omthing E-Joy Smart Watch Plus WOD003 User Guide

: June 5, 2024
: omthing

Table of Contents

Main features
Basic functions
Waterproof
Documents / Resources

E-Joy Smart Watch Plus WOD003
User Guide

Please read the user guide thoroughly before using this product and retain it properly for future reference.

Main features

The device supports multiple sports modes, sleep monitoring, heart rate/body temperature/blood pressure detection, message push, music control, etc, apply to various life scenes.

Charge battery
Please ensure well contact of the metal poles on both the charging dock and the device’s backside. After power on, the charge icon is shown on display.

Notes：

Please charge the device with the charging cable that comes with the device, and keep the charge pole clean and dry before / while charging.
While not charging, please unplug the charging cable, power off, and keep away from metal materials to avoid fire caused by a short circuit.

Power on/off
Power on: long-press the power button or charge to turn on automatically.
Power off: long-press the power button or swap to the “Power Off” interface and touch the icon.

Connect the watch to your phone

Download APP
Method 1: Open your WeChat and scan the QR code to download;
Method 2: Search WoFit APP on Google Play/App Store to download.
http://www.wo-smart.com/p-730.html
http://wo-smart.com/t/WoFit
Register an Account
Open the app, select “Registered Version” and register an account following the instructions. After the registration is completed, log in to the APP again.
Connect to The Phone
Turn on the watch, enable the phone’s Bluetooth, click “Search”, select the watch, and pair it. After successful pairing, follow the instructions to set up your watch preferences, then you can use the watch.

Basic operate

Power button:
Long press to power on/off;
Short press on the main page, to access to function page;
Short press on other pages, back to the main page.
Touch button：
On the home image, tap left/right/upward/downward, to switch to different function pages.
On the home page, long-press the screen to select different watch faces.

Basic functions

Function on/offsetting
Some functions will be activated from the APP setting by going to “Setting > Device > Switch Setting”. (such as body temperature detection, blood pressure automatic monitor, etc)
Body temperature detection
Body temperature detection is off by default. Once turn on this function, the device does 24/7 body temperature detection automatically and supports manual testing mode as well. Manual detection takes 5 to 10 minutes.
Blood oxygen detection
Switch to the blood oxygen interface on the device and click “Start” to test.
The test duration on the device is 1 minute. After synchronizing the data, the measurement results can be viewed on the APP.
Manual measurement of blood oxygen from the APP, the measurement time is not limited, until the test is manually exited.
Heart rate detection
Test results will not be saved by detecting heartbeats manually on the device.
Test results will not be saved by detecting heartbeats manually on the APP.
The device will monitor heart rate 24/7 automatically once activate the automatic heart rate detection mode on the APP. Monitor data can be seen after synchronization.
Message push
If a message shows on your cellphone, the device will inform you with vibration.

Notification reminder is working when the device is well connected to your cellphone.
Please activate the notication reminder on your cellphone.
Please turn on the notification reminder function on APP, “Setting” > ”Device” > ”Notification”.

Sleep monitoring
Sleep monitoring is on by default. The user could switch to the sleep monitoring page on the device, to check the total sleeping duration or check sleep data in detail on the APP, it doesn’t support noon nap detection and abnormal sleeping time (such as night work shift, or sleep in the day).
Multiple sports modes
You could tap the screen to access the sports page, and select your preferred sports modes to start your exercise.
Music control
The device supports music control functions, e.g., previous/next song, play/pause, and adjust the volume.
Time setting
Device time sync to cellphone’s time. On your cellphone setting, find the time setting, you could select 24/12 time mode, reconnect APP, and refresh the APP to sync.
Unit setting
If you want to modify the height and weight unit, please start APP, find “Setting” > “Unit”, to select the format.
Lock screen
Once the device turns on the lock screen function, please long-press the power button to unlock.
Self-define watch home screen
Device support self-define watch home screen, besides some scheme on watch, you could select your image from your phone to set as your own watch home screen.

Waterproof

The device is IP68 rated waterproof, the waterproof function is working and has been tested by the factory under specific conditions.
The waterproof level is lower along with time.
Could use on occasions: Wash hands, on a rainy day, play with water in the shallow water area, DO NOT wear the device while taking a hot shower, diving, surfing etc.
It is beyond warranty scope if damage causes by the liquid inside.
Notes: Below occasions might affect the device’s waterproof, please beware.
1. Device fall down, get hit, knock other things.
2. Device has soap water, shower gel, detergent, perfume, lotion, oil, etc.
3. Taking a hot shower, spa, this kind of high temperature/moisture occasion.

Cautions

For Android 6.0.1 or above, need to turn on GPS location permission, they could show the Bluetooth device name on the Bluetooth list. Set up from phone’s setting > location (Different phones possibly is with a different path to find)
For i0S13 or above, if fail to receive a notification after turning on the notification reminder, it’s suggested to set up from iphone settings > Bluetooth > device name, click the icon, to turn on “share system notifications”.
When monitoring heart rate, you need to attach the photoelectric sensor on the back of the device to your wrist to keep it comfortable If you wear it too loose or too tight it will affect the test data.
It shows the skin temperature in the wearing position, the showed skin temperature data is related to the environment and clothing, could not indicate deep skin temperature, the data is not used for diagnosis or medical purposes. Valid detecting temperature scope: 0°C-50°C, that is, 32°F-122°
The device is not a medical device, the data is just for personal reference.
On the device screen, you could find the basic data on different function pages, and sync it to the APP for showing more details. ( Device keeps the data for 7 days due to limited memory, to avoid losing data, it’s suggested to connect to APP every day.)
Swipe down on the home screen and then swipe left, (Press the power key on the home screen to enter the main menu, then swipe left), tap to check more information.

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CE
Hereby, Tiinlab Corporation declares that the radio equipment type WOD003 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.omthing.com
EU regulatory conformance
RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
Operation temperature: 0~45℃
Operation frequency(Max power)
Bluetooth: 2402-2480 (0.4dBm)

Manufacturer: Twinlab Corporation
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City,
Nanshan District, Shenzhen, China

www.omthing.com

Manufacturer: Twinlab Corporation
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
FCC ID: 2ASDIWOD003 CCAH21LP4920T2