COLMi C60 Smartwatch User Manual
- June 9, 2024
- COLMI
Table of Contents
C60
User manual
C60 Smartwatch
*PLEASE READ THE USER MANUAL BEFORE USING PRODUCT
Scan the QR code with your phone to open the APP FitCloudPro on your phone to
setup the device
CHARGE AND ACTIVATE
Align the magnetic charger with the magnetic hole on the back of the watch
until it reaches the watch. When the charging prompt appears, please charge
the watch in time when the power is low. The backup is an all-in-one machine,
and the rear shell and battery cannot be removed.
BUTTONS AND TOUCH
- Long press to turn on the watch when off state.
- In the power-on state, press and hold to display the shutdown page, and swipe the right page to shut down.
- Rotate the switchable dial on the dial page.
- Press once on the watch dial to enter the menu, and press the knob key twice in quick succession to switch the menu styles.
- On the menu interface, you can rotate the button to scroll the menu and zoom icons.
- When on the other interfaces, press the button to return to the watch dial interface.
SMART WATCH APP DOWN – LOAD AND CONNECTION
http://fitcloud.hetangsmart.com/qrcode/
Scan the QR code above to download
- Download the “FitCloudPro” APP on your mobile phone and install it. You can scan the QR code in this manual, or scan the QR code on your watch, or directly search for “FitCloudPro” in the APP mall to download.
- Connect the smart watch.
- Scan the QR code to connect: After the mobile phone turns on the Bluetooth, enter the APP (Note: If the APP cannot be opened, please turn on the positioning of your phone and then open the APP) Click on the device -> Click on ‘Add Device’ -> Click on ‘Scan QR Code Binding’ (scan the QR code on the watch).
- Manual connection: After the mobile phone turns on Bluetooth, enter the APP (Note: If the APP cannot be opened, please enable the mobile phone positioning function and then open the APP) Click ‘Device’ -> Click ‘Add Device’ -> Click ‘Search Device’ (Find the corresponding item in “Settings” -> “System” -> “System Information” in the watch sliding control center Bluetooth name and MAC address of the device) -> Click ‘Connect’.
- Connect to Bluetooth call: In the initial state of the watch, the Bluetooth call is turned off, and the call and music functions cannot be used at this time. Slide down to open the ‘Control Center’, click the ‘Headphone’ icon, turn on the audio mode, and then turn on the Bluetooth call in the mobile phone system (when the mobile phone’s Bluetooth is turned on/down), find the corresponding Bluetooth name, and click ‘Connect’. After the connection is successful, the call and music functions can be used normally.
INSTRUCTIONS FOR USE
-
Alipay interface: Double-click the screen on the dial page to enter the Alipay interface.
-
Dial interface: Long press the screen to enter the dial selection interface, swipe left or right to switch the dial, and click once after confirming the dial.
(Note: The system presets 14 watch dials, the last dial is “customize”, this watch dial will change with the watch dial market updating of the APP port and the download settings of the custom watch dial) -
Menu interface: On the dial interface, press the knob on the side to enter the menu interface. After entering the menu interface, press the lower knob twice in quick succession to enter the menu switching interface, and press it to return to the main interface.
-
Function interface: Click the application icon on the menu interface to enter the corresponding function interface, swi pe right to return, and press the side knob to return to the main watch dial interface.
FUNCTION INTRODUCTION
Alarm| After the smart watch is connected to the APP, you can set a single
mode alarm clock, a cycle mode alarm clock, and a maximum of 5 alarm clocks.
---|---
Stopwatch| Click the start button to start timing, click the pause button to
pause the timing, and click the reset button to reset the timing to zero. Up
to 99 pieces of data can be saved.
Breathing Training| There are 1 minute and 2 minute options for breathing
training. The user clicks the corresponding duration to perform breathing
training. After clicking start, follow the icons in the breathing training to
zoom in and inhale, and zoom out and exhale.
Blood pressure| When entering the blood pressure measurement interface, the
green light at the bottom lights up to start the test for 30~60
seconds, and there will be a vibration reminder when the measurement is
completed. This measurement is a measurement based on PPG technology.
Women’s health| After the device is connected to the APP, turn on the women’s
health reminder on the APP, and you can view the women’s health reminder
information on the watch.
Heart rate| When entering the heart rate measurement interface, the bottom
green light lights up to start the measurement, and there will be a vibration
reminder when the measurement is completed in about 40 seconds. If it prompts
“not wearing the watch”, you need to re-wear the watch.
SPO2| When entering the blood oxygen measurement interface, the green light at
the bottom lights up to start the test for 30~60 seconds, and there will be a
vibration reminder when the measurement is completed. This measurement is a
measurement
based on PPG technology.
