LiftMaster CAPXLV2 Smart Video Intercom-L Instruction Manual
- June 13, 2024
- LiftMaster
Table of Contents
**LiftMaster CAPXLV2 Smart Video Intercom-L Instruction Manual
**
INSTALLATION MANUAL ADDENDUM
CAPXLV2 – SMART VIDEO INTERCOM-L
Here is a list of changes that supersede the information provided in the installation manual.
-
We recommend connecting no more than 4 OSDP readers to the OSDP port for the best performance.
-
We are working to optimize the product to support up to 8 OSDP readers in a future release.
-
We are adding 8 diodes and 8 MOVs to protect the 8 relays on
CAPXLV2. We are also adding 2 pack-in resistors in his box. -
To provide extra protection to CAPXLV2, we recommend using a cover cap on the intercom lock hole.
-
The cover cap is provided in the box.
-
K41-0398-000 will replace CAPXLCAM as the new camera service kit for CAPXLV2.
-
For UL installations, Supply Voltage 2 (POE) is 42 – 55 Vdc, 60 W max 802.3bt Type 3 four pair compatible max.
-
WiFi is supplemental for UL installations.
-
CAPXLV2 has an operating humidity range from 20% to 90% RH
2023, The Chamberlain Group, LLC All Rights Reserved 114-5928-000
- Access Control Unit Endurance: Level 2. This requirement supersedes the Access Control Unit Endurance: Level 4 stated in the installation manual.
FCC and ISED caution statements:
FCC Caution：
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or operating in conjunction with any other antenna or transmitter.
