DOXCOT C10e64X2d6L Retractable Pet Gates For Dogs Instruction Manual

June 13, 2024
DOXCOT

DOXCOT C10e64X2d6L Retractable Pet Gates For Dogs Instruction Manual
DOXCOT C10e64X2d6L Retractable Pet Gates For Dogs

SAFETY INFORMATION

WARNINGS

WARNING To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions.

WARNING Incorrect installation can be dangerous.

WARNING Danger to older children if climbing over the product.

WARNING Do not use the safety barrier if any components are damaged or missing.

WARNING The safety barrier must not be fitted across windows.

WARNING Never install this product on glass doors. Install this product against reliable doors or walls.

WARNING If the safety barrier is used at the top of the stairs, it should not be positioned below the top level.

WARNING If the safety barrier is used at the bottom of the stairs, it should be posit.

WARNING  This satiety barrier is for domestic use only.

WARNING This satiety has a manual closing system.

WARNING Never leave the child unattended when using this product.

WARNING Children have died or been seriously injured when gates/enclosures are not securely installed.

WARNING Do not put any goods which can be grabbed by children or pets near this product to prevent injury.

WARNING Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened. Never use to k

WARNING Never use to keep child away from pool.

WARNING This product is intended for use with children from 6 to 24 months or small to medium pets from 4.5kg(10 Ibs) up to 18kg (40 Ibs).

WARNING Always check that safety barrier is correctly closesd.

WARNING Use only with the locking/latching mechanism securely engaged

WARNING Gate must be installed as close to the ground as possible, as per the installation guides.

WARNING Never use with a child able to climb over or dislodge/open the gate or encl

WARNING Regularly check that the safety barrier is properly installed and secure.

WARNING Always install and use as directed using all parts. Any additional or replacement parts should be obtained from after sales support.

WARNING Barrier must be fitted between rigid surfaces such as plaster board ,timber or hard wall.

WARNING The gate extends up to 55″ wide and 33″ tall, the minimum width of the opening is 27.6in,maximum width of opening is 55in,the best width of opening is 35.4in.

WARNING The gate extends up to 59″ wide and 33″ tall, the minimum width of the opening is 27.6in,maximum width of opening is 59in,the best width of opening is 35.4in.

WARNING The gate extends up to 77″ wide and 33″ tall, the minimum width of the opening is 27.6in,maximum width of opening is 77in,the best width of opening is 35.4in.

MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface(wall, door frame, stair posts, etc) is strong, rigid and has an even surface.

Note: If using gate on stairs, it must be placed either on the top step or on the lowest step at the bottom.

Select the appropriate fixing method from the following list.

WOOD MOUNTING
Drill 5/64”(2mm) pilot holes and use the wood screws provided screwing directly into the wood.

FOR INSTALLATION
Wood Screws

DRY WALL MOUNTING
Locate the wood stud and follow the ‘wood mounting instructions. Do not mount into dry wall without
MOUNTINGS

HARD WALL MOUNTING BRICK
Drill 5mm (3/16″) pilot holes, insertanchor and secure with screws.

FOR INSTALLATION
Wood Screws Anchor

HARD WALL MOUNTING CONCRETE
Drill 3/16” (5mm) pilot holes, insert anchor and secure with screws.
MOUNTINGS

This gate must only be fixed to a solid and secure surface. If unsure, check with a qualified builder or trades person that the installation you intend is suitable and safe within the chosen location.

TOOLS PREPARATION:

  • A. Philips head screw driver

  • B. Pencil

  • C. Power drill

  • D. Hammer

PLEASE SELECT THE PROPER ACCESSORIES AND A SUITABLE WALL.

  • Install on wooden material.
    ACCESSORIES

  • Install on a hard wall.
    ACCESSORIES

  • Do notinstall onto dry I wood, or glass walls.
    ACCESSORIES

MEASUREMENT PREPARATION :

Measure the door width to ensure that the gate can be installed normally.

WHAT’S IN THE BOX

PARTS
PARTS
PARTS

INSTALLATION

GATE PLACEMENT

SUITABLE PLACEMENT OF GATE AND CATCH MOUNT

Inside Opening or Doorway
INSTALLATION

Outside Opening or Door Way
INSTALLATION

INSTALLATION STEPS

Nots:

Thank you very much for purchasing this product. The whole installation process takes about 20 minutes. Please read the installation manual carefully, find the corresponding components and select the right location to be installed. Please prepare an electric drill, a mark pen and a screw driver.

The product must be installed on the ground to better realize the separation function.

  1. Main body Gate .
    INSTALLATION STEPS

  2. Install Upper Bracket on the Gate.. ?
    INSTALLATION STEPS

  3. Install Lower Bracket on the Gate.
    INSTALLATION STEPS

  4. Select the installation location, make sure the bottom of the main body door Gate is on the ground, and then mark the holes position of the Upper Bracket with a pen.
    INSTALLATION STEPS

  5. If there are without baseboard on the wall Mark the holes position of the Lower Bracket with a pen and please keep the gate vertical.
    INSTALLATION STEPS

  6. If there are baseboard on the wall, Please slide Lower Bracket up to the suitable position until go around the baseboard and mark the holes position of the Lower Bracket with a pen.
    INSTALLATION STEPS

  7. Take out Upper Bracket from Gate according to the arrow.
    INSTALLATION STEPS

  8. Take out Lower Bracket from Gate according to the arrow
    INSTALLATION STEPS

  9. Drill Upper Bracket to wall as the marks
    INSTALLATION STEPS

  10. Drill Lower Bracket to wall as the marks
    INSTALLATION STEPS

  11. Install Gate to Upper Bracket as the arrow
    INSTALLATION STEPS

  12. Install Gate to Lower Brackets the arrow please make sure install Gate to Upper Bracket at first then install Gate to Lower Bracket.
    INSTALLATION STEPS

  13. Pull the cloth horizontally to the opposite door frame to find the installation position of Latches
    INSTALLATION STEPS

  14. Press the button to lock
    INSTALLATION STEPS

  15. Hook the upper Latches and mark the holes position of the upper Latches with a pen and make sure the gate is Vertical.
    INSTALLATION STEPS

  16. Hook the lower Latches and mark the holes position of the lower Latches with a pen and make sure the gate is Vertical.
    INSTALLATION STEPS

  17. Pull the cloth, then press the button to unlock, Let the cloth roll back.
    INSTALLATION STEPS

  18. Drill the upper Latches to wall as the marks,
    INSTALLATION STEPS

  19. Drill the lower Latches to wall as the mar
    INSTALLATION STEPS

  20. The installation is complete. Enjoy your gate.
    INSTALLATION STEPS

  21. Enjoy your gate!
    INSTALLATION STEPS

ADJUSTABLE LOWERGATE MOUNT

INSTALLATION STEPS

TO REMOVE
  1. Press the button

  2. When press the button and also put upward the gate from the Bracket at the same time.
    TO REMOVE

OPERATION

HOW TO LOCK THE GATE

HOW TO LOCK THE GATE
Note: When gate is retracting always hold the handle and guide the gate evenly back into its original position. Never let go of handle when gate is retracting.

HOW TO OPEN THE GATE

HOW TO OPEN THE GATE

CLEANING INSTRUCTIONS

Simply use a soft damp cloth to wipe gate, dry after cleaning. Do not use chemical or abrasive cleaners.
LEANING INSTRUCTIONS

Thank you very much for choosing our products. Please read instruction manuals carefully before using this retractable safety gate. Do not use if any part is Broken, Torn or Missing. Please retain the instruction manual for future reference.

If you have any questions about our products, please contact our after- sales email at[email protected]

Company Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals