KROSS STUDIO DCWWT22 Wonder Woman Tourbillon User Manual

KROSS STUDIO DCWWT22 Wonder Woman Tourbillon

Product Information

Specifications

• Parts: 283
• Limited Edition Unique Piece
• Movement: Caliber KS 7’001
• Functions: Manual-winding central tourbillon
• Parts: 205
• Jewels: 27
• Power Reserve: 5 days
• Frequency: 21’600 bph / 3 Hz
• Case Materials: Grade 5 titanium protected by a black DLC treatment
• Dome-shaped anti-reflective sapphire crystal
• Diameter: 45 mm
• Thickness: 20 mm
• Thickness without crystal: 12.5 mm
• Case back Materials: Grade 5 titanium 4 anti-reflective sapphire crystals
• D-ring crown

Product Usage Instructions

• Movement Winding
  The manual-winding mechanical movement developed in-house delivers a 5-day power reserve. To wind your watch, lift the D-ring crown and turn it counterclockwise until you feel resistance. Repeat this process 23 times for full winding.

• Time Setting
  To set the time, press the Time Set push button. Lift the D-ring crown on the case-back and turn clockwise until the exact time is set. If you encounter resistance, turn the D-ring crown counterclockwise briefly before adjusting clockwise to ensure proper functioning.

• Buckle Opening
  To open the buckle, press simultaneously on the two push buttons located on the sides of the clasp.

• Buckle Release
  To detach the buckle, pull the lever located under the clasp. When fixing the buckle, insert one side onto the spring bar, then pull the lever to insert the other side. Ensure the spring bar is secure by pulling on the strap.

FAQ

• How often should I wind my watch?
  It is recommended to wind your watch when the power reserve runs out, typically every 5 days for this model.

• Can I change the straps on my Wonder Woman Tourbillon?
  Yes, the Wonder Woman Tourbillon comes with interchangeable straps including a blue calf leather strap and a black rubber strap, both reinforced with black rubber inlay for durability and comfort.

Overview

FRONT

1. Case

2. Dial

3. Hour hand

4. Minute hand

5. Tourbillon cage
   BACK

6. Time set push button

7. D-ring crown

8. Strap release push buttons “Push to release”

MOVEMENT WINDING

• The manual-winding mechanical movement developed in-house delivers a 5-day power reserve. After this period, you must wind your watch to provide the necessary energy for it to run.
• In order to maintain perfect symmetry, the “Wonder Woman Tourbillon” case has no traditional crown. On the case back, a D-ring crown is stowed out of sight to help maintain the timepiece’s sleek, space-age styling. This mechanism enables faster winding than with a traditional crown.
• To wind your watch, lift the D-ring crown and turn it counterclockwise until you feel some resistance, meaning that the watch has been wound.
• To fully wind your watch, 23 complete turns are needed.

TIME SETTING

• The hours and minutes are displayed in a unique peripheral format, made possible by a planetary gear system that orbits 360° around the tourbillon.
• To set the time, press the “Time Set” push button. Lift the D-ring crown – located on the case-back – synchronously and turn clockwise until the exact time is set. When setting the time, there may be some resistance as the watch will be wound simultaneously.
• Note: You might turn the D-ring crown counterclockwise. In this case, go back 10 minutes before the actual time. Then, turn it clockwise until adjusting the exact time. It enables the gear train to go back to its functioning position.

BUCKLE OPENING

• Press simultaneously the two push buttons located on the sides of the clasp to open the buckle

BUCKLE RELEASE

• To detach the buckle, no tools are required. Simply pull the lever located under the clasp and it will release the strap.
• To fix the buckle, start by inserting the right side of the buckle on the spring bar. Pull the lever and insert the left side.
• Make sure the spring bar is securely in place by pulling few times the strap.

TECHNICAL SPECIFICATIONS

WONDER WOMAN TOURBILLON

• Parts 283
• Limited Edition Unique Piece

Mouvement

• Caliber KS 7’001
• Fonctions Manual-winding central tourbillon
• Parts 205
• Jewels 27
• Power Reserve 5 days
• Frequency 21’600 bph/3 Hz
• Case
• Materials
  • Grade 5 titanium protected by a black DLC treatment
  • Dome-shaped anti-reflective sapphire crystal
• Water resistance 30 mètres ou 3 ATM
• Diameter 45 mm
• Thickness 20 mm
• Thickness without crystal 12.5 mm
• Case back

Materials

• Grade 5 titanium
• 4 anti-reflective sapphire crystals
• D-ring crown

INTERCHANGEABLE STRAPS

1. Blue calf leather strap, black stitching
   All straps are reinforced with a black rubber inlay for optimal durability and comfort

2. Black rubber strap, black stitching
   Black DLC grade 5 titanium clasp.

www.kross-studio.com.

References

• Home | Kross Studio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>