drinkup 17P Smart Thermos Bottle User Manual

drinkup 17P Smart Thermos Bottle User Manual

drinkupbottle.com

Introduction to DrinKup

Packaging & Accessories

Product Precautions

Cleaning the Smart Lid

• To prevent damage to the water resistance of the smart cap, do not use sharp objects when cleaning the smart cap.
• Use a soft sponge with warm water and a little detergent to clean the smart lid.
• Do not submerge the smart cap into water to prevent damage to the electronic components.

Cleaning the Bottle

• Use a soft sponge with a long handle and apply warm water and neutral detergent to clean.
  After washing, rinse thoroughly and wipe dry.

• Clean the surface of the bottle with soft cloth or moist sponge using mild detergent. The product must be thoroughly cleaned before and after use.

• The inside of the bottle should be completely dry, when the bottle will not be used for a long period of time.

• For regular maintenance, use food grade vinegar + water (ratio 1:10) and let it sit for 30 minutes before rinsing out.

Start Using DrinKup

Suggest to use iOS 9.0 or Android 4.4 and above for the best experience.

1. Charge the Smart Lid
   (1) Before using DrinKup smart bottle, please charge the smart lid to prevent no power when setting up the device and help prolong the battery life.
   (2) During charging, the smart lid will light up when charging is in progress. The light will turn off when charging is completed.
   (3) Smart lid will on automatically once it starts charging.
   (4) Place back the waterproof rubber seal when charging is completed and turn counter clockwise to close the waterproof protective ring on the lid before turning on. (For charging details, please refer to the P 11 Charging the Smart Lid section.)

2. Secure the Smart Lid on the Bottle Before using DrinKup, ensure that the smart lid is fully screwed on to the bottle. If not, the smart lid will not display any signal. Before using it is recommended to hand wash the bottle first (For more information, please refer to P3 Product Precautions Section)

3. Download the DrinKup App After you have installed the app, please open the app and follow the steps to register your DrinKup account or log in to your registered account. After that, please follow the steps from the app to pair your DrinKup with your smart device to ensure the information can be sync between your DrinKup and the DrinKup App.

4. Start using DrinKup after finishing pairing
   If your DrinKup is nearby and bluetooth on your smart device is on, it will sync automatically when you open the DrinKup app.

Smart Lid Operation Instructions

1. Secure the Smart Lid on the Bottle
   Before using DrinKup, ensure that the smart lid is fully screwed on to the bottle. If not, the smart lid will not display any signal.
   Before using it is recommended to hand wash the bottle first (For more information, please refer to P 3 Product Precautions Section)

2. How to turn on:
   Smart lid will on automatically once it starts charging.
   (For charging details, please refer to the P 11 Charging the Smart Lid section.)

3. How to turn off:
   DrinKup will last for 30 – 90 days on a full charge, user do not need to turn it on/ off everyday.
   (1) Go to “Setting”
   (2) Select a DrinKup that you want to turn off
   (3) Click “Turn Off” button beside “Smart Lid”
   (4) Click “Confirm” on the pop up window
   (5) The word “Power off” will shown beside “Smart Lid” and a “OFF” signal will appear on your smart lid when it is successfully turned.

Basic Functions

1. Hydration Balance Detection
   After taking a drink from the smart bottle, close the smart lid tightly. Place it on a flat surface or hold it steady for 5 seconds and it will finish recording.

2. Water Balance Status Display Close the smart lid tightly, keep it steady for 1 second and tilt it to read your hydration status.

3. Temperature Detection
   Flip DrinKup upside down for a few seconds until it vibrate and turn the bottle back in its upright position, the screen will automatically show the current temperature of the water in the bottle. (It normally takes 5 – 8 seconds)
   

4. Temperature Too Hot Display
   With the smart lid tightly on and water temperature is above 50°C (122.0 °F), when you turn open the smart lid it will display a “HOT” on the LED.

5. Stale Water Display
   When the smart bottle has not been used for more than 24 hours, opening the smart lid will display a “X” to show the water is stale.

6. Turn On/ Off Smart Lid Alert
   Smart lid will vibrate once your water intake level is lower than 80%.
   You can turn on/ off smart lid vibration alert via DrinKup app.
   Step 1: Select “Setting” at bottom right to find “Bottle settings”.
   Step 2: Select a DrinKup that you want to turn off it’s vibration notification.
   Step 3: Click “Turn On” or “Turn Off” beside “Vibration Notification” and click “save”.
   Step 4: Smart Lid will appear turn on/off signal as well when it is successfully turned on/off.

Smart Lid Display Overview

How to hard reset my DrinKup?

Flip open the USB port rubber piece.
Push in the small hole located under the USB charging port with a paper clip until you see the lid display “ON”.

(Reset button located under the USB charging port)

Reset button located under the USB charging port.

Charging the Smart Lid

After fully charging the smart lid, DrinKup will work from 30~90days before the next charge. Actual time will depend on how you use the device.

Smart Lid charging instruction：
Before using DrinKup smart bottle, please charge the smart lid to prevent no power when setting up the device and help prolong the battery life.
1. Make sure the smart lid is completely dry
Please make sure that the lid is dry before charging with the USB.

