Schneider LVS04024 Linergy FM User Guide
- June 13, 2024
- Schneider
Table of Contents
Schneider LVS04024 Linergy FM
Product Information
- Product Name: Energy FM
- Model Number: LVS04024
- Languages: English, French, Spanish, German, Italian, Portuguese, Chinese, Russian
- Certification: Compliant with IEC 61439-1 & 2 standards
- Manufacturer: Schneider Electric Industries SAS
- Manufacturer’s Address: 35, rue Joseph Monier, 92500
- Rueil-Malmaison, France
- Manufacturer’s Website: www.se.com
Product Usage Instructions
- This product should only be installed, operated, serviced, and maintained by qualified personnel.
- The instructions provided in this document describe how to fit the Linergy FM product in a PrismaSeT switchboard.
- The installer is fully responsible if the product is fitted in any other switchboard.
- For specific installation instructions and torque requirements, refer to the model numbers mentioned below:
- LVS04012 / LVS04013 / LVS04014 / LVS04018: Torque requirement – 5.2 N.m (x4)
- LVS04052 / LVS04053 / LVS04054 / LVS04055 / LVS04192: Torque requirement – 5.2 N.m (x4)
- LVS03001: Torque requirement – 5.2 N.m (x2)
- For any further information or confirmation about the product, please contact Schneider Electric Limited at the following address:
- Address: Stafford Park 5, Telford, TF3 3BL, United Kingdom
- Website: www.se.com/uk
Note: As standards, specifications, and designs may change over time, it is advised to seek confirmation of the information provided in this publication. This document has been printed on ecological paper. Please adhere to all safety instructions and guidelines provided by the manufacturer.
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel. No responsibility is assumed by Schneider
Electric for any consequences arising out of the use of this material.
PrismaSeT switchboards equipped with. the Linergy busbar connection system and
Schneider Electric switchgear are subject to IEC 61439-1 & 2 certification.
The instructions in this document
describe how to fit Linergy in a PrismaSeT switchboard. The installer is fully
liable if it is fitted in any other switchboard.
Schneider Electric Industries SAS
35, rue Joseph Monier
92500 Rueil-Malmaison
France
www.se.com
As standards, specifications, and designs change from time to time, please ask
for confirmation of the information given in this publication.
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>