SAMSUNG HW-B650 3.1ch Soundbar with Wireless Subwoofer User Manual

HW-B650 3.1ch Soundbar with Wireless Subwoofer

Product Information

The HW-B650 is a soundbar manufactured by Samsung. It is
designed to enhance your audio experience while watching movies, TV
shows, or listening to music. With its sleek design and advanced
features, this soundbar offers powerful sound and convenient
connectivity options.

Safety Information

It is important to follow the safety precautions mentioned in
the user manual to ensure safe usage of the product. The soundbar
should not be opened or tampered with, as it contains high voltage
components. Any servicing or repairs should be done by qualified
service personnel.

Precautions

Here are some precautions to keep in mind while using the
HW-B650 soundbar:

1. During thunderstorms, disconnect the AC plug from the wall
   outlet to avoid damage caused by voltage peaks.

2. Avoid exposing the unit to direct sunlight or other heat
   sources to prevent overheating and malfunctions.

3. Properly dispose of the battery used with this product as it
   contains harmful chemicals. Do not short circuit, disassemble, or
   overheat the battery.

Contents

The package includes the following components:

• Soundbar
• Remote Control
• AAA Batteries (2)
• Subwoofer (Sold Separately)
• HDMI Cable (for wired connection)
• Optical Cable (for wired connection)

Product Usage Instructions

Checking the Components

Before using the HW-B650 soundbar, ensure that all the
components listed in the user manual are present. Refer to the
manual for detailed instructions on identifying and checking each
component.

Using the Remote Control

To use the remote control, follow these steps:

1. Insert AAA batteries into the remote control.

2. Refer to the user manual for a detailed explanation of the
   remote control buttons and their functions.

3. Adjust the soundbar volume using the TV remote control by
   following the instructions provided.

Connecting the Soundbar

Follow these steps to connect the soundbar:

1. Connect the soundbar to an electrical power source.

2. If available, connect the soundbar to a subwoofer for enhanced
   bass.

3. If desired, connect an SWA-9100S (Sold Separately) to your
   soundbar for a wireless surround sound experience.

Using a Wired Connection to the TV

There are two methods for connecting the soundbar to the TV
using a wired connection:

1. Method 1: Connect a TV using an HDMI Cable. Refer to the user
   manual for detailed instructions.

2. Method 2: Connect using an Optical Cable. Follow the
   instructions provided in the user manual for proper setup.

Using a Wireless Connection to the TV

The soundbar also supports wireless connectivity to the TV.
Refer to the user manual for detailed instructions on how to set up
a wireless connection between the soundbar and your TV.

FULL MANUAL
HW-B650
Imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register

SAFETY INFORMATION

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that this product has included important literature concerning operation and maintenance.
Class II product : This symbol indicates that it does not require a safety connection to electrical earth (ground). If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION · TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. · This apparatus shall always be connected to a AC outlet with a protective grounding connection. · To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. · Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus. · To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

ENG – 2

PRECAUTIONS
1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

ENG – 3

CONTENTS

01 Checking the Components

6

02 Product Overview

7

Front Panel / Top Panel of the Soundbar Bottom Panel of the Soundbar
03 Using the Remote Control

————————- 7 ————————- 8
9

Inserting Batteries before using the Remote Control (AAA batteries X 2) ————————- 9

How to Use the Remote Control Using the Hidden Buttons (Buttons with more than one function) Output specifications for the different sound effect modes

————————- 9 ————————- 13 ————————- 13

Adjusting the Soundbar volume with a TV remote control

————————- 14

04 Connecting the Soundbar

15

Connecting Electrical Power Connecting the Soundbar to the Subwoofer Connecting an SWA-9100S (Sold Separately) to your Soundbar
05 Using a wired connection to the TV

————————- 15 ————————- 16 ————————- 19
21

Method 1. Connecting a TV using an HDMI Cable Method 2. Connecting using an Optical Cable
06 Using a wireless connection to the TV

————————- 21 ————————- 23
24

Connecting a TV via Bluetooth

————————- 24

ENG – 4

07 Connecting an External Device
Method 1. Connecting using an HDMI Cable Method 2. Connecting using an Optical Cable
08 Connecting a USB Storage Device 09 Connecting a Mobile Device
Connecting via Bluetooth
10 Installing the Wall Mount
Installation Precautions Wallmount Components
11 Software Update
How to check the Firmware version Update Procedure If UPDATE is not displayed
12 Troubleshooting 13 Licence 14 Open Source Licence Notice 15 Important Notes About Service 16 Specifications and Guide
Specifications
ENG – 5

