ColMi P28 Plus Smart Watch User Manual

ColMi P28 Plus Smart Watch

P28 Plus Smart Watch

Welcome to use our high-performance wrist-band smart watch which creates thoughtful and health experience for you.

Device Maintenance

• Clean the smart watch regularly, especially its inner side, and keep it dry.
• Adjust the smart watch tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart watch.
• Please cease wearing the smart watch in case of skin allergy or any discomfort.
• Do not take a hot bath with the smartwatch. The bath water has a relatively high temperature and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into the smart watch from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart watch and damage the circuit board and then damage the smartwatch.

Appearance Description

1. 1.69 touchscreen
2. Multifunction button
3. Watch strap (width:20mm)
4. Microphone
5. Magnetic charging
6. Heartrate sensor
7. Speaker

Multifunction Button Introduction

• When shutdown, long press to turn on the P28 Plus
• When turn on, short press to turn on the display
• When turn on, long press to turn off the P28 Plus
• Short press to turn off the display.

APP Download and Connection

APP Download
Use your phone to scan the QR code to download the Da Fit by Google Play or APP Store. After installation according to the guidance, it can be used.

First Use Da Fit

1. 1. Enter the parameters

2. Enter the Gender
3. Enter the date of birth

The wrong body parameter setting will cause slight deviation in the relevant detection of p28 plus. When entering weight, please select the correct unit.

1. Enter the height
2. Enter the weight

First Connection to P28 Plus

1. 1. Tap TO ADD to add P28 Plus

2. Find the P28 Plus
3. Tap the P28 Plus and connect it
4. Pair with P28Plus_Phone

The above operation steps are carried out by using Android mobile phones. The operation interface of mobile phone system may vary slightly due to different mobile phones. Please understand.

1. Finish the connection
2. P28 Plus_ Phone can be queried or deleted under the Bluetooth connection list of the system

Da Fit Connection of iOS System

1. Tap ADD A DEVICE to Find the P28 Plus add the P28 Plus
2. Tap the P28 Plus and connect it
3. Pair with P28Plus_Phone
4. Finish the connection
5. Enter bluetooth search in system Settings, search for P28 Plus_Phone, and connect it to complete the bluetooth call connection.

P28 Plus Interface Operation Instructions

Dial instructions
Long press the dial to enter the dial switching interface and slide left and right to switch the dial.

Quick interface instructions
Left swipe on the dial interface to enter the shortcut interface:

1. 1. View call records

2. Dialing keypad
3. Contacts (need to be synchronized to watch via Da Fit)
4. Click to use intelligent voice input (need to synchronize to the watch through Da Fit)
5. Schematic diagram of sports compliance
6. Actual steps / target steps
7. Actual movement time / target movement time
8. Actual calorie consumption / target calorie consumption
9. Steps per hour from 0:00 to 24:00 of the day
10. Total number of steps in 7 days
11. Daily steps in 7 days

The step counting data of p28 plus may have slight deviation due to incomplete capture of walking motion. At the same time, wrong body parameters may lead to slight deviation in calorie consumption.

Product Usage Instructions

1. Regularly clean the smart watch, especially its inner side, and keep it dry.
2. Adjust the tightness of the smart watch to ensure air circulation.
3. Do not use excessive skincare products on the wrist wearing the smart watch.
4. If you experience skin allergy or any discomfort, stop wearing the smart watch.
5. Avoid taking a hot bath with the smartwatch to prevent damage to the circuit board.
6. To turn on the P28 Plus, long press the multifunction button when it is shut down.
7. To turn on the display, short press the multifunction button when it is turned on.
8. To turn off the P28 Plus, long press the multifunction button when it is turned on.
9. To turn off the display, short press the multifunction button when it is turned on.
10. Download the Da Fit app by scanning the QR code and follow the instructions to set up your profile and connect your P28 Plus to your phone.
11. Use the quick interface to access features such as call records, dialing keypad, contacts, and more.
12. Use the touchscreen to navigate through different displays and features.

Welcome to use our high-performance wrist-band smart watch which creates thoughtful and health experience for you.

Maintenance

Please remember the following tips when you maintain your smart watch:

• Clean the smart watch regularly, especially its inner side, and keep it dry.
• Adjust the smart watch tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart watch.
• Please cease wearing the smart watch in case of skin allergy or any discomfort.
• Why can not take a hot bath with the smartwatch?
  P.S. The bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into the smart watch from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart watch and damage the circuit board and then damage the smartwatch.