2. Low Battery Display
When your battery is running low, the LED will display the battery charge icon when you screw the lid tightly on the DrinKup bottle. Your DrinKup will continue to record your hydration information until the battery runs out.
You can also use the DrinKup app to check the battery life of your DrinKup.

3. Open Waterproof Protective Ring

4. Open up Waterproof Rubber Seal

5. Plug in USB cable

6. Charging Display
This display indicates your smart lid has lower than 10% battery left, a charging display will appear if you keep charging it.

Charging will take 1 to 2 hours. The LED will turn off when charging is complete.

7. Close Waterproof Rubber Seal

8. Close Waterproof Protective Ring Please be reminded to cover the USB seal completely and turn the protective ring to left when you are going to wash or start using your DrinKup to prevent water damage.

Safety & Precautions

• Follow the instructions carefully before charging the product.

• Do not use any damaged power adapters or USB cables.

• Do not twist or pull the USB cable. Damaged USB cable may cause risk of electric shock, short circuit, and fire.

• Do not modify, change, drop, or cause damage to the product .

• In the case you encounter problems with the installation or use of the product, do not use force to avoid damaging the product.

• Avoid charging in hot or humid environments to prevent sparks and electric shock.

• Make sure to dry hands before removing the charging cable to avoid danger and damage to the product.

• If the device is not used for long periods of time, charge the battery once every three months to prolong the battery life and prevent damage to the device.

• Do not use a power adapter other than DC 5V.

• Charge battery between temperatures of 0° and 40° C (32° to 104° F).
  Charging the device in higher temperatures may cause the damage to the device.

• Do not let water come in contact with the battery.

• Do not place the smart lid with metal objects. Metal objects that contact with the positive and negative terminals of the Micro USB may cause a short circuit or damage to the device.‧ Improper use of the product may result in fire, explosion, or other hazards.

• Do not place the smart lid close to a fire to avoid explosion.

• Do not use the product as a toy to play with children and please place it in safe areas.

• Dispose a damaged smart lid in accordance with your local regulations.

• Do not use the smart lid with other bottles not designed by DrinKup.

• Do not drop the smart lid on the ground.

• Do not use dishwasher or a dish dryer.

• Do not use abrasive powder, metal cleaning balls, cleaning naphtha, or cleaners containing chlorine to avoid scratches, rust, or corrosion on the surface of the product.

• Do not use dry ice or carbonated drinks to prevent pressure from rising, which may cause the smart lid to eject or get stuck.

• Do not fill with acidic drinks, liquids containing salt or hot soups.
  These liquids make cause poor insulation function.

• Milk, beans juices, fruit juices and other drinks should be consumed within 30 minutes to avoid corruption.

• Do not heat it in a microwave.

• Do not boil it.

• Do not place in the refrigerator or freezer.

• Do not use the smart bottle for anything other than keeping drinks cold or hot.

• Be careful when storing hot drinks in the bottle.

• Do not open the smart lid while the bottle is titled or near your face.

FCC warning

FCC warning：
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference and.
2. this device must accept any interference received, including interference that may cause undesired operation of the device.

Federal Communications Commission (FCC) Statement
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

IC warning

Industry Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Class B Emission Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.

Warranty Policy

1. DrinKup provides
   DrinKup provides a period of 1 year warranty from the date of shipment.

2. Warranty Policy
   The warranty does not cover defects or malfunction caused by misuse, abuse or improper maintenance, failure to follow operating instructions, or use with equipment with which it is not intended to be used. It does not cover cosmetic or incidental damages.

3. Cancel Or Return
   Please contact us at service@mydrinkup.com and provide your order number to cancel the order. If the order has been shipped, the order cannot be canceled.
   Please refer to our return process at
   https://drinkupbottle.com/pages/returns for more information.

4. Questions and Suggestions
   We are happy to hear your comments or suggestions about the product.
   Please contact us at service@mydrinkup.com. We are committed to providing quality products and quality customer service.

Product Specifications

Name：DrinKup Smart Bottle
Capacity：500ml (17oz)
Colors：Artic White / Midnight Blue
Coral Red / Lemon Yellow
Dimension(CAP +BOTTLE)：H249mm x W73mm
Bottle Materials：Stainless Steel 18-10
Lid Materials：Aluminum Alloy 6061,
Food Grade Polypropylene(PP),
High grade Tritan (BPA free plastic)
Smart Screen：5 x 16 LED lattice screen
Battery Specs：400mAh Lithium Polymer Battery
Weight：350 ±10gr
Connectivity: Bluetooth 4.2 BLE
APP Compatibility： iOS 9.0 & Above
Android 4.4 & Above
Voltage：Micro USB 5V / 500mA
Battery life for full charge：30~90 Days
Warranty：One Year from Ship-out Date (12 Months)
Country of origin：Taiwan
Package Contents：
． DrinKup Smart Bottle
． Micro USB Cable
． User Manual

BALTEK CO., LIMITED
31/ F Chinachem Century Tower, 178 Gloucester Rd., Wanchai, Hong Kong.
We retain the right in any form of modification and definition all the specification list above.

https://manual-hub.com

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>