REGENCY 946-834 18 Inch Vent Free Birch Log Placement User Guide

REGENCY 946-834 18 Inch Vent Free Birch Log Placement

Product Information

• Product Name: Birch 18 Log Placement Guide Vent Free Logs

• Part Number: 946-834

• Other Part Numbers: 003-166, 003-168, 003-169, 003-167, 003-170,
  003-171, 003-172, 920-733

• Date: 08.23.23

Product Usage Instructions

1. Ensure that the Birch 18 Log Placement Guide Vent Free Logs are compatible with your vent-free fireplace or heating system.
2. Before installation, carefully unpack all components and inspect them for any damage or defects. Contact customer support if necessary.
3. Refer to the user manual of your vent-free fireplace or heating system for specific installation instructions.
4. Place the Birch 18 Log Placement Guide Vent Free Logs in the designated area within your fireplace or heating system.
5. Follow the log placement guide provided with the product to arrange the logs in a realistic and aesthetically pleasing   manner.
6. Ensure that the logs are securely positioned and will not move during operation.
7. Once the logs are properly placed, connect the gas supply  according to the instructions provided by your vent-free fireplace or heating system manufacturer.
8. Perform a thorough inspection of all gas connections to ensure they are tight and leak-free.
9. Follow the ignition procedure specified by your vent-free fireplace or heating system manufacturer to start the unit.
10. Monitor the operation of your fireplace or heating system and check for any unusual noises, odors, or malfunctions. If any issues arise, discontinue use and contact customer support.
11. Regularly inspect and clean the Birch 18 Log Placement Guide Vent Free Logs to maintain their appearance and performance.

Note: Always prioritize safety and follow the instructions provided by your vent-free fireplace or heating system manufacturer.

Checking the Log Placement
After setting the logs from the appropriate log kit into position as described above, ensure each is properly and firmly seated flat in the grooves or notches.
A vent-free gas log set will not function as intended if the logs are not correctly positioned. When placed properly, the flames will not strike any portion of the logs.
Failure to properly place the logs will cause sooting and improper Carbon Monoxide output.
Periodically check the positioning of all logs to ensure proper log placement and stability. If any flame is striking the logs, recheck log placement. Adjust to conform with instructions. There should be no flame impingement on the logs.
Log placement should be re-checked as part of the fireplace maintenance procedure. Logs may not remain in their original position over time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>