Product description

1. 1.69” touchscreen
2. Multifunction button
3. Watch strap (width:20mm)
4. Microphone
5. Magnetic charging
6. Heartrate sensor
7. Speaker

 Multifunction button introduction

When shutdown, long press to turn on the P28 Plus
When turn on, short press to turn on the display

When turn on, long press to turn off the P28 Plus
Short press to turn off the display.

APP download and connection

APP download

Use your phone to scan the QR code to download the “Da Fit” by Google Play or APP Store.
After installation according to the guidance, it can be used

First use Da Fit

1. First use Da Fit
   

2. Enter the parameters
   

3. Enter the Gender
   

4. Enter the date of birth
   

5. Enter the height
   

6. Enter the weight
   

7. Start to useP.S. The wrong body parameter setting will cause slight deviation in the relevant detection of p28 plus. When entering weight, please select the correct unit

First connection to P28 Plus

1. Tap “TO ADD” to add P28 Plus
   

2. Find the P28 Plus
   

3. Tap the P28 Plus and connect it
   

4. Pair with P28Plus_Phone
   

5. Finish the connection
   

6. P28 Plus_ Phone can be queried or deleted under the Bluetooth connection list of the system
   

P.S. The above operation steps are carried out by using Android mobile phones. The operation interface of mobile phone system may vary slightly due to different mobile phones. Please understand

Da Fit connection of iOS system

1. Tap “ADD A DIVECE” to add the P28 Plus
   

2. Find the P28 Plus
   

3. Tap the P28 Plus and connect it
   

4. Pair with P28Plus_Phone
   

5. Finish the connection
   

6. Enter bluetooth search in system Settings, search for P28 Plus_Phone, and connect it to complete the bluetooth call connection.
   

P28 Plus interface operation instructions

• Dial instructions
  P. S. long press the dial to enter the dial switching interface, and slide left and right to switch the dial
  

• Quick interface instructions

  • Left swipe on the dial interface to enter the shortcut interface
    

1. View call records

2. Dialing keypad

3. Contacts (need to be synchronized to watch via Da Fit)

4. Click to use intelligent voice input (need to synchronize to the watch through Da Fit)
   

5. Schematic diagram of sports compliance

6. Actual steps / target steps

7. Actual movement time / target movement time

8. Actual calorie consumption / target calorie consumption

9. Steps per hour from 0:00 to 24:00 of the day

10. Total number of steps in 7 days

11. Daily steps in 7 days
    P.S. The step counting data of p28 plus may have slight deviation due to incomplete capture of walking motion; At the same time, wrong body parameters may lead to slight deviation in calorie consumption.
    

12. Total sleep time of the day

13. Start and end time of sleep at that time

14. Sleep level

15. Sleep distribution, including mild sleep and light sleep
    P.S. The sleep monitoring period of p28 plus is from 8 P.M. to 10 A.M., and beyond this period, it will not be included in the sleep data

16. Current heart rate measurement

17. Maximum heart rate of the day
    

18. Minimum heart rate of the day

19. Schematic diagram of 24-hour heart rate (this function needs to use Da fit to turn on continuous heart rate test, and continuous heart rate detection will increase the power consumption of p28 plus and reduce the standby time)

20. Current heart rate level
    P.S. Recommended resting measurement; The heart rate measurement results of p28 plus may deviate due to the user’s wearing method; The heart rate measurement data of p28 plus is for reference only and cannot be used for medical purposes
    

21. Current measurement of blood oxygen value

22. Maximum blood oxygen of the day

23. Minimum blood oxygen value of the day

24. Last 7 times blood oxygen measurements
    P.S. Recommended resting measurement; The blood oxygen measurement results of p28 plus may deviate due to the user’s wearing method; The blood oxygen measurement data of p28 plus is for reference only and cannot be used for medical purposes
    

25. Weather information of the day

26. Future weather information
    P.S. The weather function needs to be connected to the mobile app Da fit, and the mobile phone needs to be connected to the Internet; This weather data is provided by a third-party weather data provider, If it is inconsistent with the actual local weather, please understand
    Swipe down the dial interface to enter the shortcut setting interface

