Azden FMX-32A 3-Channel Portable Field Mixer Operating Manual

Azden FMX-32A 3-Channel Portable Field Mixer

Safety Instructions

• It is very important to read and understand this manual completely before use. Keep this manual for future reference.
• When connecting/disconnecting cables and/or changing the phantom power setting or input level settings, turn the input level control knobs to zero or power switch off.
• When the phantom DC48V power is not needed, make sure the phantom switch is in the off position.
• Before turning the phantom DC48V switch on, make sure your condenser microphone is designed to handle 48V DC or the microphone may be damaged. Check the microphone’s manual or with the manufacturer.
• Do not use other batteries than “AA” alkaline batteries. Do not mix fresh batteries with used ones.
• Remove the batteries if the mixer will not be used for a long period of time to prevent battery fluid leaks.

Front Control Panel

1. POWER INDICATOR: When the power switch (○12 )Is on, the LED will light in green. When the battery level becomes too low for proper operation, the LED will turn red. When this happens, replace the batteries with fresh “AA” alkaline batteries.

2. CHANNEL 1, 2 & 3 INPUT LEVEL CONTROLS: Each knob controls the input volume level of the microphone connected to the corresponding input ( 9○). Zero is the lowest (quietest) setting while 10 is the highest (loudest).

3. CHANNEL 1, 2 & 3 OUTPUT SELECTORS: Let you select the output of each channel between LEFT, CENTER, and RIGHT.

4. MASTER LEVEL CONTROL: This knob controls the overall volume level of all connected sources (microphone and/or line
   -level devices).

5. CHANNEL 1, 2 & 3 LIMITER SWITCHES: Each input channel has a switchable limiter. After setting the input volume level, turn this switch on. The limiter circuit will be activated and reduce the possibility of overload distortion from very loud sounds without affecting normal sound volume. If you prefer the overall sound quality of the mixer without the limiter circuit engaged, leave this switch off.

6. INPUT PEAK LEVEL INDICATOR: When the mixer detects signal overload and distortion, this LED will light in red. Lower the input level by turning the corresponding input level control (○2 ) counterclockwise.

7. CHANNEL LEFT & RIGHT OUTPUT LEVEL INDICATORS: These indicators will show the output volume level of the CH L and CH R outputs (○13 &○14 ). When the indicators show red, reduce the volume level by turning the input level control knobs ( 2○) or the master level control knob (○4 ).

8. BATTERY COMPARTMENT: Open the lid by lifting it while pushing the tab.
   Side Panels

9. CHANNEL 1, 2 & 3 XLER INPUTS: Connect the 3-pin XLR output of a microphone, wireless receiver, or line-level audio component to CH 1 and/or CH 2 and/or CH 3. Push the XLR connector into the input jack until it locks. To remove the XLR connector, press the “PUSH” tab while pulling the connector out.

10. INPUT LEVEL SELECTOR: The following 2 settings are available for each channel:
    MIC HI: maximum +4dBu (2kΩ) MIC LO: maximum -15dBu (2kΩ)

11. PHANTOM DC 48V SWITCH: Each channel has its own phantom DC 48V power setting. When using a dynamic microphone, make sure that the corresponding phantom DC 48V switch is in the OFF position. When using the condenser micro-phone that requires 48V DC external power, turn the corresponding phantom DC 48V switch ON. When you turn the phan-tom DC 48V switch ON or OFF, make sure to turn the volume level control knobs ( 2○) zero or turn the power switch ( 12○) OFF.

12. POWER SWITCH

13. CHANNEL LEFT

14. RIGHT XLR OUTPUTS: Connect a cable from these outputs to the MIC or LINE input of your camera or audio recorder. The outputs accept a standard 3-pin female XLR connector.

15. STEREO MIC OUTPUT: This mini-connector (3.5mm) output is designed for video cameras or audio recorders with mini-connector mic-level inputs. This output is stereo (dual-channel) and unbalanced. It is recommended to use a stereo-to-stereo mini cable (not included) to connect this output to the input of your video camera or audio recorder. Because the FMX-32a is equipped with low-impedance XLR inputs and a mini-connector output, users of cameras/audio recorders with mini-connector inputs can now use high-quality microphones with XLR outputs.

16. MONITOR PHONES OUTPUT JACK: A 1/4” (6.3mm) jack for headphones.

17. LEVEL VOLUME CONTROL: Controls the volume level of the monitor phone’s output (○16 ). Zero is the lowest and 10 is the highest setting.

