UREVO SPACEWALK E3 Walking Treadmill User Manual

UREVO SPACEWALK E3 Walking Treadmill

Product Information

customerservice.
Important Safety Instructions| This section contains crucial safety guidelines that must be followed during product usage.
Safety Notice| This section highlights important safety notices regarding the product.
Specification| This section provides detailed specifications of the product.
Product and Accessories| This section lists the main product and its accompanying accessories.
Product Introduction| This section introduces the product and its features.
Before Start and Storage| This section explains the necessary steps to take before starting and storing the product.
Function Menu| This section provides information about the various functions available in the product menu.
Remote Control| This section explains how to use the remote control to operate the product.
How to Use| This section provides detailed instructions on how to use the product effectively.
Care and Maintenance| This section outlines the recommended care and maintenance practices for the product.
Warranty| This section provides information about the warranty coverage for the product.

Product Usage Instructions

1. Read the “Important Safety Instructions” section carefully before using the product.
2. Familiarize yourself with the product and its features by reading the “Product Introduction” section.
3. Ensure that you have all the necessary accessories listed in the “Product and Accessories” section.
4. Before starting the product, follow the steps mentioned in the “Before Start and Storage” section.
5. Use the remote control as described in the “Remote Control” section to operate the product.
6. Refer to the “Function Menu” section to understand and utilize the various functions available in the product menu.
7. Follow the instructions provided in the “How to Use” section for effective usage of the product.
8. Adhere to the recommended care and maintenance practices mentioned in the “Care and Maintenance” section to prolong the product’s lifespan.
9. Consult the “Warranty” section for information regarding warranty coverage.

CUSTOMER SERVICE

IMPORTANT: FOR UREVO ONLY
For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods: [email protected]
Response Time: 24-48 hours
Emailing us with the Order ID will be the best method to receive a response during peak business hours.
Website: www.urevosports.com
US Support Hotline: (1 )844-998-2473
Hours of Operation:
Monday- Friday: 9 AM – 12 PM; 1 PM – 6 PM (PST)
PLEASE DO NOT RETURN THIS PRODUCT WITHOUT ASKING OUR CUSTOMER SERVICE FIRST.

SCAN THIS QR CORD TO GET THE PRODUCT INSTALLATION OR MAINTENCE VIDEOS:

IMPORTANT SAFETY INSTRUCTIONS

DANGER – To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended plugged in. Unplug from outlet when not in use,and before putting on or taking off parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Caution – To reduce the risk of injury from moving parts – Unplug before servicing.
13. Warning – To reduce the risk of Electric shock – Unplug before cleaning or servicing.
14. Warning – Risk of personal injury – Keep children under the age of 13 away from walking treadmill.
15. To disconnect, turn all controls to the position, then remove plug form outlet.
16. Connect this appliance to a properly outlet only. See grounding instructions.
17. This appliance is not intended for use by persons with reduces physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this walking treadmill.
18. The maximum weight capacity for this product is 264.5Ibs/120kg. DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

FCC STATEMENT **

**

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with RSS2 of Industry Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence.

Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This Class B digital apparatus complies with Canadian ICES-003.

SAFETY NOTICE

SPECIFICATION

Performance indictors| Detailed parameters| Performance indictors| Detailed parameters
---|---|---|---
Product dimension| 126.5X53X 12.4cm| Net weight| 25kg
49.8 X 20.87 X 4.88 inch| 55.11 lbs
Walking Area| 102.4X40 cm| Gross weight| 28.5 kg
40.32X 15.75 inch| 62.84 lbs
Maximum load| 120 kg| Rate voltage| 110 -120V ~
264.5 lbs| Rated power| 550W ( Walking treadmill )
Maximum speed| 4mph| Peak horsepower| 2.25Hp
Minimum speed| 0.6 mph| Suggested age| 14-60 years old
Manual incline percentage| 3%| I| I

PRODUCT AND ACCESSORIES

Please carefully check whether the contents of the package are complete and intact. If there is any missing and damage, please contact the seller.

Accessories

PRODUCT INTRODUCTION

BEFORE START AND STORAGE

• Take out appliance from packages.
• Transportation
• Connect the power
• Storage

Warning: Before starting to workout with this product, Please assess your physical condition and perform exercise properly and regularly. Incorrect or excessive training can be harmful to your health, If you feel unwell, Stop exercising immediately and consult with your doctor.

FUNTION MENU
Tips: The workout datas (Calorie; Time; Step; Distance; Speed) will be circularly displayed per Ss.

REMOTE CONTROL

A magent built in remote control so that it can be stuck in storage cavity of side body as shown in figure.

HOWTO USE

Note: Ensure that the walking treadmill is power on and the remote control is installed with batteries.

1. Operation of Remote Controller

2. Instructions for Incline stand use
   The unique foldable incline options that provides users of ability to increasing the intensity of exercise, you saw commensurate increases in fitness.