27. Device connection icon (not shown if not connected)

28. Battery power display

29. Date display

30. No disturb quick switch (legend shows no disturb on)

31. Brightness shortcut button, click to enter the brightness setting interface

32. Power saving mode quick switch (the legend shows that the power saving mode is on)

33. Call Bluetooth shortcut switch (legend shows call Bluetooth on)

34. Flashlight mode shortcut button, click to open flashlight mode

35. Set shortcut button. Click to enter the setting interface
    Right swipe the dial interface to enter the cellular menu interface
    Cellular menu interface

Scroll down the dial interface to enter the list menu interface

36. Messages reminder interface
37. Activity interface
38. Sleep information interface
39. Heart rate measurement and information interface
40. Training mode interface
41. Phone function interface
42. Blood pressure measurement and information interface
43. Blood oxygen measurement and information interface
44. Weather information interface
45. Remote camera interface
46. Remote control music interface
47. Intelligent voice assistant interface
48. Breathing training interface
49. Stopwatch interface
50. Alarm clock interface
51. Countdown timer interface
52. Game interface
53. Flashlight interface
54. Other settings interface P.S
    *This function needs to be connected to the mobile Da fit or set in Da Fit
    **This function needs to connect mobile app and Bluetooth call

Da Fit operating instructions

• Health information description

55. Date

56. Accumulated number of walks today

57. Accumulated walking distance today

58. Accumulated walking

59. calorie consumption today

60. Accumulated walking hours today

61. Sleep duration of the previous day

62. Legend of sleep data of the previous day

63. Last heart rate measurement data

64. Heart rate level legend

65. 24-hour heart rate detection data

66. Legend of 24-hour heart rate detection data

67. Last blood pressure measurement data

68. Legend of blood pressure level

69. Last blood oxygen measurement data

70. Legend of blood oxygen level

71. Outdoor running distance

72. Outdoor running data
    Step counting interface description
    
    

73. Historical step data query

74. Step counting data statistics of day

75. Step counting data statistics of week

76. Step counting data statistics of month

77. Total steps of the day

78. Legend of current day step distribution

79. Walking distance of the day
    Walking calorie data of the day

80. Walking time of the day

81. Met of the day

82. Legend of weekly step data statistics

83. Legend of walking goal achieved in the last seven days

84. Comparison of daily walking number with the same type of people

P.S. The step counting data of p28 plus may have slight deviation due to incomplete capture of walking motion; At the same time, wrong body parameters may lead to slight deviation in calorie consumption. Please understand

Sleep interface description

86. Historical sleep data query

87. Sleep data and distribution legend

88. Statistical legend of sleep data

89. Average heart rate during sleep

90. Heart rate legend during sleep
    

91. Last 7 Days Sleep Trends

92. Legend of sleep time compared with others

93. Legend of awake time compared with others

94. Sleep duration compared with others

P.S. The sleep monitoring period of p28 plus is from 8 p.m. to 10 a.m., and beyond this period, it will not be included in the sleep data

Heart rate interface description

95. Historical heart rate data query
96. Last measured heart rate data
97. Last measured heart rate data level
98. Legend of the last 7 times heart rate data
99. Click to measure heart rate

P.S. Recommended resting measurement; The heart rate measurement results of p28 plus may deviate due to the user’s wearing method; The heart rate measurement data of p28 plus is for reference only and cannot be used for medical purposes

24-hour heart rate interface description

100. Historical 24-hour heart rate data query
101. 24-hour heart rate data measured today
102. 24-hour heart rate data measured this week
103. 24-hour heart rate data measured this month
104. Legend of 24-hour heart rate data
105. 24-hour heart rate data detection duration
106. 24-hour heart rate data grade distribution

P.S. The 24-hour heart rate of p28 plus is measured every 30  minutes. The measured data may slightly deviate from the actual heart rate due to the wrist movement during wearing; The heart rate measurement data of p28 plus is for reference only and  cannot be used for medical purposes

Blood pressure interface description

107. Historical blood pressure data query
108. Legend of blood pressure measured this time
109. Blood pressure data measured this time
110. Legend of the last 7 times blood pressure data
111. Click to measure blood pressure

P. S. recommended resting measurement; The blood pressure measurement results of p28 plus may deviate due to the user’s wearing method; The blood pressure measurement data of p28 plus is for reference only and cannot be used for medical purposes

