zenitel TMIS-1 Turbine Mini IP Intercom User Manual
- June 13, 2024
- Zenitel
Table of Contents
zenitel TMIS-1 Turbine Mini IP Intercom
INSTRUCTION
Turbine Mini Intercom
This document describes the mounting procedures and connections of the
TMIS-X Turbine Mini intercoms.
| Item Number | Type | Item Name |
|---|---|---|
| 1008116010 | TMIS-1 | Turbine Mini IP Intercom |
| 1008116040 | TMIS-4 | Turbine Mini IP Intercom, 2 Buttons |
| 1008140020 | TA-2 | Turbine Flush Mount 2-Gang Double-Depth Back Box |
| 1008140030 | TA-3 | Turbine Flush Mount 2-Gang Back Box |
Flush Mount 2-Gang Back Boxes – TA-2 & TA-3
DIMENSION
It is recommended to utilize back boxes with weep holes at the bottom
Flush Mounting Procedure
Connections
The TMIS-X Turbine Mini IP intercom has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
- When the Turbine Mini intercom is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the intercom speak its IP address, press the call button on the station
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel and Vingtor-Stentofon products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements contain Zenitel or third-party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend: Zenitel – All rights reserved.
www.zenitel.com
cs@zenitel.com