26
————————- 26 ————————- 27
28
29
————————- 29
33
————————- 33 ————————- 33
35
————————- 35 ————————- 36 ————————- 36
37
39
40
40
41
————————- 41

01 CHECKING THE COMPONENTS

SOUND MODE

CH LEVEL

WOOFER
TONE CONTROL

Soundbar Main Unit

Subwoofer

Remote Control / Batteries

x 2
Power Cord (Subwoofer, Soundbar)

AC/DC Adapter (Soundbar)

HDMI Cable

Wall Mount Guide

x 2 Holder-Screw

x 2 (M4 x L10)
Screw

x 2 Bracket-Wall Mount

· For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)
· To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care.
· Depending on the region, the appearance of the AC plug may differ from the plug displayed above, or it may be supplied integrated with the AC/DC adapter.
· The appearance of the accessories may differ slightly from the illustrations above. · Design and specifications are subject to change without prior notice.

ENG – 6

02 PRODUCT OVERVIEW
Front Panel / Top Panel of the Soundbar
Top Panel

Display Displays the product’s status and current mode.

(Power) Button Turns the power on and off.
· Auto Power Down Function
The unit turns off automatically in the following situations: ­ In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes.

(Volume) Button
Adjusts the volume.
· When adjusted, the volume level appears on the Soundbar’s front display.

(Source) Button Selects the source input mode.

Input mode

Display

Optical Digital input

ARC (HDMI OUT) input

HDMI input

D.IN D.IN TV ARC (Auto conversion)
HDMI

BLUETOOTH mode

BT

USB mode

USB

· To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and hold the (Source) button for more than 5 seconds.

· When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. · When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. · If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio
Setup menu of your TV. Refer to the owner’s manual supplied with your TV.

ENG – 7

Bottom Panel of the Soundbar

HDMI

USB (5V 0.5A)

HDMI TO TV (ARC)

DC 24V

DIGITAL AUDIO IN (OPTICAL)

USB (5V 0.5A) DC 24V

HDMI
HDMI TO TV (ARC)
DIGITAL AUDIO IN (OPTICAL)

USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar.
DC 24V (Power Supply In) Connect the AC/DC power adapter.
HDMI
Inputs digital video and audio signals simultaneously using an HDMI cable.
Connect to the HDMI output of an external device.
HDMI TO TV (ARC) Connect to the HDMI (ARC) port on a TV.
DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.
· When disconnecting the power cable of the AC/DC power adapter from a wall outlet, pull the plug. Do not pull the cable.
· Do not connect this unit or other components to an AC outlet until all connections between components are complete.

ENG – 8

03 USING THE REMOTE CONTROL

Inserting Batteries before using the Remote Control (AAA batteries X 2)
Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the back cover back into position.
How to Use the Remote Control

SOUND MODE

CH LEVEL

WOOFER
TONE CONTROL

Turns the Soundbar on and off.

Power

Press to select a source connected to the Soundbar.

Source Mute Volume

Press the (Mute) button to mute the sound. Press it again to unmute the sound.

SOUMNODDE

WOOFER

TCOONNET

SOUMNODDE

WOOFER T

CH LEVEL

CH LEVEL

Push the button up or down to adjust the

volume.

· Mute Press the Volume button in to mute the

sound. Press it in again to unmute the sound.

ENG – 9

By pressing the button, you can adjust the volume of the each speaker.

CH LEVEL

· Press the button to select CENTER LEVEL and then adjust the volume between -6~+6

CH LEVEL

by using the Up/Down buttons. · If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is

supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/

Down buttons.

By pressing the button, you can set the audio function. The desired settings can be

adjusted using the Up/Down buttons.

AUDIO SYNC NIGHT MODE ON/OFF VOICE ENHANCE ON/OFF Sound Control
­ AUDIO SYNC

If the video on the TV and audio from the Soundbar are not synchronised, press the

(Sound Control) button to select AUDIO SYNC and then set the audio delay

between 0~300milliseconds by using the Up/Down buttons. (Not available in “USB”

or “BT” mode.)

­ NIGHT MODE ON/OFF

This mode is optimized for nighttime viewing with the settings adjusted to bring the

volume down but keep the dialog clear.

­ VOICE ENHANCE ON/OFF

This mode is makes it easier to hear spoken dialog in movies and TV.

· The NIGHT MODE, and VOICE ENHANCE audio function can be turned ON/OFF by

using the Up/Down buttons.

· Press and hold the (Sound Control) button for about 5 seconds to adjust the sound

for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are

selectable using the Left/Right buttons and each can be adjusted to a setting between

-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.)