Description of blood oxygen interface

112. historical blood oxygen data query
113. blood oxygen data measured this time
114. Legend of blood oxygen measured this time
115. Legend of the last 7 times oxygen data
116. Click for blood oxygen measurement

P. S. recommended resting measurement; The blood oxygen measurement results of p28 plus may deviate due to the user’s wearing method; The blood oxygen measurement data of p28 plus is for reference only and cannot be used for medical purposes

GPS running interface

117. GPS run distance this time
118. GPS running time
119. Calories burned in this GPS run
120. This GPS run pace
121. Steps of this GPS run
122. Long press to select exit or pause
123. Current GPS signal strength 124: Click to enter map mode

P. S. GPS running function uses the GPS data of the mobile phone. Please carry the mobile phone when using this function

Setting interface description

125. Connected device name
126. Device connection status
127. Bluetooth MAC address of connected device
128. Connected device battery level
129. Remove connected devices
130. Preview of connected devices
131. Dial setting and downloading interface
132. Message push settings
133.  Alarm clock setting
134. Remote camera
135. Frequently used contacts
136. Other settings
137. Connected device software upgrade

The dial download interface requires the user’s authorization. Da fit can use the mobile network function permission
The camera used by the remote camera function is that Da fit calls the main camera of the mobile phone, and Da fit cannot call the macro lens, wide-angle lens, etc. in the multi camera of the mobile phone
Favorite contacts can add up to 8 phone numbers to the watch synchronously

Dial setting and downloading interface

138. Built in dial selection

139. Custom dial editing

140. Dial download market
     *The dial download interface requires the user’s authorization. Da fit can use the mobile network function permission
     

141. Dial market interface

142. Cancel editing dial

143. Save edit dial

144. Select dial picture

145. Reset edited content

146. Edit dial Preview

147. Time position selection

148. Above Time data selection, including date, sleep, heart rate and step count

149. Below time data selection, including date, sleep, heart rate and step count

150. Text color selection

Messages reminder setting interface

151. Set Da fit’s permission to read mobile phone notification bar
152. App notification switch

P. S. This function requires the user to set that each app has the permission to use the notice bar

Alarm clock setting interface

153. Set the details of the alarm clock, including hour, minute and week
154. Alarm switch

Common contact interface

155. Favorite contacts added
156. Add frequently contacts
157. Synchronize favorite contacts to P28 plus

Other settings

158. Find the watch, the watch will vibrate after click it.

159. Time format setting, 12-hour and 24-hour modes can be selected

160. Distance unit format setting, metric unit and Imperial unit can be set

161. Undisturbed mode setting, start and end time can be set

162. Sedentary reminder settings

163. 24-hour heart rate detection switch. After it is turned on, the heart rate is detected every 30 minutes

164. Remote control music switch, turn on to synchronize song information to P28 plus

165. Power saving mode switch, which will be turned off when turned on: call Bluetooth, vibration, Raise your hand to light up the screen, push messages, and set the brightness to the lowest

166. Language setting: you can set the UI Language of P28 plus, including English, simplified Chinese, Japanese, Korean, German, French, Spanish, Arabic, Russian, traditional Chinese, Ukrainian, Italian and Portuguese

167. Screen off time setting, 5S, 10s, 15s and 20s screen off can be set

168. Restore the factory settings. Click to reset all P28 plus data

169. Raise the hand to light the screen switch

170. Raise your hand to light up the screen execution period
     

171. Drinking water reminder switch

172. Start time of drinking water reminder

173. Setting of drinking times

174. Drinking time interval setting

175. Weather switch

176. Temperature format setting, you can set Celsius and Fahrenheit

177. City setting, you can select the city

178. Female physiological period reminder

179. Total days of physiological period

180. Menstrual days

181. Start date of last menstruation

182. Reminder mode, you can set menstrual reminder, ovulation reminder, ovulation peak reminder and ovulation end reminder

183. Reminder time, you can set the specific reminder time

184. Physiological cycle calendar

Personal Center

185. Personal information setting, which can be set: gender, date of birth, height, weight and step size
186. Moving target setting
187. Da fit whitelist setting guide
188. About Da fit, you can view the version description, privacy policy, software license and service agreement

Note: For more FAQs, please refer to Da Fit APP feedback.

Warning: The smart watch should not be used for any medical purpose though it with dynamically monitor the heart rate at real time .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>