Tupperware P&GC0001 Pure&Go Water Filter Bottle User Manual
- June 13, 2024
- Tupperware
Table of Contents
Tupperware P&GC0001 Pure&Go Water Filter Bottle
Product Information
The Tupperware Pure&Go Water Filter Bottle is a portablewater bottle that provides great tasting water wherever you go. It includes the following components:
- Cover: Model #P&GC0001
- Straw: Model #P&GS0002
- Filter: Model #P&GS0003
- Bottle: Model P&GB0004
The system has been tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of specific claims specified on the Performance Data Sheet.
Product Usage Instructions
- Hold the filter (c) with one hand and push the straw (b) into the valve located on top of the filter.
- Repeat the same process with the other side of the straw, inserting it into the valve located in the bottom of the cover (a).
- Pre-soak the filter in water for 15 minutes before use to activate it.
- After soaking, do not drink the filtered water. It can be used to water flowers. Fill up your bottle with water from the tap.
- Your Tupperware Pure&Go Water Filter Bottle is now ready to be used.
Note: The system performance has been tested according to NSF/ANSI 42 for the reduction of chlorine and particulate, Class I particles (0.5 to 50%) with a reduction rate of over 85%. Actual performance may vary.
The Tupperware Pure&Go Water Filter Bottle is covered by a Tupperware warranty against material or manufacturing defects that occur when using the product according to the provided directions and in normal household use. The warranty does not cover damage resulting from negligent use or misuse of the product. If your product is covered by warranty or if you no longer need your product, please recycle it responsibly or contact Tupperware for assistance. Replaceable components, such as the Pure&Go Replacement Element, can be purchased from authorized retailers listed on the Tupperware website.
Thank you for choosing Tupperware Pure&Go Water Filter Bottle, which allows you to have great tasting water with you wherever you want. Please read and follow the Use and Care instructions carefully and you will enjoy your Water Filter Bottle for many years.
Warnings
Using Instructions
- (a) Cover: Model #P&GC0001
- (b) Straw: Model #P&GS0002
- (c) Filter: Model #P&GS0003
- (d) Bottle: Model P&GB0004
System Tested and Certified by NSF International against NSF/ANSI Standard 42 for the reduction of claims specified on the Performance Data Sheet and at www.nsf.org.
Use & Care
- Clean all components before first usage.
- It is recommended to clean the Tupperware Pure&Go Water Filter Bottle once a week. The filter can be taken out and stored aside.
- All parts of the Tupperware Pure&Go Water Filter Bottle are dishwasher safe except the filter (c).
- Maximum amount of filtered water per filter: 300L or 79 ¼ gallon (depending on tap water composition).
- Maximum time of usage with one filter: 60 days. After reaching the maximum amount of water filtered and/or the maximum number of usage days, the filter has to be replaced.
- Use only treated tap water supplied by the urban districts.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Filtered water should be consumed within 24 hours. If longer than that, it should be discarded.
- If the filtered water develops an odor, please replace the filter immediately.
- The filter is designed to be used only with cold water (no syrups, carbonated soft drinks, etc).
- It is recommended to store the Tupperware Pure&Go water filter bottle away from direct sunlight and from heating elements like oven & coffee machine.
- The product is not microwave or freezer safe.
- Store the bottle and filter in a cool dry place.
- Keep it away from children.
- Product for individual use only.
First Usage and Filter Placement (see drawings)
- Hold the filter (c) with one hand and simply push the straw (b) into the valve located on top of the filter.
- Do the same with the other side of the straw with the valve located in the bottom of the cover (a).
- Pre-soak the filter in water for 15 minutes before use to activate the filter.
- After soaking, do not drink the filtered water. It can be used, however, to water flowers. Fill up your bottle with water from the tap.
- Your Tupperware Pure&Go Water Filter Bottle is now ready to be used.
Data Performance
This system has been tested according to NSF/ANSI 42 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42. While testing was performed under standard laboratory conditions, actual performance may vary.
Substance| Influent challenge concentration| Reduction
requirement
---|---|---
Chlorine| 2.0 mg/L +/- 10%| > 50%
Particulate, Class I
particles 0.5 to <1 µm
| at least 10,000 particles/ml| > 85%
The Tupperware Commitment
- Our products reflect our commitment to making a measurable impact on the world around us. At Tupperware, we design all products with minimizing plastic and food waste in mind. By creating quality, durable and reusable products, we’re supporting our mission to reduce waste for the longevity of our planet, our people and the communities we live and work in.
- Tupperware Pure&Go Water Filter Bottle is covered by a Tupperware warranty against any material or manufacturing defects that may occur when using the product according to directions and in normal household use.
- This warranty does not include replacement for damage to the product resulting from negligent use or misuse of the product. If your product is covered by warranty, please refer to the warranty terms applicable to your country for a full description of coverage.
- Your Tupperware product is meant to be used again and again. If for any reason your product is not covered by warranty or you no longer need your product, please be responsible and recycle it, or let us know if we can help you.
To purchase replaceable components such as Pure&Go Replacement Element, please locate retailers at: www.Tupperware.com
More Information
Manufacturer of Tupperware Pure &Go Water Filter Bottle:
Tupperware Products AG
- D4 Business Village Luzern, Platz 1a 6039 Root D4, Switzerland
Tupperware
- 14901 S. Orange Blossom Trail Orlando, FL 32837 USA/É.-U.
System conforms to NSF/ANSI 42 for the specific performance claims as verified and substantiated by test data.
Imported in US by: Tupperware U.S., Inc. 14901 S. Orange Blossom Trail, Orlando, FL 32837 USA/É.-U.
© 2022 Tupperware. All Rights Reserved.
References
- NSF | The Public Health and Safety Organization
- Tupperware® Official Site | Innovative Kitchen Products and More! – Tupperware US