DORNBRACHT 27 802 892-FF Tara Hand Shower Set Installation Guide
- June 13, 2024
- DORNBRACHT
Table of Contents
DORNBRACHT 27 802 892-FF Tara Hand Shower Set
Product Information
The Dornbracht Montageanleitung is a user manual for the Dornbracht product. It provides general safety instructions and guidelines for installation and operation. The manual emphasizes the importance of following the instructions to avoid property damages and ensure proper functioning. The manual also highlights the need for competent and qualified plumbers to carry out the installation according to appropriate DIN / EN directives, national regulations, and regulations of local water supply companies. It mentions specific standards such as DIN 1988, EN 1717, EN 806, TVO, etc. Before fitting the exposed trim parts and commissioning, it is recommended to flush the system. The appendix of the manual contains information about operating conditions and dimensions. In case of any questions or uncertainties regarding installation or operation, users are advised to contact the Technical Service of Dornbracht. Contact details can be found on the back of the manual or on the Dornbracht website.
Product Usage Instructions
- Read the entire user manual carefully before starting the installation or operation of the Dornbracht product.
- Ensure that all manuals and documents belonging to the product are passed on to the end user.
- Hire a competent and qualified plumber to carry out the installation according to appropriate DIN / EN directives, national regulations, and regulations of local water supply companies.
- Prioritize following local accident prevention regulations during the installation process.
- Flush the system before fitting the exposed trim parts and commissioning.
- Refer to the appendix for information about operating conditions and dimensions.
- If you have any questions or uncertainties regarding installation or operation, contact the Technical Service of Dornbracht using the contact details provided on the back of the manual or on the Dornbracht website.
General safety instructions
- Please read this manual and follow the instructions. All manuals and documents belonging to the product have to be passed on to the end user. Otherwise the producer liability may be limited in case of damage.
- All work has to be carried out by a competent and qualified plumber according to appropriate DIN / EN directives (DIN 1988, EN 1717, EN 806, TVO etc.), national regulations and regulations of the local water supply companies. Local accident prevention regulations are to be followed with priority.
- Flush before fitting the exposed trim parts and commissioning.
- Operating conditions and dimensions can be found in the appendix.
- For questions or uncertainties regarding installation or operation, please contact the
- Technical Service of Dornbracht.
- You can find relevant contact details on the back of this manual and on the website of Dornbracht: www.dornbracht.com
ATTENTION! This symbol warns of property damages due to non-compliance
with the instructions.
NOTICE! This symbol calls attention to important information.
GB Care and maintenance by the user.
Technical information.dornbracht.com
Parts supplied
INSTALLATION
DIMENSION
Operating conditions
- Cold water temperature 5 – 25 °C
- Hot water temperature 55 – 65 °C
- Recommended hot water temperature 60 °C
- Thermal disinfection (5:00 mins.) ≤ 70 °C
- Permissible flow pressure 1 – 5 bar
- Recommended flow pressure 3 bar
The customer has to provide a pressure reducer in the main line downstream of the water meter to comply with the noise levels according to the noise class at a resting pressure above 500 kPa / 73 psi / 5 bar. If combined with continuous-flow heaters, the minimum flow volume of the safety shut-off has to be considered. Observe the manufacturer‘s instructions for the continuous-flow heater.
Dornbracht AG & Co. KG
Köbbingser Mühle 6, D-58640 Iserlohn
Tel. +49 2371 8899-900
mail@dornbracht.de
www.dornbracht.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>