nordlux 2015146103 Oja 60 LED Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux 2015146103 Oja 60 LED Light
INSTALLATION
BLUETOOTH CONNECTING
- Download the Nordlux Smart Light app from the App Store or Google Play.
- Turn on the Bluetooth of your phone. Stay within 8 meters from the Nordlux Smart product.
- Open Nordlux Smart Light App and connect the Nordlux Smart product via “+” in the App.
- Control the brightness and colour temperature of Oja.
SYMBOLS
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
- The lamp is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your householdwaste disposal service or the store where you purchased this product.
- For indoor use only.
EU declaration of conformity
Simplified EU declaration of conformity
- Hereby, Nordlux declares that the radio equipment type Nordlux Smart light product is in compliance with Directive 2014/53/EU.
- The full text of the EU declaration of conformity is available at the following
- Internet address: https://nordlux.link/Smart-doc.
Simplified UK declaration of conformity
- Hereby, Nordlux declares that the radio equipment type Nordlux Smart light product is in compliance with UK RED Regulations 2017 NO.1206.
- The full text of the UK declaration of conformity is available at the following internet address: https://nordlux.link/Smart-doc.
ERP directive
- Hereby, Nordlux declares that the radio equipment type Nordlux Smart light product is in compliance with ecodesign requirements for energy-related products Directive 2009/125/EC.
Safety information
- Installation
- Don’t connect the lamp to a dimmer circuit, only controllable by Nordlux Smart Light app.
- Don’t install in a humid area,avoid contact with all sorts of liquid, clean with a dry wipe.
- Don’t set up near heat source. Don’t expose to direct sunlight.
- Reset your device
- Toggle the main switch 3 times(interval 2s)
- Smart product specifications
- Frequency band: 2400-2483.5MHz
- Input: 220-240V~50Hz
- Maximum transmitted radio-frequency power <10dBm
- Networked standby power: 0.50W
- Expand network of devices: up to 50 pcs light source
Nordlux A/S Østre Havnegade 34 DK-9000 Aalborg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>