Kanlux 31410 Dicht LED Instruction Manual
- June 13, 2024
- Kanlux
Table of Contents
DICHT LED
2022/11-1
Czech Republic
31410 Dicht LED
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Mounting diagram:
see pictures.
Check for proper mechanical fastening and connection to electrical power prior
to first use. The product can be connected to a supply network which meets
energy quality standards as prescribed by law. To maintain the proper IP
protection level, the right diameter of the power cable should be selected for
the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used either indoors or outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the
product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature.
ATTENTION! Do not look directly at LED light beam. Product can only be
supplied by rated voltage or voltage within the range provided. It’s forbidden
to use the product with damaged protective cover. Product must not be used in
unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air
atmosphere, fumes, or chemical fumes, etc.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Rated power.
P3: Rated luminous flux. The specified luminous flux refers to the light source
(LED module) used.
P4: Rated luminous flux.
P5: Rated durability.
P6: Colour Rendering Index.
P7: Colour temperature.
P8: The product can only be used in a lighting fixture with protective glass.
P9: The chipped globe, screen or protective shield must be replaced
immediately.
P10: Class II. A product in which protection against electric shock is
provided not only through basic insulation, but also double or reinforced
insulation.
P11: Dust-proof product.
P12: Protection against water jets provided.
P13: Caution, risk of electric shock.
P14: Product can be used either indoors or outdoors.
P15: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P16: The product is not compatible with lighting dimmers.
P17: Product meets the requirements of EU directives.
P18: Environmental operating temperature range that the product can be exposed
to
P19: The product is compliant with all relevant United Kingdom regulations.
P20: This product is equipped with a light source with energy efficiency class E
P21: The LED light source can only be replaced by qualified personnel (Kanlux
service only).
P22: Any control panel or control equipment can only be replaced by qualified
personnel (Kanlux service only).
P23: Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P24: The product meets the requirements of technical regulations applicable in
Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P25: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising. Products labelled in this way should
be returned to a collection facility for waste electrical and electronic
goods. Information on collection centres is provided by local authorities or
sellers of such goods. Used items can also be returned to the seller when new
product is purchased, in quantity no larger than the purchased item of the
same type. The above rules regard the EU area. In the case of other countries,
regulations in force in a given country must be applied. Contacting the
distributor of our products in a given area is recommended.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Miledo products visit www.kanlux.com. Aprisa s.r.o. shall
not be responsible for any damage resulting from the failure to follow these
instructions. Aprisa s.r.o. reserves the right to make changes in the manual –
the current version can be downloaded at
www.kanlux.com.
