DVDO-RS-2 18Gbps HDBaseT USB-C-HDMI-VM Room AV Solution User Manual

DVDO-RS-2 18Gbps HDBaseT USB-C-HDMI-VM Room AV Solution

Important Safety Instructions

1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
2.  Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
3.  To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
4.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
5.  Do not place sources of naked flames, such as lighted candles, on the unit.
6.  Clean this apparatus only with dry cloth.
7.  Unplug this apparatus during lightning storms or when unused for long periods of time.
8.  Protect the power cord from being walked on or pinched particularly at plugs.
9.  Only use attachments /accessories specified by the manufacturer.
10. Refer all servicing to qualified service personnel.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction

The wall plate is a 2×1 switcher and HDBaseT transmitter with HDMI and USB-C input. It features a US one-gang enclosure for Decora-style wall plate openings. The USB-C input provides an ideal AV interface for connecting with new Apple notebooks and Windows® PCs as well as smartphones and tablets. Supporting video resolution up to 4K@60Hz 4:4:4, the product is remotely powered by the receiver or other HDBaseT-equipped devicesvia POE.

Features

• Compliant with HDMI 2.0b, HDCP 2.2 and DisplayPort 1.2a
• Supports 18Gbps video bandwidth
• Video resolution up to 4K@60Hz 4:4:4
• HDBaseT output extends video transmission distance up to 230ft / 70m for 1080P or 131ft / 40m for 4K via a single CAT6/6a/7 cable
• Support HDR10 and HDR10+
• Supports Dolby Atmos,TrueHD, Digital+, Digital; DTS X, HD Master Audio, HD High Resolution Audio, 5.1; PCM 2-8Ch
• Supports HDMI and USB-C input
• US one-gang enclosure for Decora-style wall plate openings
• Input signal selection supports automatic mode and manual mode
•  USB 2.0 extension with receiver
• Supports POE function (only from receiver to the transmitter)
• USB-C charging port

Package Contents

• 1× 18Gbps HDBaseT 70M with USB-C/HDMI & KVM Wall Plate Transmitter
• 1× User Manual

Specifications

Product Dimensions

Operation Controls and Functions

Transmitter Panel

1. Power LED indicator will illuminate in green when the product is powered on, and red when the product is on standby.
2. HDMI LED will be on when the HDMI input port is active and the HDMI signal is detected.
3. USB-C LED will be on when the USB-C input port is active and USB-C signal is detected.
4. HDMI Port: Connect to HDMI source device.
5. USB-C Port: For USB-C signal input or charging USB-C devices.
6. CHARGE Port: Connect this port to power supply, then the USB-C port willpower the connected device.
7. USB-B Port: Connect to the computer’s USB port.
8. SOURCE Button: Used to switch HDMI / USB-C input signal.
9. HDBaseT OUT: Connect to receiver with CAT6/6a/7 cable.
10. Micro-USB: Firmware update port.

Receiver Panel

1. Power LED indicator will be on when the product is powered on.
2. DC 24V: Power supply port.
3. FW Firmware update port.
4. HDBaseT IN: Connect to transmitter with a CAT6/6a/7 cable.
5. HDMI OUT: Connect to HDMI display device.
6. HDMI IN: Connect to HDMI source device.
7. AUDIO OUT: Analog audio output port.
8. USB Port: Two USB ports for KVM function.

Note
This transmitter supports automatic/manual mode for source signal input. In manual switching mode, press the SOURCE button to select HDMI/USB-C input. In automatic switching mode, the last connected or the currently connected source signal will be selected automatically. When both HDMI and USB-C ports are connected to active signals, HDMI signal input is prioritized. When neither HDMI and USB-C ports are connected to active signals, it will switch to the receiver’s source signal.\

Application Example

Warranty Terms and Conditions

For the following cases we shall charge for the service(s) claimed for the products if the product is still remediable and the warranty becomes unenforceable or inapplicable.

1. The original serial number (specified by us) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3.  The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4.  The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5.  The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. We reserve the right for interpretation of these cases above and to make changes to them at any time without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>