SCANGRIP UV-EXTREME Powerful UV Curing Lights Instruction Manual
- June 13, 2024
- SCANGRIP
Table of Contents
SCANGRIP UV-EXTREME Powerful UV Curing Lights Instruction Manual
-
UV LED
-
@10cm distance
Min. irradiance: >80mW/cm²
Center irradiance: 395mW/cm² -
@40cm distance
Min. irradiance: >6mW/cm²
Center irradiance: 35mW/cm² -
@60cm distance
Min. irradiance: >6mW/cm²
Center irradiance: 16mW/cm² -
Curing area:
380cm² @10cm distance
6300cm² @40cm distance
7000cm² @60cm distance -
UV peak wavelength 395 nm
-
1m
-
5m 2×1.0 mm2 H05RN-F
-
-10o to +40o C
-
220-240V AC 50 Hz
-
278x241x160mm
-
4.95 kg
-
IP30
-
IK07
-
300W
WARNING
- Only for professional use.
- Highly efficient LED light for UV curing. For indoor use only.
- Always respect applicable legislation for working with electrical equipment to reduce the risk of accidents.
- Do not use the lamp near a naked flame.
- Protect the mains cable from oil, heat, and sharp edges.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the lamp shall be destroyed.
- Disconnect lamp from mains power when not in use.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
WARNING
Appearance and properties of certain materials are degraded by exposure to UV.
CAUTION – RISK GROUP 3
WARNING UV emitted from this product.
Avoid eye and skin exposure to unshielded product.
RISK GROUP 3
WARNING – Risk of fire
Minimum distance from lighted objects 0.5m (from flammable surfaces)
Overview
USE
- Press and hold the power button (A) for 2 seconds to start curing. The curing will stop after the chosen time.
- When the curing is on, press the power button (A) to stop curing.
- Press the + or – button (C) to increase or decrease the curing time. The timer LEDs will display the currently selected curing time.
- When curing, the timer LEDs will flash and display the time remaining.
- The Bluetooth LED (D) will be on when the lamp is powered.
- Press and hold both + and – (C) for 10 seconds to reset the Bluetooth PIN code. All timer LEDs (B) will flash 3 times when PIN code is reset.
- The UV-EXTREME and UV-EXTREME PLUS are compatible with the Scangrip smartphone app for Android and iOS.
- When the chosen curing time has expired, the product will power off automatically
Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling
DESIGNED BY SCANGRIP IN DENMARK
// SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>