Kanlux 34470 ATERO LED Table Lamp User Manual
- June 13, 2024
- Kanlux
Table of Contents
Kanlux 34470 ATERO LED Table Lamp User Manual
Tools Requirement
-
P
-
P
-
**P
P7
**
-
P
-
**P
**
-
P
-
P
-
**P
**
- **P
**
- **P
**
-
P
-
**P
**
-
P
-
**P
**
- **P
**
- **P
**
- **P
**
- **P
**
-
P
-
P
-
P
-
**P
**
- **P
**
- P
INTENDED USE/APPLICATION
Product designed to be used in the home and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Any activities to be done with disconnected power supply. The product can be connected to a supply network which meets energy quality standards as prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Product equipped with electrical connector. Possibility of dimming only by means of an internal electronic system. The product comes with a USB port. The product has 3 modes of operation.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature. The light source becomes heated to a high
temperature. Product can only be supplied by rated voltage or voltage within
the range provided. Product must not be used in unfavourable environment, e.g.
dust, moisture, water, vibrations, etc. If the cord isolation or casing is
damaged, the product cannot be used. Not suitable for independent repairs.
ATTENTION! Do not look directly at LED light beam.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Class II. A product in which protection against electric shock is
provided not only through basic insulation, but also double or reinforced
insulation.
P3: Supply voltage.
P4: Rated durability.
P5: Colour temperature.
P6: Colour Rendering Index.
P7: Class III. A product in which protection against electric shock is
provided by feeding it with very low safe voltage (SELV) with no risk of
creating higher than safe voltage.
P8: Rated power.
P9: Rated luminous flux.
P10: Rated luminous flux. The specified luminous flux refers to the light
source (LED module) used. P11: This symbol means that the product can be
installed and operated in/on a surface made of materials which are normally
flammable.
P12: Protection against solid foreign objects bigger than 12mm provided.
No protection. P13: Use only indoors.
P14: The symbol describes the minimal distance of a light fixture (its
light source) from the spots and objects that it’s illuminating.
P15: Viewing angle.
P16: The product is not compatible with lighting dimmers. Possibility of
dimming only by means of an internal electronic system
P17: The chipped globe, screen or protective shield must be replaced
immediately.
P18: Product meets the requirements of EU directives.
P19: The product is compliant with all relevant United Kingdom
regulations.
P20: Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P21: This product is equipped with a light source with energy efficiency
class F.
P22: The LED light source can only be replaced by qualified personnel
(Kanlux service only).
P23: The control panel or control equipment can be replaced by the end
user.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P24: This labelling indicates the requirement to selectively collect
waste electronic and electrical equipment. Products labelled in this way must
not be disposed of in the same way as other waste under the threat of a fine.
These products may be harmful to the natural environment and health, and
require a special form of recycling/neutralizing. Information on collection
centers is provided by local authorities or sellers of such goods. Used items
can also be returned to the seller when new product is purchased, in quantity
no larger than the purchased item of the same type. The above rules regard the
EU area. In the case of other countries, regulations in force in a given
country must be applied. Contacting the distributor of our products in a given
area is recommended.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit : www.kanlux.com Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>