Switch the Soundbar to Bluetooth pairing mode.

Press the PAIR button and wait for the “BT PAIRING” screen to connect to a new

Bluetooth device. Bluetooth

PAIR

You can also play or pause music by pressing the button.

Play / Pause

ENG – 10

Press the indicated areas to select Up/Down/Left/Right.

Up/Down/ Left/Right

Press Up/Down/Left/Right on the button to select or set functions. · Repeat
To use the Repeat function in “USB” mode, press the Up button. · Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file. · ID SET Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless rear speakers).

Press the button to display information about the current function. (See page 7.)

Info

ENG – 11

SOUND

By pressing the button, you can select the desired sound mode.

MODE

SURROUND SOUND BASS BOOST GAME ADAPTIVE DTS VIRTUAL:X

STANDARD SOUND MODE ­ SURROUND SOUND

Provides a wider sound field than standard.

­ BASS BOOST

Sound field mode with emphasis on bass sound.

­ GAME

Provides stereoscopic sound to immerse you in the action while gaming.

­ ADAPTIVE

Analyzes the content in real time and automatically provides an optimal sound field based on the characteristics of the content.

­ DTS VIRTUAL:X

Immersive 3D sound from any content.

­ STANDARD

Outputs the original sound.

· DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the

SOUND MODE button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is

reduced. (The sound may be distorted.)

· Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection

request from a previously connected TV or Bluetooth device. The setting is On by

default.

­ Press and hold the SOUND MODE button for more than 5 seconds to turn off the

Bluetooth Power function.

WOOFER
WOOFER

SOUMNODDE

WOOFER

TCOONNET

SOUMNODDE

WOOFER

TCOONNET

(BASS) LEVEL

CH LEVEL

CH LEVEL

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to

+6. To set the woofer (bass) volume level to 0 (Default), press the button.

TONE

By pressing the button, you can adjust the volume of the treble or bass sound.

CONTROL

· Press the button to select TREBLE or BASS and then adjust the volume between -6~+6

TONE

by using the Up/Down buttons.

CONTROL

ENG – 12

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button

Remote Control Button

Function

WOOFER (Up)

TV remote control On/Off (Standby)

Left

TV Auto connect On/Off (BT Ready)

Up

ID SET

(Sound Control)

7 Band EQ

SOUND MODE

DRC ON/OFF (Standby) Bluetooth Power

PAIR

Bluetooth Multi-connection On/Off (Standby)

Reference page
page 14 page 25 page 11 page 10 page 12 page 12
page 32

Output specifications for the different sound effect modes

Effect

Input

SURROUND SOUND
BASS BOOST

SOUND MODE
SOUND MODE

GAME ADAPTIVE

DTS VIRTUAL:X

STANDARD

2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch

Output

Without Wireless Rear Speaker Kit

With Wireless Rear Speaker Kit

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

3.1 ch

5.1 ch

2.1 ch

2.1 ch

3.1 ch

5.1 ch

· The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchased the Soundbar from.

ENG – 13

Adjusting the Soundbar volume with a TV remote control
Adjust the Soundbar volume using the TV’s remote control.

· This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported.
· Set the TV speaker to External Speaker to use this function. · Manufacturers supporting this function:
Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order: “OFF-TV REMOTE” (Default mode), “SAMSUNG-TV REMOTE”, “ALL-TV REMOTE”.

Remote Control Button

SOUMNODDE

WOOFER

5 Sec
TON CO

Display (Default mode)
OFF-TV REMOTE

Status Disable the TV remote control.

SOUMNODDE

WOOFER

5 Sec
TON CO

SAMSUNG-TV REMOTE

Enable a Samsung TV’s IR remote control.

SOUMNODDE

WOOFER

5 Sec
TON CO

ALL-TV REMOTE

Enable a third-party TV’s IR remote control.

ENG – 14

04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order:
1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Soundbar. 3. Connect the power cord to a wall socket. See the illustrations below. · For more information about the required electrical power and power consumption, refer to the
label attached to the product. (Label: Bottom of the Soundbar Main Unit)

POWER

Power Cord

Rear of Subwoofer

Connecting Electrical Power

DC 24V
USB (5V 0.5A) DC 24V
Bottom of the Soundbar Main Unit

Power Cord
Connecting Electrical Power
AC/DC Adapter

· Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

ENG – 15

Connecting the Soundbar to the Subwoofer
When the subwoofer is connected, you can enjoy rich bass sound.

