DORNBRACHT 13 512 782-FF MEM Chrome Washstand Faucets Instruction Manual
- June 13, 2024
- DORNBRACHT
Table of Contents
- DORNBRACHT 13 512 782-FF MEM Chrome Washstand Faucets
- Product Information
- Contact Information
- Product Usage Instructions
- General safety instructions
- Care and maintenance by the user
- Required tools
- Parts supplied
- INSTALLATION INSTRUCTIONS
- DIMENSIONS
- Operating conditions
- CONTACT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DORNBRACHT 13 512 782-FF MEM Chrome Washstand Faucets
Product Information
The Dornbracht Montageanleitung is a user manual for various Dornbracht products. The manual provides general safety instructions, contact information for technical support, and important information regarding installation and operation.
General Safety Instructions
- Please read the manual and follow the instructions.
- All manuals and documents must be passed on to the end user to ensure full product liability.
- All plumbing work should be carried out by a competent and qualified plumber who adheres to appropriate DIN / EN directives, national regulations, and regulations of local water supply companies.
- Local accident prevention regulations should be followed with priority.
Contact Information
For any questions or uncertainties regarding installation or operation, please contact the Technical Service of Dornbracht. Contact details can be found on the back of the manual or on the Dornbracht website: www.dornbracht.com
Product Usage Instructions
The user manual does not provide specific product usage instructions. It primarily focuses on general safety instructions and contact information for technical support. For detailed usage instructions, please refer to the specific product manual corresponding to your Dornbracht product.
General safety instructions
- Please read this manual and follow the instructions. All manuals and documents belonging to the product have to be passed on to the end user. Otherwise the producer liability may be limited in case of damage.
- All work has to be carried out by a competent and qualified plumber according to appropriate DIN / EN directives (DIN 1988, EN 1717, EN 806, TVO etc.), national regulations and regulations of the local water supply companies. Local accident prevention regulations are to be followed with priority.
- Dimensions can be found at the end of the manual.
- For questions or uncertainties regarding installation or operation, please contact the Technical Service of Dornbracht.
- You can find relevant contact details on the back of this manual and on the website of Dornbracht:
ATTENTION!
- This symbol warns of property damages due to non-compliance with the instructions.
NOTICE!
- This symbol calls attention to important information.
Care and maintenance by the user
Required tools
Parts supplied
INSTALLATION INSTRUCTIONS
DIMENSIONS
Operating conditions
- Cold water temperature 5 – 25 °C
- Hot water temperature 55 – 65 °C
- Recommended hot water temperature 60 °C
- Thermal disinfection (5:00 mins.) ≤ 70 °C
- Permissible flow pressure 1 – 5 bar
- Recommended flow pressure 3 bar The customer has to provide a pressure reducer in the main line downstream of the water meter to comply with the noise levels according to the noise class at a restingpressure above 500 kPa / 73 psi / 5 bar.
- If combined with continuous-flow heaters, the minimum flow volume of the safety shut-off has to be considered.
- Observe the manufacturer‘s instructions for the continuous-flow heater.
CONTACT
- Dornbracht AG & Co. KG
- Köbbingser Mühle 6, D-58640 Iserlohn
- Tel. +49 2371 8899-900
- mail@dornbracht.de.
- www.dornbracht.com.