COLMI P8 Plus Smart Watch User Manual

COLMI P8 Plus Smart Watch

Welcome to use our high-performance wristband smartwatch which creates a thoughtful and healthy experience for you.

Device maintenance

Please remember the following tips when you maintain your smartwatch:

• Clean the smartwatch regularly, especially its inner side, and keep it dry.
•  Adjust the smartwatch tightness to ensure air circulation.
• Excessive skincare products should not be used for the wrist wearing the smartwatch.
• Please cease wearing the smartwatch in case of skin allergy or any discomfort.

**Schematic diagram of the main body of the smartwatch

**

Power-on

Long press the side button for 3 seconds or plug in the charging clamp to charge the smartwatch.

Downloading and binding of smartwatch APP

Download and install APP

• Scan QR code with a mobile phone to download APP.
• For the 10S system, select APP, store search Da Fit.

Android system, select Google Play to download and install Da Fit. Or scan QR code to download
Note: your mobile phone must support Android 5.1 or 10S 8.0 or above, and Bluetooth 4 .0 or above.

Bind smartwatch with APP

1.  Click on “Add Device” to bind the smartwatch.
2.  Click on your device in the device list scanned.
3.  Successfully bound.

Introduction of smartwatch functions

Power-on status
Switch the menu interfaces of the main screen, as the interfaces shown in the following:

Remove Device

• For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on remove device.
• For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth and choose to ignore the device. As shown below:

Frequently Asked Questions (FAQs)

1. Why does the smartwatch disconnect Bluetooth automatically when the Android screen goes out?

2. Lock background APP. When the Da Fit process is cleared, the smartwatch will be disconnected from the mobile phone.

3. Set APP self-startup

4.  Unrestricted background operation.
   The Android mobile phone installed with the APP intelligently restricts the background operation by default, and App should be set manually without any restriction.

5. Why the smartwatch cannot receive message pushes?

6. Please confirm that you have turned on the switch for message push at the Da Fit APP.

7. Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smartwatch is completed by reading the message from the mobile phone notification bar. The smartwatch will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of Facebook, Twitter, call, SMS and mobile phone client).

8. Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Da Fit.

9. Why can’t take a hot bath with the smartwatch?

10. The bathwater has a relatively high temperature and generates a lot of vapor which is in the gas phase with a small molecular radius and can easily infiltrate into the smartwatch from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smartwatch and damage the circuit board and then damage the smartwatch.

Note: For more FAQs, please refer to Da Fit APP feedback.
Warning: The smartwatch should not be used for any medical purpose though it dynamically monitors the heart rate in real-time.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
  Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference lo radio communications. However, there is no guarantee that interference will not OCOJr in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by joining the equipment off and on, the user is encouraged to try to COITeci the interference by one or more of the following

• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that lo which lhe receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>