Schneider LVS04560 Linergya Engaged User Guide
- June 13, 2024
- Schneider
Table of Contents
Schneider LVS04560 Linergya Engaged
Product Information
The Linergy LGYE series consists of three different models: LVS04620, LVS04621, and LVS04623. These products are electrical equipment manufactured by Schneider Electric and are subject to IEC 61439-1 & 2 certification. They are designed to be used in PrismaSeT switchboards and come with specific mounting instructions.
Product Usage Instructions
Installation
- Only qualified personnel should install, operate, service, and maintain the Linergy LGYE series.
- For mounting Linergy LGYE, use the screws and stud plate provided. Do not use Linergy screws instead of the stud plates.
- All connections must be tightened to the correct torque as indicated in the instructions.
- The joint screen kit for the neutral conductor (reference LVS04624) must be mounted between the Linergy LGYE 3P+N neutral bar and the frame to maintain isolation.
Switchboard Compatibility
The Linergy LGYE series is specifically designed to be used in PrismaSeT
switchboards. It should not be fitted in any other switchboard unless
explicitly stated in the instructions.
Safety Precautions
Failure to follow the installation instructions may result in electric shock,
explosion, or arc flash, leading to death or serious injury. Therefore, it is
essential to strictly adhere to the provided guidelines.
Technical Specifications
The technical specifications for each model in the Linergy LGYE series are as follows:
- LVS04620: 3P = x3, 4P = x4
- LVS04621: L3, 1, A LVS04620, 1, L3 L2, 2, L3 L2 L1, 3, L3, L2 L1
- LVS04623: A’ LVS04621, 2, 1, LVS04565 / LVS04566, 4, 0 mm, 9 mm
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- For Linergy LGYE mountings:
- Only use the screws and stud plate supplied
- Do not use the Linergy screws instead of the stud plates.
- All connections must be tightened to the correct torque (as shown).
- Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
The joint screen kit for the neutral conductor (reference LVS04624) must be
mounted between the Linergy LGYE 3P+N neutral bar and the frame to maintain
isolation. Failure to follow these instructions
will result in death or serious injury.
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk