DVDO Camera-Ctl-1 IP Camera Control Keyboard User Manual
- June 13, 2024
- DVDO
Table of Contents
DVDO Camera-Ctl-1 IP Camera Control Keyboard
Product Description
Brief Description
This product is an Android-based network touch keyboard with a 10 1-inch
capacitive touch screen and simple user interface The integrated touch screen
can provide real-time previews from camera feeds, and the system can output
the image to an external display via HDMI It supports single viewing of H 265
4K@30fps or H 264 1080p@60fps; and 4-channel 720p@30fps The system includes a
joystick for PTZ control, and is suitable for unified control where multiple
network cameras are installed such as schools, hospitals, hotels, businesses,
etc
Features
- 10 1-inch capacitive touch screen
- Android 6 0 operating system
- H 265/H 264 decoding, up to 4 screen partitions
- Supports viewing images on the touch screen or external display via HDMI
- Network access to full range of PTZ cameras
- PTZ control, preset, cruise, track setting and recall
- Supports ONVIF protocol
- Controls up to 1024 cameras
- Supports external mouse
Keyboard Appearance
- Left side button controls: Preset, cruise, scan and other programmable functions
- Large middle screen area: 10 1-inch capacitive touch screen for operation and display
- Right-side joystick control: PTZ control joystick (left/right/up/down/zoom) and customizable shuttle dial
Keyboard Interface
No. | Name | Function |
---|---|---|
① | On/Off Switch | |
② | Power Input | Standard 5 5/2 1 Power Interface, DC 12V2A±10% |
③ | Network Interface | Network Connection |
④ | Reserved | Manufacturer use only |
--- | --- | --- |
⑤ | USB | Device upgrade control or external mouse control |
⑥ | Reserved | Manufacturer use only |
⑦ | HDMI | Synchronized external display with 10 1-inch screen |
⑧ | RS-232 | For Pelco-D / Pelco-P / Visca control |
⑨ | RS-485 | For Pelco-D / Pelco-P /Visca control |
System Diagram
System Settings
Language Setting
Select Chinese or English
Hardware Settings
Toggle key-touch sound on / off
Hardware Settings
Toggle key-touch sound on / off
Network Settings
Network settings are static / DHCP optional Please save after modification
Note : The IP address of keyboard must be the same network segment as PTZ
camera(s)
System Upgrade
Please copy the upgrade file onto a USB flash drive, then insert the flash
drive into the USB port on the back of the keyboard Select [System Update],
then select [Install] on the pop-up upgrade dialog box Once application is
installed, select [Open] Note : Do not modify the name of the upgrade file
Do not power off during upgrade process
About System
Shows software version number of system
PTZ Mode
Equipment Management
Click the pop-up menu bars at the upper right corner of the PTZ mode screen, then select [Device Management] to enter the device management interface as shown below
Note : In the PJZ control page, you can enter the last digits of the camera’s IP address directly on the keyboard and then press the [Address] button to connect the PTZ camera In this example, you may enter “239” to add the camera at 192 168 0 239; please use the actual last digits of your camera’s specific IP address.
Auto-Search
Click [Search] / [Quickly Add] to search for IP cameras, then the [Search
Results] dialog box will pop up After inputting the IP address of the device
to be added, click the + , fill in the user name and password of the
corresponding PTZ camera, then save
Add Manually
Click [Manually Add], then enter the device name, IP address, ONVIF port
number, user name, and password into the [Add Device] dialog box, then save
Delete device
Click the next to [Added Devices], then select the IP address of the device to
be deleted, then click [Delete], then click [OK]
Video Display
In [PTZ Mode], click the at the upper right corner Select [Video Display] to display a four image window Click on the screen to open the [Device Add] dialog box Double-click the IP address of the camera to display the screen.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>