Automatic connection between the Subwoofer and the Soundbar
When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar.
· When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
LED Indicator Lights on the Rear of Subwoofer

LED Blue
Red

Status On
Blinking
On

Description Successfully connected (normal operation)
Recovering the connection
Standby (with the Soundbar main unit turned off)
Connection failed

Resolution
–
Check if the power cable attached to the main Soundbar unit is connected properly or wait about 5 minutes. If blinking persists, try manually connecting the subwoofer. See page 17. Check if the power cable attached to the main Soundbar unit is connected properly. Connect again. See the instructions for manual connection on page 17.

Red and blue

Blinking Malfunction

See the contact information for the Samsung Service Centre in this manual.

ENG – 16

Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below:
· Check whether the power cables for the Soundbar and subwoofer are connected properly. · Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
· The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
5 Sec

Rear of Subwoofer
2. Press and hold the Up button on the remote control for at least 5 seconds. · The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. · The Soundbar will automatically power on when ID SET is complete.

PAIR

5 Sec

SAMSUNG logo is on the top

ID SET

SOUNDE
3. Check if the LINK LED is solid blue (connection complete).

Blue is On

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer.

ENG – 17

NOTES · Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. · Before moving or installing this product, be sure to turn off the power and disconnect the power cord. · If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. · If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. · The maximum transmission distance of the main unit’s wireless signal is about 10 m, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all because the wireless signal cannot penetrate metal.
PRECAUTIONS · Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water and moisture. · For optimal listening performance, make sure that the area around the wireless subwoofer and the Wireless Receiver Module (sold separately) is clear of any obstructions.
ENG – 18

Connecting an SWA-9100S (Sold Separately) to your Soundbar
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S, sold separately) to your Soundbar.
1. Connect the Wireless Receiver Module to 2 Surround Speakers. ­ When connecting the speaker cable, connect the core wire to the speaker.

SURROUND-RIGHT

SURROUND-RIGHT

­ The speaker cables are colour coded.

SURROUND-LEFT
SURROUND-LEFT

LR
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
ID SET
LR
SURROUND SPEAKERS OUT
POWER

SURROUND-RIGHT
SURROUND-RIGHT

2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. · The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-9100S user manual.

LR
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
ID SET

5 Sec ID SET

POWER
POWER

STANDBY LINK

LINK

Blue blinking

ENG – 19

3. Press and hold the Up button on the remote control for at least 5 seconds. · The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. · The Soundbar will automatically power on when ID SET is complete.

PAIR

5 Sec

SAMSUNG logo is on the top

ID SET

SOUNDE
CAUTION · If your Soundbar was playing music when it connects to the SWA- 9100S, you may hear some
stuttering from the woofer as the connection finalises. 4. Check if the LINK LED is solid blue (connection complete).

STANDBY LINK

LINK

Blue is On

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module.

5. If the SWA-9100S is not connected, repeat the procedure from Step 2.

ENG – 20

05 USING A WIRED CONNECTION TO THE TV

Hear TV sound from your Soundbar through wired or wireless connections. · When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. ­ This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. ­ This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.
Method 1. Connecting a TV using an HDMI Cable

CAUTION
· When both the HDMI cable and optical cable are connected, the HDMI signal is received first. · To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals
marked ARC. Otherwise, the TV sound may not be output. · The recommended cable is High Speed HDMI Cable with Ethernet.

Connect to the HDMI IN (ARC) or (eARC) port of your TV.
HDMI IN (ARC)

HDMI Cable

Bottom of the Soundbar
HDMI TO TV (ARC)

Connect to the HDMI TO TV (ARC) port of the Soundbar main unit.

Top of the Soundbar

TV ARC
1. With the Soundbar and TV turned on, connect the HDMI cable as shown in the figure. 2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
ENG – 21

· If TV sound is inaudible, press the (Source) button on the remote control or on the top of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.
· If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port.
· Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. NOTES
· HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
· If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port. · We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm. · This function is not available if the HDMI cable does not support ARC. · When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)
ENG – 22

Method 2. Connecting using an Optical Cable
Pre-connection Checklist · When both the HDMI cable and optical cable are connected, the HDMI signal is received first. · When you use an optical cable and the terminals have covers, be sure to remove the covers.

Optical Cable (not supplied)

OPTICAL OUT

Top of the Soundbar

Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)

D.IN
1. Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable (not supplied).
2. Press the (Source) button on the top panel or remote control, and then select the “D.IN” mode.

ENG – 23

06 USING A WIRELESS CONNECTION TO THE TV
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. · Only one TV can be connected at a time.
PAIR
OR

The initial connection

1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the (Source) button on the top panel and then select “BT”. “BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record.

b. When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.) 3. Select “[AV] Soundbar B6-Series” from the list on TV’s screen.
An available Soundbar is indicated with “Needs pairing” or “Paired” on the TV’s Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection. · When the TV is connected, [TV Name] “BT” appears on the Soundbar’s front display. 4. You can now hear TV sound from the Soundbar.

