NEWAGE 10-Outlet Power Strip with Surge Protection Instruction Manual
- June 5, 2024
- NEWAGE
Table of Contents
NEWAGE 10-Outlet Power Strip with Surge Protection
Installation and Operating Instructions
Is your product damaged?
- Need help or spare parts? For the fastest service, contact NewAge Products at 1-877-306-8930; or support@newageproducts.com. Do not return to the retailer.
- Do not expose the power strip or power cord to a moist environment.
- Do not use a power strip if the power cord has frayed, exposed, or has damaged wires.
- Do not cover the power strip or power cord with carpet, furniture, rugs, newspapers, clothing, or any other item.
- Do not staple or tack power strips or power cords. Visually inspect the power strip and cord on a regular basis to ensure that they are not damaged or showing sign of degradation.
- Insert plugs fully into the outlet so that no part of the prongs or the plug is exposed.
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
When this product is installed, operated, and maintained according to the instructions attached to or furnished with the product, NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for the warranty duration from the purchase date of the product.
WHAT IS NOT COVERED
- Service calls to correct the installation of any NewAge products or to instruct you how to use or install them.
- Damage resulting from products caused by accident, misuse, abuse, fire, flood, improper installation, acts of God, neglect, modification, or mishandling.
- Repairs or replacement when your product is used in other than normal, residential use, such as a commercial environment, or handled in any way inconsistent with the installation instructions included with the product.
- Cosmetic damage, including scratches, dings, dents, or cracks in the paint that do not affect the structural or functional capability of the product.
- Surfaces are damaged due to improper use of chemicals, and detergents.
- Replacement parts for NewAge products outside Canada and the United States.
- Loss due to theft.
- Damage resulting from the use of the product is contrary and not in accordance with the instruction manual.
- Any labor costs during the warranty period.
DISCLAIMER OF IMPLIED WARRANTIES
Implied Warranties, Including To The Extent Applicable Warranties Of Merchantability Or Fitness For A Particular Purpose, Are Excluded To The Extent Legally Permissible. Any Implied Warranties That May Be Imposed By Law Are Limited To One Year, Or The Shortest Period Allowed By Law. This Warranty Is Limited To The Original Buyer. Some States And Provinces Do Not Allow Limitations On The Duration Of Implied Warranties Of Merchantability Or Fitness, So This Limitation May Not Apply To You. This Warranty Gives You Specific Legal Rights, And You Also May Have Other Rights That Vary From State To State Or Province To Province.
LIMITATION OF REMEDIES
Your Sole And Exclusive Remedy Under This Limited Warranty Shall Be Product Repair Or Replacement At Our Discretion As Provided Herein. Newage Shall Not Be Liable For Incidental Or Consequential Damages. Some States And Provinces Do Not Allow The Exclusion Or Limitation Of Incidental Or Consequential Damages, So These Limitations And Exclusions May Not Apply To You. This Warranty Gives You Specific Legal Rights, And You Also May Have Other Rights That Vary From State To State Or Province To Province.
Product Inspection
• Check to see if all parts are received as per the order placed.
• Contact NewAge Products at
1-877-306-8930; for any missing parts.
• Inspect the products for any damages before starting the installation.
• Go through the installation instructions carefully before starting the
installation.
Parts Supplied and Spare Parts
Tools Needed
Wall Installation
Back Mounting
Power strip can be mounted to the stud wall using the back mounting brackets. Back mounting brackets lets the power bar to adjust left and right.
- Mark the circular hole of two back mounting brackets on the wall studs using a marker.
- Pre-dill 3mm holes at the marked locations using a power drill.
- Install back mounting brackets onto the wall studs using M4X70mm lag screws.
- Slide the power strip from the sides as shown in the image below.
Side Mounting (Optional)
A power strip can also be mounted to the wall studs using the side mounting brackets. This option fixes the power strip in position, not allowing it to slide left and right.
Slide the side mounting brackets at both ends on the back of the power strip.
Place the power strip on the wall and mark the holes of the side mounting brackets on wall studs.
Side Mounting
Pre-drill 3mm holes at marked locations using a power drill and install the M4X70mm lag screws. Do not fully tighten the screws.
Mount the power strip on the lag screws with the support of side mounting brackets. Tighten the lag screws using a Phillips head screwdriver.
Pegboard Mounting
- Back mounting brackets are also used to mount the power strip on pegboards. Follow the below instructions to install a power strip on pegboards.
- Fix the two back mounting brackets to the peg board using carriage bolts.
- Secure the carriage bolt from the back side of the peg board using a washer, lock washer, and a nut.
Slide the power strip onto the brackets as shown in the image below.
References
- Contact Us - NewAge Products (US)
- Product Registration - NewAge Products (US)
- Product Support - NewAge Products (US)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>