Bebe Stars 321 Baby Bouncer With Toys Bar User Manual

: June 13, 2024
: Bebe Stars

Table of Contents

WARNINGS
CARE AND MAINTENANCE
PARTS
ASSEMBLY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bebe Stars 321 Baby Bouncer With Toys Bar User Manual

WARNINGS

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY TO GUARANTEE YOUR CHILD’S SAFETY AT ALL TIMES. IMPORTANT! KEEP FOR FUTURE REFERENCE.

WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH AND CHILDREN

WARNINGS

WARNING: Never leave the child untended in the the baby bouncer.
WARNING: Do not use the baby bouncer once your child can sit unaided, is able to sit up on their own, can roll over or is able to stand up using their hands, knees and feet.
WARNING: This baby bouncer is not intended for prolonged periods of sleeping.
WARNING: It is dangerous to use the baby bouncer on an elevated surface, such as tables, chairs, etc.
WARNING: Always use the restraint system when the child is in the baby bouncer; adjust the length of the straps as necessary.
WARNING: Never use the toy bar to carry the baby bouncer.
WARNING: Age of permed use: from birth to 9kg (6 months).
WARNING: The baby bouncer does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
WARNING: Do not use the baby bouncer if any components are broken or missing.
WARNING: Do not use accessories or replacement parts other than those approved by the manufacturer.
WARNING: This product and all it’s components must be assembled by adults only.
WARNING: Do not use the baby bouncer for more than one child at a me.
WARNING: Never leave the baby bouncer on surfaces which are not perfectly level.
WARNING: Do not allow children to play unsupervised near the baby bouncer.
WARNING: To prevent the risk of fire, never place the baby bouncer near electrical appliances, gas cookers or other sources of intense heat.
WARNING: Make sure that the cover is always fitted correctly on the baby bouncer’sframe.
WARNING: Never use this baby bouncer to carry a child in motorised vehicles.
WARNING: Always check that all the componentsare fied and assembled correctly.
WARNING: Periodically check for worn parts, loose screws, worn or frayed fabrics and immediately replace any damaged parts.
WARNING: Do not place the baby bouncer with the child inside near windows or walls, where strings, curtains or other objects may be used by the child to climb out of the bouncer, with consequent risk of suffocaon and/or chocking.
WARNING: Do not place the baby bouncer near windows or walls, to prevent the child from affecng the stability of the bouncer, making it topple over.

CARE AND MAINTENANCE

FABRIC FACT SHEET

LINING: All new materials. Outer: 100% polyester Padding: 100% polyester padding.
BOOSTER CUSHION: All new materials. 100% polyester outer cover 100% polyester padding.
COVER: All new materials: 100% polyester.

This product requires periodic maintenance.
The cleaning and maintenance operaons must only be carried out by an adult.
Periodically inspect the baby bouncer to check for broken, torn or missing parts: if this is the case, do not use it.
Please refer to the care label for instrucons on cleaning the baby bouncer.
Hand wash in cold water
- Do not bleach
- Do not use a dryer
- Do not iron
- Do not dry clean
Check that the fabric and stching are in good condion each me you wash it.
Prolonged exposure to direct sunlight can cause the fabric to fade.

PARTS

Legs
Seat
Booster cushion
Removable toys
Toy bar

ASSEMBLY

The baby bouncer needs to be assembled before being used.

Rotate the legs outwards and connect them to the seat as seen in Pic. 1.

This operaon can only be performed by inserng the legs in a specific direcon. To avoid errors check that the metal pin scks out of the relave holes correctly (Pic. 2).

You will hear it click into place; try and pull it out to make sure it is fied correctly. Also make sure that the baby bouncer carrier handles are on the outside of the frame (Pic. 3).
The booster cushion C is ideal for use from birth and can be removed as required later on. To fasten it to the seat, place it on the seat and around the crotch strap as indicated in Pic. 4.

See also the “BOOSTER CUSHION” paragraph. Posion the headrest CC at the desired height, thread the trap through the slot on the bouncer and fasten in place using the velcro fastener as indicated in Pic. 5
Fasten the toy bar on the structure, slong it into the relave fixture. Make sure the toy bar is fied correctly (Pic. 6).
To fasten the toy D to the toy bar, thread the fabric strap through the slots on the top of the bar, paying
ATTENTION that the closure of the velcro is facing downwards. Check that the velcro fasteners are closed correctly **(Pic. 7).

USING THE SAFETY HARNESS**

Release the safety harness by pressing the centre buon on the buckle and at the same part extract the other part of the buckle by pressing the prongs together (Pic. 8).

The baby bouncer is now ready for your baby. When using it, remember to always check the straps are ght enough and in the right posion. The length of the harness straps can also be adjusted from behind the backrest.
Take hold of one end of the buckle and then pull the strap to the desired length as seen in **Pic. 9.

ADJUSTING THE FOOT-REST**

It is possible to adjust the foot-rest to two different posions: LOW POSITION: press the buons on the front fixtures whilst pushing the foot-rest downwards (Pic. 12).

You will hear it click into place when it is fied correctly. HIGH POSITION: repeat the operaon above in the opposite direcon. That is, press the buons whilst pushing the foot-rest upwards (Pic. 13).

Once again you will hear it click into place when fied correctly.
FIXED OR ROCKING MODE

The baby bouncer can also be used in rocking mode. Simply rotate the rear handle, in the middle of the legs, following the indicaons of the arrow (Pic. 14).

When you want to use the baby bouncer normally again, turn the handle in the opposite direcon (Pic. 15).

BOOSTER CUSHION
The baby bouncer comes with a shaped booster cushion.
Place the booster cushion C on the bouncing seat, threading the crotch strap around the booster cushion, as indicated in Pic. 4.
Posion the head rest CC at the desired height, thread the strap through the slot on the chair and fasten in place using the velcro fastener as indicated in Pic. 5. REMOVABLE COVERS
It is possible to remove the slip cover and the booster cushion to wash them.
Remove the booster cushion.
Remove the safety harness from the slots in the fabric and remove the slip cover from the front, starng from the foot rest (Pic. 16).

Open the velcro fastener underneath then slide the cover over the backrest. To refit the slip cover, proceed in the opposite order, paying aenon that the lower fabric cord is threaded through the backrest adjustment fixtures (Pic. 17).