If the device fails to connect · If a previously connected Soundbar listing (e.g. “[AV] Soundbar B6-Series”) appears in the list, delete it. · Then repeat steps 1 through 3.

NOTE · After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect.

ENG – 24

Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”.
· Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)
· To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status. (Toggle On Off)
What is the difference between BT READY and BT PAIRING? · BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. · BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)
NOTES · If asked for a PIN code when connecting a Bluetooth device, enter

07 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar.

Method 1. Connecting using an HDMI Cable

Top of the Soundbar

HDMI

External Device

HDMI OUT

HDMI Cable

HDMI
HDMI TO TV (ARC)

HDMI IN (ARC)

HDMI Cable

Bottom of the Soundbar

1. Connect an HDMI cable from the HDMI port on the bottom of the Soundbar to the HDMI OUT port on your digital device.
2. Connect an HDMI cable from the HDMI TO TV (ARC) port on the bottom of the Soundbar to the HDMI IN port on your TV.
3. Press the (Source) button on the top panel or on the remote control, and then select “HDMI”. 4. “HDMI” mode is displayed on the Soundbar display panel and sound plays.

ENG – 26

Method 2. Connecting using an Optical Cable

BD / DVD player / Set-top box / Game console

Optical Cable (not supplied)

OPTICAL OUT

Top of the Soundbar

Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)

D.IN
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable (not supplied).
2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.

ENG – 27

08 CONNECTING A USB STORAGE DEVICE
You can play music files located on USB storage devices through the Soundbar.

USB (5V 0.5A) DC 24V

USB port
HDMI HDMI TO TV
(ARC) DIGITAL AUDIO IN (OPTICAL)

USB (5V 0.5A)

USB

1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
· The Soundbar automatically turns off (Auto Power Down) if no USB device has been connected for more than 20 minutes.
File Format Type Compatibility list

Extension .mp3
.wma .aac
.wav .flac .aiff *.ogg

Codec MPEG 1 Layer2 MPEG 1 Layer3 MPEG 2 Layer3 MPEG 2.5 Layer3 Wave_Format_MSAudio1 Wave_Format_MSAudio2 AAC
AAC-LC
HE-AAC
FLAC AIFF OGG 1.1.0

Sampling Rate 16kHz ~ 48kHz 16kHz ~ 48kHz 16kHz ~ 48kHz 16kHz ~ 48kHz 16kHz ~ 48kHz 16kHz ~ 48kHz 16kHz ~ 96kHz
16kHz ~ 96kHz
24kHz ~ 96kHz
16kHz ~ 48kHz 32kHz ~ 192kHz 32kHz ~ 192kHz 16kHz ~ 48kHz

Bit Rate 80kbps~320kbps 80kbps~320kbps 80kbps~320kbps 80kbps~320kbps 56kbps~128kbps 56kbps~128kbps 48kbps~320kbps 128kbps~192kbps 5.1ch 320kbps 48kbps~64kbps 5.1ch 160kbps up to 3000kbps 162kbps ~ 8,100kbps 1,024kbps ~ 9,216kbps 50kbps~500kbps

· If there are too many folders (about 200) and files (about 2000) stored on the USB device, it may take the Soundbar some time to access and play files.
· The Soundbar only supports USB devices with FAT16 (~2GB), FAT32 (~2TB) or NTFS (~2TB) file systems.

ENG – 28

09 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
· The connection is limited to one TV or two Bluetooth devices at the same time.

Bluetooth device

PAIR
OR

The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the (Source) button on the top panel and then select “BT”. “BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record.

b. When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. On your device, select “[AV] Samsung Soundbar B6-Series” from the list that appears. · When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] “BT” appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.

If the device fails to connect
· If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar B6-Series”) appears in the list, delete it.
· Then repeat steps 1 and 2.

NOTE · After you have connected the Soundbar to your mobile device the first time, use the “BT READY” mode to reconnect.

