Tra CHE-629 Nyanboard Earphones User Manual

Tra CHE-629 Nyanboard Earphones

First Use Note

Ensure the charging case and earbuds are fully charged before you start to use.

How to Wear
Select the best fitting ear tip and then wear earphones. Make sure that it fits snugly and seamlessly inside your ear to get the best sound and Noise- Canceling performance.

Power On
Auto power on Take out the earphones from the charging case, the earphone will automatically power on.

Manual power on If the earphone is powered off, and the charging case is not available, please tap earphones touch control for 2-3 seconds in the meantime until the blue lights flash.

Power Off

•  Put the earphones into the charging case , they will enter into charging mode and power off automatically.
• If the charging case is not available, just disconnect the Bluetooth connection between your cell phone and earphones, the earphones will power off automatically after 10 minutes.

How to Connect
For the first time pairing, take the earbuds out of the case and search Bluetooth “NYANBOARD EARPHONES” on your phone, and tap to connect. ( Earbuds will auto re-connect to the last time device in connectivity records).

How to Reset
If earbuds are not working properly, follow the below steps to the Factory Setting: Put the earbuds into the case, click left and right earphones 5 times when the earphone is in charging mode, and you will see red and blue lights will flash in the same time, then take earphones out of the charging case, it will connect to each other automatically.

How to Charge
Earbuds: Put earbuds into the charging case, they will be charged automatically, the light will be on after about 5s. Charging Case: Charging the case with the included cable and your DC5V/1A adapter ( PC USB port or other DC5V also compatible). The LED blue light will show up when charging status, a long blue light when fully charged.

Functional Operation

Music
Press X1 : either earbud for Pause / Play.
Press X2: the left earbud for the previous song; the right earbud for next song.

Incoming Call
Press X1: either earbud to answer /end a call
Press X2: either earbud to reject a call.

Mode Switch
Press X3: right earbud to activate siri voice assistant.
Press X3: left earbud to switch gaming mode/normal mode

Volume adjustment
Long Press: the left earbud to reduce the volume (-); the right earbud to increase the volume (+).

Specification

What’s in the packing box?

• Charging Case 1 piece
• Wireless Earbuds 1 pair
• Manual1 piece
• USB-C Charging Cable1 piece

FAQ

• Q: Earbuds can not be charged?
  1. Ensure the charging case is fully charged, then put earbuds into the charging case to charge.

•   Dry clean the charging points as there may be dirty.
  No sound from the left or right earbud?

• Ensure two earbuds are paired successfully. You can follow the “ How to Reset” to pair the earbuds.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

RF warning statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>