Alipay| Scan the QR code with Alipay on your mobile phone to bind, click
“Agree to the Agreement and Bind” after the binding is successful, double-
click the home screen to display the Alipay payment code, and you can also
unbind. (Note: This function
can only be accessed in Chinese and English languages)
NFC| Currently, only unencrypted door cards with a frequency of 13.56MHZ are
supported on the NFC market.
Sports| Options for sports mode: walking, running, cycling, mountaineering,
swimming, yoga, elliptical machine, basketball, etc., click the icon to start
the exercise interface.
Weather| After the device is connected to the APP, the weather interface will
display the real-time weather temperature and content.
Message| After the device is connected to the APP, the weather interface will
display the real-time weather temperature and content.
Settings| The functions of settings include screen display (switching dials,
brightness adjustment of the screen time, turning the wrist to brighten the
screen), language, vibration intensity, menu style, battery, QR code, and
system.
Music| After the device is connected to the APP, it can control the pause and
start of the mobile phone music player, adjust the volume and switch songs.
Sedentary reminder| You can set the ‘Sedentary reminder’ to be turned on in
the APP. After turning it on, you can set the start, end time, and do not
disturb time period.
Sleep| Display the sleep monitoring status of the day, and the data is updated
every day. When connecting to the APP, the data can be saved synchronously,
and the device will recalculate the data information of the new day.
Dial switch| Press and hold for 2 seconds on the main interface screen to
enter the watch dial switching interface, slide left and right to
switch the waiting watch dial, and click
Sports data| Display the number of steps, distance, and calories recorded on
the day. You can set the target number of steps, distance, and calories in the
APP.
Drink reminder| It can be turned on in the ‘Settings’ ->’Drinking water
reminder’ of the App. After turning on, you can set the start, end time, and
reminder interval.
Find Phone| After the device is connected to the APP, click to find the mobile
phone, the mobile phone will ring to indicate that the search is successful;
if the watch is not connected to the APP, the watch will prompt that it is not
connected.
Control center| Overview of functions: Do not disturb, turn on the wrist to
brighten the screen, brightness, settings, find mobile phone, power saving
mode, system
Timer| In the timing function, the system presets the commonly used timing
duration. Users can click the corresponding duration to quickly time the
timing, or click the custom button to set the time. Click the start button to
start the timing, click the pause button to pause the timing, click the reset
button to reset the timing to zero.
FREQUENTLY ASKED QUESTIONS
-
The watch cannot be turned on
Please press and hold the power button for more than 3 seconds or the battery may be low and need to be charged in time. -
Bluetooth is not connected or cannot be connected
-
Please try to restart the watch and reconnect.
-
Please try to connect again after restarting your phone’s Bluetooth.
-
Do not connect the phone to other Bluetooth devices at the same time.
-
Hand measurement of heart rate / blood pressure / blood oxygen / ECG is inaccurate
-
During general measurement, the sensor of the watch is not in correct contact with the human body.
-
When measuring, please pay attention to the full contact between the sensor and the wrist.
-
For people with darker skin and more arm hair, please turn on ”Enhanced measurement” in ”Device” ->Enhanced measurement in the App.
-
Sleep data is not accurate enough
-
Sleep monitoring is the state of simulating people’s self recognized time to fall asleep and wake up, and needs to wear the device correctly.
-
If you wear it too late or when you fall asleep, there may be errors.
-
Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 pm to 12:00 noon the next day.
For more frequently asked questions, please check the App” My’ – ‘>FAQ
FREQUENTLY ASKED QUESTIONS
When connected to a mobile phone, the device will synchronize some data with
the mobile phone through Bluetooth in time, including weather, notification
messages, sports health data, etc. This data will not be synced when the
connection is dropped or Bluetooth is turned off.
Notice:
- Do not charge in a humid and watery environment.
- Please regularly clean the magnetic charging hole on the back of the watch with a clean flannelette to ensure that the magnetic charging hole of the watch fits the magnetic charger to ensure normal charging.
- This product is not equipped with a power adapter. In order to ensure the safety of family members and property, you can use the computer USB interface or choose a power adapter with an output of no more than 5V……1A when charging. Please buy power adapters through regular channels, and avoid using low – quality, fake power adapters to avoid bursting or fire.
PRECAUTIONS
- The measurement results of this product are only for maternity examinations, and are not used for any medical purpose or basis. Please follow the doctor’s instructions. Do not self-diagnose and treat with this measurement result.
- The waterproof level of this product is IP68, and it cannot be used for diving / swimming or soaking in water for a long time; in addition, this product cannot be used in hot water / sauna environment, because water vapor will cause damage to the equipment.
- The company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version, which is normal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>