NEWAGE 56 Manual Adjustable Height Worktable Instruction Manual

NEWAGE 56 Manual Adjustable Height Worktable Instruction Manual

INSTALLATION AND OPERATION GUIDE

Warning: Excessive weight hazard!

Use two or more people to move, assemble, or install the worktable to avoid back injury. Do not leave children unattended near the worktable.

ATTENTION: Is your Work Table damaged?

Need help or spare parts? For fastest service,
contact NewPage Products at 1-877-306-8930;
or support@newageproducts.com.
Do not return to the retailer.

Unpacking

• Begin by placing the package on a covered flat surface.
• Remove all cardboard, foam packaging material and nylon bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See “Tools Needed” in the list on next pages.

Product Inspection

• Check to see if all the parts are received as per the order.
• Contact New Age Products at 1-877-306-8930; for any missing parts.
• Inspect the products for any damages before starting the installation.
• Go through the installation instructions carefully before starting the installation.

IMPORTANT NOTES

• Two or more persons are required to install the worktable shown in this Installation Manual.
• The illustrations shown in this Install Manual are for representation purpose only. Actual sizes of the parts supplied in the package can be slightly different by appearance. Appearance of hardware sizes are enlarged for ease of understanding for the customer.

Additional Tools Needed

**#2 Philips Screw Driver

**

Worktop

SKU 32011
56 in. Bamboo Worktop
SKU 32111
56 in. Stainless Steel Worktop

Accessories

SKU 48080
Adjustable Height Work Table Drawer

Weight Capacity – 55 lbs

Product Specifications

Manual Adjustable Height Work Table

SKU 48041
56 in. Manual Adjustable Height Work Table

Work Table Max Height – 44.1”
Work Table Min Height – 29.5”
Height Adjustments – 14.6”
Adjustment Speed – 7.5cm/turn
Weight Capacity – 500lbs

Parts Supplied & Spare Parts

S. No.| Engg Part No.| Description| BOM Qty| Spare Part SKU| Spare Part Qty
---|---|---|---|---|---
1| H00706A-01| Button Head Hex Screw M5x6| 1| 48082| Pack of 1
2| H00707A-01| Button Head Hex Screw M6x10| 6
3| H00691A-01| Button Head Hex Screw M6x16| 20
4| H00692A-01| Hex Head Bolt M8x16| 4
5| H00693A-01| Button Head Hex Screw M8x30| 4
6| H00694A-01| Button Head Hex Screw M6x30| 8
7| H00703A-01| M8 Wrench -Number 13| 1
8| H00708A-01| Allen Key 3×3| 1
9| H00698A-01| Allen Key 4×4| 1
10| H00699A-01| Allen Key 5×5| 1
11| PB3-201.001A-01-XX| Adjustable Work table Base for Crank| 1| –| –
12| PB3-201.02A-01-XX| Adjustable Worktable Crank| 1| –| –
13| PB3-202.001A-01-XX| Adjustable Work table Supporting Tube Welding Assembly| 2| –| –
14| PB3-204.001A-01-XX| Adjustable Work table Supporting beam Welding Assembly – 56in| 2| –| –
15| PB3-201.003A-01-XX| Adjustable Work table Crank Right lifting column Assembly| 1| –| –
16| PB3.202.004A-01-XX| Adjustable Work table Left Lifting Column Assembly| 1| –| –
17| PB3.202.005A-01-XX| Adjustable Work table Foot Assembly| 2| –| –
18| PB3-204.002A-01-XX| Adjustable Work table Supporting Beam for Leg Welding Assembly – 56 in| 1| –| –
19| PB3- 204.003A-01-XX| Adjustable Work table Cover – 56 in| 1| |
20| PB3- 204.004A-01-XX| Adjustable Work table Transmission Rod -56 in| 1| –| –
21| H00656A-01| M6 Wood Flush Tapping Insert| 20| 48081| 1

Hardwares

• 20x Button Head Hex Screw M6x16 (A)
  

• 6x Button Head Hex Screw M6x10 (B)

• 1x Button Head Hex Screw M5x6 (C)

• 4x Hex Head Bolt M8x16 (D)

• 4x Button Head Hex Screw M8x30 (E)
  

• 13mm Wrench (F)
  

• 8x Button Head Hex Screw M6x30 (G)

• 5×5
  

• 4×4 Allen Key (H)
  

• 3×3
  

Worktop Frame Assembly

Parts required.

• 4 x M8x30 Button Hex Head Screws (E)

• Allen Key 5×5
  

• 12 x Button Hex Head Screws M6x16 (A)
  

• Allen Key 4×4
  

1. Attach the desk frame beam tube to the desk frame support tube using screw(E). Tighten the screws with a 5 x 5 Allen key.
   

2. Install the desk frame assembled in Step 1 on the tabletop using screws(A). Tighten 2 screw with a 4×4 Allen key.
   

Installing the Lifting Columns

Parts required.

• 8 x M6x16 Button Hex Head Screws (A)
• Allen Key 4×4

ATTENTION

Maintain consistent heights of the left and right lifting columns during the installation.

