AnniuSmart LDB-D11 Smart Wireless Doorbell User Manual

AnniuSmart LDB-D11 Smart Wireless Doorbell User Manual

Thank you for purchasing this product.To ensure properly use and trouble-free operation,please read this manual carefully and store it in a safe place for future reference.

PACKAGE CONTENTS

PRODUCT OVERVIEW

OPERATING INSTRUCTIONS

1.Pairing Method

1. Plug the receiver into the power socket.
2. Press and hold + button on the receiver for 3 seconds to enter pairing mode.The Receiver Light Indicator will blink.
3. Press the transmitter Push Button and the receiver will chime”ding dong “to indicate the pairing is complete.

Note:

1. Press any button on the receiver or wait for 60 seconds to exit the pairing mode.

2. Switching Melodies

Press,._ and ~1 buttons to switch among all the 56 melodies in sequence.

3. Adjusting Volume

Press+ button to increase the volume and – button to decrease the volume.

INSTALLATION

1. Transmitter battery installation
   The battery is pre-installed in the transmitter.Insert the key into the allotted slot and twistthe key clockwise to open. Peel off the insulating film on the button cell then close the cover.

2. Transmitter installation l)Adhesive tape:apply the double-sided adhesive tape on the back of the transmitter.Remove the outer side of the tape and attach the transmitter in the desired location on the wall. 2)Screws and anchors:there are screw locator knockouts on the back of the transmitter,punch these out to allow the screws to pass through and fix the transmitter with the anchors in the desired location on the wall.
   Notes: l)Please do not place this transmitter in areas close to metals. 2)The working distance varies with different blockage in the surrounding environments.

FEATURES

1. Melody Feature
   Built with 56 high quality melodies for your choices. Maximum sound pressure level up to 115dB.

2. Memory Feature
   The previously set volume level and melody will be remembered when you power on the device again.

3. Dust-proof and Waterproof Feature
   The transmitter is IP66 dust-proof and Water proof, fit for various outdoor environments.

4. Reliable Feature
   Custom encoded software communication method ensures better privacy and no interference from other devices

TROUBLE SHOOTING

If the unit has a problem, try to follow the instructions below to solve it.

TECHNICAL SPECI Fl CATIONS

• Receiver working voltage: AC 110-260v.
• Receiver AC Power Consumption: <0.25W (stand by mode).
• Working Frequency: 433.92MHz
• Transmitter Battery Type: CR2032 3V Lithium button cell
• Operating temperature: 14~122 °F (-10~50°()

WARRANTY INFORMATION

Please kindly contact us if you are not pleased with our products, we will offer you a satisfied solution within 24 hours. For instance, if there is any defect or omission, we will
send you the replacement. Here is our e-mail address:

supportringup@l63.com
For better help you, please contact us with following
information,
Your name:
Order number:
E-mail: ____ _

Ring Up

Greetings Thanks for your
support! Here are two tips for you!

Ti ps1 :First Use

Remove the battery insulating film before use

Tip 2:Transmitter invalid

Check the transmitter and receiver to verify that they are paired
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without striction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>