ENG – 29

What is the difference between BT READY and BT PAIRING? · BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. · BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)
NOTES · If asked for a PIN code when connecting a Bluetooth device, enter

Disconnecting the Bluetooth device from a Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual.
· The Soundbar will be disconnected. · When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“BT DISCONNECTED” on the front display.
Disconnecting the Soundbar from the Bluetooth device
Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
· Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
· When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display.
NOTES · In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 m. · The Soundbar automatically turns off after 20 minutes in the Ready state.
More About Bluetooth Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect easily with each other using a short wireless connection.
· A Bluetooth device may cause noise or malfunction, depending on usage, if: ­ A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. ­ It is subject to electrical variation from obstructions caused by a wall, corner, or office partition. ­ It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.
· Pair the Soundbar with the Bluetooth device while they are close together. · The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost. · In poor reception areas, the Bluetooth connection may not work properly. · The Bluetooth connection only works when it is close to the unit. The connection will be
automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors. · This wireless device may cause electric interference during its operation.
ENG – 31

Bluetooth Multi connection
The Soundbar can be connected to 2 Bluetooth devices at the same time.

Bluetooth device A

Bluetooth device B

1. Connect the Soundbar to up to two Bluetooth devices. (See page 29) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. If music is played from the Bluetooth device “B” while playing from the device “A”, the music is
started playing on the device “B” and automatically being stopped/paused playback on the device “A”. 4. In versions prior to AVRCP V1.4, the switching time of the device playing music may be delayed.

Bluetooth Multi Pairing
How to pair multiple devices to the Soundbar 1. Turn on the Soundbar. 2. Only in “BT” mode, press and hold the (Source) button on the top of the Soundbar for more than 5 seconds for the Soundbar to go into “BT PAIRING” mode, then on the Bluetooth device side, switch Bluetooth on, and select the Soundbar from the list of available devices, the Soundbar will automatically connect to the Bluetooth device. 3. A 2nd Bluetooth device can be paired and connected to the Soundbar using the same method. If you attempt to connect a 3rd device, a connected device that is not playing audio will lose its Bluetooth connection, but will still be paired with the Soundbar. 4. Using the same method, you can pair up to 8 Bluetooth devices, but only the last 2 will stay connected to the Soundbar at the same time.
NOTES · Only 1 Samsung TV, or 2 Bluetooth devices can be connected to the Soundbar at one time. · The Soundbar will be disconnected from Bluetooth devices when it receives a connection request from a Samsung TV. · The default of Soundbar is “ON-BT MULTI CONNECTION”, but for restoration to non-multi connection mode from another mode, press and hold the PAIR button on the remote control for more than 5 seconds in standby mode, until “OFF-BT MULTI CONNECTION” appears in the display.

ENG – 32

10 INSTALLING THE Wallmount Components WALL MOUNT

Installation Precautions
· Install on a vertical wall only. · Do not install in a place with high
temperature or humidity. · Verify whether the wall is strong enough to
support the product’s weight. If not, reinforce the wall or choose another installation point. · Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs. · Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.
­ Diameter: M5 ­ Length: 35 mm or longer recommended. · Connect cables from the unit to external devices before you install the Soundbar on the wall. · Make sure the unit is turned off and unplugged from the power source before you install it. Otherwise, it may cause an electric shock.

Wall Mount Guide

x 2 Holder-Screw

x 2 (M4 x L10)
Screw
x 2

Bracket-Wall Mount

1. Place the Wall Mount Guide against the wall surface. · The Wall Mount Guide must be level. · If your TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.

5 cm or more

ENG – 33

2. Align the Wall Mount Guide’s Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape. · If you are not mounting below a TV, place the Centre Line in the centre of the installation area.

5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.
(Not supplied)

6. Install the 2 Bracket-Wall Mounts in the correct orientation on the bottom of the Soundbar using 2 Screws.
Centre Line 3. Push a pen tip or sharpened pencil tip
through the centre of the A-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in the wall at each marking. · If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors into the holes before you insert the support screws. If you use anchors, make sure the holes you drill are large enough for the anchors you use.

· When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar
Right end of Soundbar

ENG – 34

7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the

11

Bracket-Wall Mounts on the Holder-Screws

on the wall.

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar’s system firmware in the future.

USB port

USB (5V 0.5A) DC 24V

HDMI
HDMI TO TV (ARC)
DIGITAL AUDIO IN (OPTICAL)

8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. · Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder- Screws.

USB (5V 0.5A)
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.comSupport. Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary.