18. EXTERNAL DC IN CONNECTOR: To power the mixer with external 12V DC power. An optional AC adaptor, part number BC -27, is available. For information, visit www.azdencorp.com

Specifications

• MAX OUTPUT LEVEL:
  • CH L & CH R: +20dBu (5kΩ)
  • UNBALANCED OUTPUT: -19dBu (2kΩ)
  • MONITOR OUTPUT: +1dBu (32Ω)
• FREQUENCY RESPONSE: 20 – 20,000Hz (+0/-0.5dB)
• NOISE LEVEL: -120dBu
• T.H.D.: Less than 0.005% (1kHz, +19dBu)
• PHANTOM POWER: 48V ±2V
• POWER SOURCE: 6 “AA” Alkaline batteries/DC 12V 200mA
• BATTERY DURATION: Up to 15 hours in continuous use
• DIMENSIONS: 170mmL x 120mmW x 53.5mmH / 6 11/16”L x 4 3/4”W x 2 3/16”H
• WEIGHT: 750 g / 26.45 oz (without batteries)

An optional canvas carrying case, part number FMX-32C, is available. Visit www.azdencorp.com for details.

LIMITED TWO-YEAR WARRANTY

Azden Corporation warrants, to the first purchaser, that the Azden brand product purchased is free from defects in material and workmanship. Azden’s sole obligation under this warranty shall be to provide, without charge, repair or replacement (at Azden’s sole discretion), within two years from the date of purchase. The cost to ship a failed product to and from Azden or to its dealer shall not be covered by this warranty. A dated receipt acts to establish the date of purchase and is all that is required for warranty service.

This warranty is the sole and exclusive express warranty given with respect to the product and all other warranties, expressed or implied, are hereby excluded. Neither Azden nor the dealer who sells this product is responsible for indirect, incidental, or consequential damages.

This warranty does not extend to any defect, malfunction, or failure caused by misuse, abuse, accident, Act of God, faulty hookup, unauthorized modification, connecting this product to equipment for which this product is not intended, or defective associated equipment. Please read your owner’s manual carefully.

1-12-17 Kamirenjaku Mitaka-shi Tokyo 181-8533 Japan

• Tel: +81(0)422-55-5115
• Fax: +81(0)422-55-0131
• E-mail: sales@azden.co.jp
• URL http://www.azden.co.jp

FREQUENTLY ASKED QUESTIONS

What is the Azden FMX-32A 3-Channel Portable Field Mixer?

The Azden FMX-32A 3-Channel Portable Field Mixer is a compact and high-quality audio mixer designed for field recording and audio production in various settings.

What are the key features of the FMX-32A Field Mixer?

The FMX-32A typically offers features such as three channels, XLR inputs, level meters, headphone monitoring, and versatile connectivity options for professional audio mixing.

How many channels does the mixer have?

The FMX-32A Field Mixer features three channels, allowing you to mix and control the audio from multiple sources simultaneously.

Is it suitable for field recording and location sound?

Yes, the FMX-32A is specifically designed for field recording and location sound applications, making it ideal for filmmakers, videographers, and sound recordists.

What types of audio sources can be connected to the mixer?

You can connect a variety of audio sources, including microphones, wireless systems, instruments, and more, to the XLR inputs of the FMX-32A.

Does it come with level meters for monitoring audio levels?

Yes, the FMX-32A Field Mixer is equipped with level meters that allow you to monitor and adjust audio levels with precision.

Can I monitor the audio through headphones?

Yes, the mixer includes a headphone monitoring output, allowing you to listen to the audio in real-time and make adjustments as needed.

What are the available input and output options on the mixer?

The FMX-32A Field Mixer offers a range of input and output options, including XLR inputs, line outputs, and headphone outputs, providing versatile connectivity with various audio equipment.

Is there a digital display for monitoring and settings?

The mixer typically does not include a digital display but relies on analog controls and level meters for audio monitoring and adjustment.

What is the power source for the mixer?

The mixer is typically powered by battery or external DC power, providing flexibility for field use.

Is there a warranty for the Azden FMX-32A 3-Channel Portable Field Mixer?

Warranty coverage for the FMX-32A Field Mixer typically ranges from 6 months to 1 year or more, ensuring the product's quality and durability.

Where can I purchase the Azden FMX-32A Field Mixer?

You can typically purchase the FMX-32A Field Mixer from authorized Azden retailers, audio equipment stores, or reputable online marketplaces to ensure you receive a genuine product.

Can it be used for documentary filmmaking?

Yes, the FMX-32A Field Mixer is well-suited for documentary filmmaking, providing precise control over audio quality and recording in challenging environments.

Does it have a built-in recorder?

The FMX-32A typically does not have a built-in recorder but serves as a high- quality mixer to enhance audio recording capabilities.

What is the build quality and durability of the mixer?

The FMX-32A Field Mixer is typically built with durable materials and components, ensuring its longevity and reliable performance in field recording situations.

Can I use it for live sound applications?

While primarily designed for field recording, the FMX-32A can also be used for live sound applications where portability and high-quality audio are essential.

DOWNLOAD THE PDF LINK:Azden FMX-32A 3-Channel Portable Field Mixer Operating Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>