3. Error Code
   When error occurs, error warning indicator will light up and display its error code. ErrorCode| Fault Analysis| Resolutions
   ---|---|---
   ED2| Mosfet breakdown| Please contact with after sale service.
   EDS| Flame protection| Unscrew motor hood and verify connection between controller and motor, otherwise please contact with after sale service.
   ED6|

Motor open circuit

| Unscrew motor hood and verify the motor terminals connection . Otherwise please contact with after sale service.
ED7| Communcation interrupted| Unscrew motor hood to verify signal cable whether was pinched or terminal loosen.
EDS| Overloading protection| 1.   User weight over limited 120KG.

2.  Removal foreign bodies which causes of roller or walking belt.

3.  Inject lubricants.

4. Troubleshooting**
   Problem| Fault Analysis| Resolutions
   ---|---|---
   No working**| 1.  Power rock switch dyfunction

2.  Power supply interrputed.

3.  Power cord damaged

| 1.  Replace new power rock switch if it doesn’t light on.

2.  Make sure that power cord is plugged into properly grounded outlet.

3.  Replace new power cable.

Walking belt slips| Walking belt loosen| Tighten walking belt tension with hex tool. (See details of chapter 11-A)
Remote control does not work| 1.  Incorrect use of default

2.  Battery power shortage.

3.  Remote control maulfunction

|

1.  Replace new battery cells.

2.  Replace new remote control.

Friction noise| Walking belt off center.| See details of chapter 11-A.

CARE AND MAINTENANCE

Symptom : walk belt off centered or slips.

• Centering walk belt process as follow:

1. Power off appliance and unplug the power cord.
2. Manual centering process as follow:
  * If the walk belt has shifted to left, use the hex tool to turn the left idler roller screw clockwise 1/4 of a turn(refer to figure 1 ).
  * If the walk belt has shifted to right, use the hex tool to turn the right idler roller screw clockwise 1/4 of turn(refer to figure 2).
3. Appliance MUST work 1-2mintutes. Repeat manual centering process untill the walk belt is centered.

• Belt slip correcting process as follow:

1. Power off appliance before operation.
2. Using the hex tool, turn both idler roller screws clockwise 1/2 of turn (refer to figure 3).
3. After corrected, please attempts to walking 1-2 minutes under 1.0mph speed setting. Repeat until the walk belt is properly tightened.

• Attentions
  • To prevent any injury, don’t place any debris around appliance before maintenance process.
  • MUST use associated hex tool.
  • Take care at maintenance process. Do not pinch fingers.

Belt lubrication process, follow instruction below to lubricate belt.

1. Power off appliance and unplug cord.

2. Using the hex tool, turn both idler roller screws counterclockwise till belt loosen and lifting easily.
   Tips: please markdown hex tool rotating cycles when loosen belt, which use for adapting belt tension after lubrication process.

3. Lifting edges of belt and spraying lubrication oil at center of walk platform evenly. Not necessary to apply spray lubrication oil on entire walk platform.

4. Lubrication oil volume Per time of maintenance: 5-10ml.
   Attention: it would causes of belt slip if spray too much.

5. Using the hex tool, turn the both idler screws clockwise as previous markdown number ofturns untill walk belt tighten properly.

6. Power on appliance and workout for a few minutes, in order to spread lubrication oil to whole belt surface evenly. Lubrication frequency: High recommend 125 Miles Per time.

Appliance cleaning.

1. Power off appliance and unplug power cord before cleaning.
2. Wipe and clean with damp cloth, Do not cleaning with acidic or caustic detergents.
3. Do not clean opposite of walk belt.
4. Its normal few black powders residual under appliance after long working.

WARRANTY

MANUFACTURER’S LIMITED WARRANTY
UREVO warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with UREVO Owner’s Manual. UREVO’s obligation under this warranty applies to the following:

COMPONENT LENGTH OF WARRANTY

• Structural Frame 1 year For Home Use Only
• All Other Components 90 days For Home Use Only

Exclusions from Warranty Coverage:
UREVO does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:

1. Improper installation and/or failure to abide by UREVO’s installation guidelines;
2. Use of this product beyond normal home use, or in an application for which it was not designed;
3. Cosmetic items such as scratches, dents or discolorations;
4. Damage caused by normal wear and tear, vandalism, accidental or by animals;
5. Any act of Nature (such as fire, flooding, snow, ice, hurricanes, earthquakes, lightnings or other natural disasters), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.);
6. Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to among other things, flake, chalk, accumulate dirt or stains.
7. Improper operation, alteration, handling, storage, abuse or neglect of the products.

UREVO, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product’s warranty. This warranty is offered only to the original purchaser and is not transferable. Proof of original purchase is required.
When ordering replacement parts please have the following information ready:

1. Order Number
2. Description of Parts (Adding photos or videos would be helpful)
3. Part Number
4. Date of Purchase

IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice.
Manufacturer: Shenzhen Vile Dynamic Technology Co., LTD.
Address: 1205-1206, Tianliao Building, Tangchang Road, Tanglang Community, Taoyuan Street, Nanshan District, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>