:
- If the walk belt has shifted to left, use the hex tool to turn the left idler roller screw clockwise 1/4 of a turn(refer to figure 1).
- If the walk belt has shifted to right, use the hex tool to turn the right idler roller screw clockwise 1/4 of turn(refer to figure 2).
Appliance MUST work 1-2mintutes. Repeat manual centering process untill the walk belt is centered.

Belt slip correcting process as follow :

Power off appliance before operation.
Using the hex tool, turn both idler roller screws clockwise 1/2 of turn (refer to figure 3).
After corrected, please attempts to walking 1-2 minutes under 1.0mph speed setting. Repeat until the walk belt is properly tightened.

Attentions

To prevent any injury, don’t place any debris around appliance before maintenance process.
MUST use associated hex tool.
Take care at maintenance process. Do not pinch fingers.

B. Belt lubrication process, follow instruction below to lubricate belt.

Power off appliance and unplug cord.
Using the hex tool, turn both idler roller screws counterclockwise till belt loosen and lifting easily.
- Tips: please markdown hex tool rotating cycles when loosen belt, which use for adapting belt tension after lubrication process.
Lifting edges of belt and spraying lubrication oil at center of walk platform evenly. Not necessary to apply spray lubrication oil on entire walk platform.
Lubrication oil volume Per time of maintenance: 5-10mL.
- Attention: it would causes of belt slip if spray too much.
Using the hex tool, turn the both idler screws clockwise as previous markdown number of turns untill walk belt tighten properly.
Power on appliance and workout for a few minutes, in order to spread lubrication oil to whole belt surface evenly.
Lubrication frequency: High recommend 125 Miles Per time.

C: Appliance cleaning.

Power off appliance and unplug power cord before cleaning.
Wipe and clean with damp cloth, Do not cleaning with acidic or caustic detergents.
Do not clean opposite of walk belt.
Its normal few black powders residual under appliance after long working.

WARRANTY

MANUFACTURER’S LIMITED WARRANTY
UREVO warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with UREVO Owner’s Manual. UREVO’s obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
Structural Frame 1 year For Home Use Only
All Other Components 90 days For Home Use Only
Exclusions from Warranty Coverage:
UREVO does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:

Improper installation and/or failure to abide by UREVO’s installation guidelines;
Use of this product beyond normal home use, or in an application for which it was not designed;
Cosmetic items such as scratches, dents or discolorations;
Damage caused by normal wear and tear, vandalism, accidental or by animals;
Any act of Nature (such as fire, flooding, snow, ice, hurricanes, earthquakes, lightnings or other natural disasters), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.);
Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to among other things, flake, chalk, accumulate dirt or stains.
Improper operation, alteration, handling, storage, abuse or neglect of the products.

UREVO, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use.
Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product’s warranty.
This warranty is offered only to the original purchaser and is not transferable. Proof of original purchase is required.

When ordering replacement parts please have the following information ready:

Order Number
Description of Parts (Adding photos or videos would be helpful)
Part Number
Date of Purchase

Manufacturer: Shenzhen Yile Dynamic Technology Co., LTD. Address: 1205-1206, Tianliao Building, Tangchang Road, Tanglang Community, Taoyuan Street, Nanshan District, Shenzhen, China

Documents / Resources

| UREVO URTM020 Under Desk Treadmill with Auto Incline [pdf] User Manual
URTM020 Under Desk Treadmill with Auto Incline, URTM020, Under Desk Treadmill with Auto Incline, Treadmill with Auto Incline, Auto Incline
---|---