How to check the Firmware version
1. Turn off the Soundbar. 2. Press and hold the (Sound Control)
button for about 5 seconds on the remote control. 3. Each version appears in the following order on the Soundbar display. (Software version HDMI Tx Rx ) · Tx : Wireless Tx module in the Soundbar. · Rx : Wireless Rx module in the Subwoofer. · R2 VERSION DISPLAY
­ No connect rear R2–­ Connected rear R2xxx

ENG – 35

Update Procedure

If UPDATE is not displayed

Important: The update function erases all user settings. We recommend you write down your settings so that you can easily reset them after the update. Note that updating the firmware resets the subwoofer connection too.
1. Connect a USB thumb drive to the USB port on your computer. Important: Make sure there are no music files on the USB thumb drive. This may cause the firmware update to fail.
2. Go to (samsung.com) select Enter Model Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file.
3. Save the downloaded software to a USB stick and select “Extract Here” to unzip the folder.
4. Turn off the Soundbar and connect the USB stick containing the software update to the USB port.
5. Turn on the Soundbar and change the source to “USB” mode. Within 3 minutes, “UPDATE” is displayed and the update begins. When the update is complete, the Soundbar turns off and then turns on automatically.
6. Press the (Volume) button on the top panel for 5 seconds. “INIT” appears on the display and then the Soundbar turns off. The update is complete. · This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware again.
7. Restore your settings on the Soundbar.

1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port.
2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar.
NOTES · The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. · Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update. · After the update is completed, the user setup in the Soundbar is Initialised so you can reset your settings. We recommend you write down your settings so that you can easily reset them after the update. Note that updating firmware resets the subwoofer connection too. If the connection to the subwoofer is not re- established automatically after the update, refer to page 16. If the software update fails, check if the USB stick is defective. · Mac OS users should use MS-DOS (FAT) as the USB format. · Updating via USB may not be available, depending on the USB storage device manufacturer.

ENG – 36

12 TROUBLESHOOTING

Before seeking assistance, check the following.
Soundbar does not turn on.
; Check whether the power cord of the Soundbar is correctly inserted into the outlet.
Soundbar works erratically.
; After removing the power cord, insert it again.
; Power cycle the external device and try again.
; If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power. (See page 7.)
If the remote control does not work.
; Point the remote directly at the Soundbar. ; Replace the batteries with new ones.
Soundbar does not output any sound.
; The volume of the Soundbar is too low or muted. Adjust the volume.
; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
; For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Select Soundbar)
; The cable connection to the Soundbar may not be loose. Remove the cable and connect again.
; Remove the power cord completely, reconnect, and turn the power on.
; Reset the product and try again. (See page 36.)

Subwoofer does not output any sound.
; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking in blue or turned red. (See page 17.)
; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer. Move devices to an area away from obstacles.
; Other devices sending radio frequency signals in proximity may interrupt the connection. Keep your speaker away from such devices.
; Remove and reconnect the power plug.
The Subwoofer volume is too low.
; The original volume of the content you are playing may be low. Try adjusting the Subwoofer level. (See page 12.)
; Bring the Subwoofer speaker closer to you.
If the TV is not connected via HDMI TO TV (ARC).
; Check whether the HDMI cable is correctly connected to the ARC terminal. (See page 21.)
; Connection may not be possible due to the connected external device (set-top box, game machine, etc.). Directly connect the Soundbar.
; HDMI-CEC may not be activated on the TV. Turn on the CEC on the TV menu. (Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Connection External Device Manager Anynet+ (HDMI-CEC) ON)

ENG – 37

There is no sound in when connecting to the TV in HDMI TO TV (ARC) mode.
; Your device is unable to play the input signal. Change the TV’s audio output to PCM or Dolby Digital. (For a Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Sound Expert Settings Digital Output Audio Format)
Soundbar does not connect via Bluetooth.
; When connecting a new device, switch to “BT PAIRING” for connection. (Press the PAIR button on the remote control or press the (Source) button on the body for at least 5 seconds.)
; If the Soundbar is connected to another device, disconnect that device first to switch the device.
; Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List)
; The automatic TV connection may be disabled. While the Soundbar is in “BT READY”, press and hold the Left button on the Soundbar remote control for 5 seconds to select ON-TV CONNECT. If you see OFF-TV CONNECT, press and hold Left button again for 5 seconds to switch the selection.
; Remove and reconnect the power plug, then try again.
; Reset the product and try again. (See page 36.)

Sound drops out when connected via Bluetooth.
; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out. Move the device closer to the Soundbar.
; If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, sound may drop out. Check the installation environment and conditions for use.
Bluetooth multi connection does not work.
; When the TV is connected to the soundbar, Bluetooth multi connection may not operate. Disconnect the Soundbar from the TV and try again.
; Check whether the Bluetooth Multi connection setting is turned on. (Refer to the “Soundbar does not connect via Bluetooth.” section.)
; Disconnect the device currently playing, pair with the device that you want to connect, and reconnect the previous device.
; If the sound is inaudible even after connecting properly, refer to the “Sound drops out when connected via Bluetooth.” section.
Soundbar does not turn on automatically with the TV.
; When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.

