JVCKENWOOD HA-XC62T Wireless Headphones User Guide

: June 13, 2024
: JVC

Table of Contents

JVCKENWOOD HA-XC62T Wireless Headphones
Product Information
Product Usage Instructions
For U.S.A.
For U.S.A.
For Canada
How To Use
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JVCKENWOOD HA-XC62T Wireless Headphones

JVCKENWOOD-HA-XC62T-Wireless Headphones-product

Product Information

Model No: HA-XC62T
Manufacturer: JVCKENWOOD Corporation
Address: 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN
FCC ID: 2ADZH62L

IC: 23340-62L

Supplier’s Declaration of Conformity:

Model Number: HA-XC62T
Trade Name: JVC
Responsible party: JVCKENWOOD USA Corporation
Address: 1440 Corporate Drive, Irving, TX 75038
Telephone Number: 678-449-8879

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Canada:

CAN ICES-3 (B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

For Europe:

European representative of JVCKENWOOD Corporation is: JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY

Product Usage Instructions

Charge the device using the provided charging case.
To turn on the device, press and hold the power button until the LED indicator lights up.
Pair the device with your preferred audio source (e.g., smartphone, tablet) via Bluetooth.
Adjust the volume using the volume control buttons on the device.
To play or pause audio, press the play/pause button on the device.
To skip to the next track, press the next track button on the device.
To answer or end a call, press the call button on the device.
To reject an incoming call, press and hold the call button for a few seconds.
To activate voice assistant (if supported), press and hold the play/pause button.
When not in use, turn off the device to conserve battery power.
Refer to the user manual for additional features and troubleshooting information.

For U.S.A.

Supplier’s Declaration of Conformity

Model Number : HA-XC62T
Trade Name : JVC
Responsible party : JVCKENWOOD USA Corporation
Address: 1440 Corporate Drive, Irving, TX 75038
Telephone Number: 678-449-8879
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

ATTENTION:
The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

For U.S.A.

The device is designed to meet the requirements for exposureto radio waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for usewhen properly worn on the head. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

For Canada

CAN ICES-3 (B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

For Europe

Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding Radio and RoHS. European representative of JVCKENWOOD Corporation is:
JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY

For United Kingdom

Dear Customer,
This apparatus is in conformance with the valid United Kingdom Regulations and standards regarding Radio and RoHS. United Kingdom representative of JVCKENWOOD Corporation is:
JVCKENWOOD U.K. Limited, First Floor, Gleneagles, the Belfry, Colonial Way, Watford, Hertfordshire WD24 4WH, UNITED KINGDOM

Declaration of conformities For Europe
Hereby, JVCKENWOOD declares that the radio equipment [HA-XC62T] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: (https://www.jvc.net/euukdoc/).

For United Kingdom

Hereby, JVCKENWOOD declares that the radio equipment [HA-XC62T] is in compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address: (https://www.jvc.net/euukdoc/).

For Europe and United Kingdom

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.This product contains rechargeable battery. Contact JVCKENWOOD authorised dealer for disposal.

WARNING

Do not listen at high volume for an extended period. Do not use while driving or cycling.
Pay special attention to traffic around you when using the headphones outside. Failure to do so could result in an accident.
This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire or the like.
This product contains rechargeable battery, which is not replaceable.
Danger of explosion if user replaced battery. Do not replace battery user own self.

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Warnings for battery
Please do not handle the battery in the following manners.
It can lead to an explosion or leakage of flammable liquids and gases.

For Europe and United Kingdom

BLUETOOTH SPECIFICATION

Frequency range: 2.402 GHz – 2.480 GHz
Output power: +x.x dBm (MAX), Power Class 1

For U.S.A.

Hearing Comfort and Well-Being

• Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play.
• If you experience a ringing in your ears, reduce volume or discontinue use.

Traffic Safety

Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
Do not turn up the volume so high that you cannot hear sound around you.

How To Use

Before using, make sure to remove the insulating sheet and charge.
During charging, the indicators flash. When charging is complete, all indicators light up.
Charging time: Approx. 3.5 hours (when charging the earphones and charging case at the same time)
Turn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list and perform connection.
Flashes slowly
Insert the earphones with the logo in the horizontal position. Rotate the earphones and adjust to the most comfortable angle.
Audio operation
Phone operation
After using the earphones, place them back into the charging case.

https://manual3.jvckenwood.com/accessory/headphones/global/

For detailed operations such as phone call, troubleshooting and information on the European Guarantee, please refer to the user manual.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.