NOTE:
The supporting beam should be facing opposite side of the New Age logo

Connect the right & left lifting columns to the desk frame beam tube using screws. 3 Tighten the screws(A) with a 4 x 4 Allen key

Installing the Feet & Transmission Rod

• 8 x M6x30 Button Head Hex Screws (G)

• Allen Key 4×4
  

Connect the left and right columns to the feet. Tighten the screws(G) with a 4×4 Allen key.

Insert one end of the transmission hexagonal rod in the right lifting column , the closest to the New Age logo.

NOTE:
The transmission rod can be inserted to the left lifting column, however, in that assembly crank will be positioned left side of the table and up and down rotation will be inverted.

• 1 x M5x6 Button Head Hex Screw (C)
  

• Allen Key 3×3
  

Insert the other end to the left column.

Align the hexagonal rod end with the hole position in the left column by rotating.

Tighten the rod with screw(C) using a 3×3 Allen key.

Assembling Transmission Tube Cover

Parts required.

• 6 x M6x10 Button Head Hex Screws (B)
  

• Allen Key 4×4
  

Connect the cover to the left and right columns using screws. Tighten the screws (B) with a allen key.

Installing Support Beam

Parts required.

• 4 x M8x16 Hex Headed Bolts (D)

• 13mm Wrench (F)

Remove the decorative cover on the support beam.

Assemble the support beam with the bolts(D) to the left and right columns using wrench.

Reassemble the decorative cover on the support beam.

Installing the Crank Holder

Allen Key 4×4

Use 4×4 allen keys to uninstall the screws.

Insert the Crank holder to the transmission rod on the right column. Tighten the screws with allen key.

Insert the Crank to the crank holder as shown below.

Crank Handle Instructions

ATTENTION

When mechanism is locked, do not rotate the crank as this can cause damage to the mechanism.
Always unlock the crank before rotating it.

1. Pull out the crank handle when in use, push the crank inwards to lock it after use.
   

2. Rotate the crank in circular motion to increase or decrease the height of the table.
   

Accessory Installation

Parts required

• 4 x M6x16 Button Head Hex
  

• Allen Key 4×4

• Pull out Drawe
  

Install the drawer to the table top with the screws. Tighten the screws with allen key

Maintenance and Care

1. The steel in this product has been coated with industrial grade powder coating for a durable finish. To prevent any damage to this finish, do not allow harsh chemicals such as oils and grease to remain on the powder coating surface. Use a glass cleaner to clean and maintain all powder coated surfaces.
2. Our wood top is made from Bamboo, with a polyurethane coating to help protect it and extend its usage. It can be cleaned using a gentle household cleaner. Do not allow chemicals, water, or other substances to remain on the wood top for extended periods of time to reduce the risk of damage or stains.
3. When using our stainless-steel tops, do not allow harsh chemicals such as oils and grease to remain at the worksurface for an extend period, to prevent stains and damageto the top
4. Make sure to check once a year all the gears and moving parts for dirt and lubrification.

NEWAGE PRODUCTS INC.WORKTABLE MANUFACTURER WARRANTY

PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call our customer service team:

• Name, address and telephone number
• Product Name / SKU Number
• A clear, detailed description of the problem
• Proof of purchase including order number

Register your New Age Products purchase online for quicker customer assistance and access to exclusive benefits

Visit www.newageproducts.com/register/

Warranty Claim
For warranty service please contact New Age Products at 1-877-306-8930; or support@newageproducts.com
Please review all warranty details below, prior to contacting New Age Products for a claim.
Scan the QR code on the right to access our support page or
visit www.newageproducts.com/contact-us/

Scan this QR code with the camera on your mobile device to visit the NewAge Products Support Hub
www.newageproducts.com/support-hub/

FIVE YEARS LIMITED WARRANTY

WHAT IS COVERED

When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, New Age Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for the warranty duration from the purchase date of the product.

WHAT IS NOT COVERED

1. Service calls to correct the installation of any New Age products or to instruct you how to use or install them.

2. Damage resulting from improper handling, or products damaged by accident, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or mishandling.

3. Products damaged by improperly loading beyond the specified maximum weight capacity outlined in the instructions provided with the product.

4. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial environment, or handled in anyway inconsistent with the installation instructions included with the product.
   Cosmetic damage, including scratches, dings, dents or cracks in paint that do not affect the structural or functional capability of the product.

5. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.

6. Replacement parts for NewAge products outside Canada and the United States.

7. Loss of product contents due to theft, fire, flood, accident or acts of God.

8. Shipping or freight fees to deliver replacement products or to return defective products.

9. Any labor costs during the limited warranty period.

DISCLAIMER OF IMPLIED WARRANTIES

WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. THIS WARRANTY IS LIMITED TO THE ORIGINAL BUYER. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AT OUR DISCRETION AS PROVIDED HEREIN. NEWAGE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

References

• Contact Us - NewAge Products (US)
• Product Registration - NewAge Products (US)
• Product Support - NewAge Products (US)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>