ENG – 38

13 LICENCE

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/ Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Digital Surround, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

[ENERGY STAR] ENERGY STAR qualified model only ­ Your Samsung product is ENERGY STAR
qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. ­ Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program.
ENERGY STAR qualified model only (Applicable to Thin Client models only) As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ­ The ENERGY STAR Program has been to
reduced greenhouse gas emissions and save energy through voluntary labeling. ­ Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. ­ The product can wake with a button press on the chassis from sleep mode.
ENERGY STAR qualified model only (The other models) ­ As an ENERGY STAR Partner, Samsung has
determined that this product or product models meets the ENERGY STAR guideline for energy efficiency.

ENG – 39

14 OPEN SOURCE . LICENCE NOTICE
To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)
15 IMPORTANT NOTES ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
ENG – 40

16 SPECIFICATIONS AND GUIDE

Specifications
Model Name USB Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range AMPLIFIER Rated Output power
Supported play formats
Subwoofer Name Weight Dimensions (W x H x D) AMPLIFIER Rated Output power

HW-B650 5V/0.5A
3.1 kg 1030.0 x 59.4 x 105.0 mm
+5°C to +35°C 10 % ~ 75 %
180W (30Wx6)
LPCM 2ch, Dolby AudioTM (supporting Dolby® Digital), DTS, DTS Virtual:X
PS-WB65D 5.1 kg
184.0 x 346.0 x 295.0 mm
250W

NOTES · Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. · Weight and dimensions are approximate.
· For India Only “This product is RoHS compliant”

ENG – 41

© 2022 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre.

Country / Area ` Asia Pacific
CHINA TAIWAN
HONG KONG
MACAU SINGAPORE AUSTRALIA NEW ZEALAND VIETNAM THAILAND MYANMAR CAMBODIA LAOS MALAYSIA
INDONESIA
PHILIPPINES
INDIA NEPAL BANGLADESH SRI LANKA

Samsung Service Centre
400-810-5858
0800-329-999 0809-00-5237 ( B2B / Dealer)
3698 4698 (All Product) 3698 4688 (B2B) 3698 4633 (eStore) 2121 9088 (Samsung pay)
0800 333
1800 7267864 | 1800-SAMSUNG
1300 362 603
0800 726 786
1800 588 889
1800-29-3232 (Toll free for all product)
+95-1-2399-888
1800-20-3232 (Toll free)
+856-214-17333
1800-88-9999 +603-7713 7420 (Overseas contact)
021-5699-7777 0800-112-8888 (All Product, Toll Free) 0800-112-7777 (All Product, Toll Free)
Dedicated Hotline for Mobile Phones: #GALAXY (just dial #425299) All Products : 1-800-10-7267864 [ PLDT – Toll Free ] 1-800-8-7267864 [ Globe – Toll Free ] 84222111 [ Landline ] 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free)
16600172667 (Toll Free for NTC Only) 9801572667 (Toll Free for Ncell users)
08000-300-300 (Toll free) 09612-300-300
011 SAMSUNG (011 7267864)

Web Site
www.samsung.com/cn/support www.samsung.com/tw/support
www.samsung.com/hk/support (Chinese) www.samsung.com/hk_en/support (English)
www.samsung.com/sg/support www.samsung.com/au/support www.samsung.com/nz/support www.samsung.com/vn/support www.samsung.com/th/support www.samsung.com/mm/support www.samsung.com/th/support www.samsung.com/my/support
www.samsung.com/id/support
www.samsung.com/ph/support
www.samsung.com/in/support www.samsung.com/in/support www.samsung.com/bd/support www.samsung.com/in/support

References

• Patents - DTS
• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Homepage | ENERGY STAR
• Product Help & Support | Samsung Australia
• Product Help & Support | Samsung Bangladesh
• 产品帮助与支持 | 三星电子 中国
• Product Help & Support | Samsung Hong Kong
• 產品支援 | 三星電子 香港
• Temukan Bantuan & Support Produk Samsung | Samsung Indonesia
• Product Help & Support | Samsung India
• ကုန်ပစ္စည်း အကူအညီနှင့် ပံ့ပိုးရေး | Samsung Myanmar
• Product Help & Support | Samsung Malaysia
• Samsung Product Helps & Online Support | Samsung New Zealand
• Product Help & Support | Samsung Philippines
• Product Help & Support - Get help, find answers | Samsung SG
• ความช่วยเหลือและการสนับสนุนผลิตภัณฑ์ซัมซุง | Samsung Thailand
• 產品協助與支援 | Samsung 台灣

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>