ASUS E1600WK All In One PC User Guide

E20075
Revised Edition V2 / March 2022

ASUS All-in-One PC

Quick Start Guide

E1600WK/E1600WKA

Front view

NOTE: The illustrations in this section are for reference only. The appearance of your ASUS All-in-One PC may vary depending on model.

1. Camera indicator*
2. Camera*
3. Array microphones*
4. LCD display panel

• On selected models

Right view

1. Power indicator
2. Power button
3. Volume increase button
4. Volume decrease button
5. Turn off display
6. Memory card reader
7. USB 3.2 Gen 1 port
8. Headphone/Headset/Microphone jack

Rear view

1. Audio speakers
2. Power input
3. LAN port
4. USB 3.2 Gen 1 port
5. USB 3.2 Gen 1 Type-C® port
6. HDMI output port
7. Serial port (COM port)
8. Kensington® security slot

Connecting a wired keyboard and mouse

NOTE: Illustrations of keyboard, mouse, and power supply are for reference only. Actual product specifications may vary by territory.

Connecting the wireless keyboard and mouse

Powering on the system

Notices

Simplified EU Declaration of Conformity

Simplified EU Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/

The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for countries listed in the table below:

AT

| BE| BG| CZ| DK| EE| FR
---|---|---|---|---|---|---
DE| IS| IE| IT| EL| ES|

CY

LV

| LI| LT| LU| HU| MT| NL
NO| PL| PT| RO| SI| SK|

TR

FI

| SE| CH| HR|

UK(NI)

| |

Simplified UKCA Declaration of Conformity

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/

The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for the country listed below:

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.

FCC Radio Frequency (RF) Exposure Caution Statement

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

RF Exposure information (SAR)

This device meets the EU requirements (2014/53/EU) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP).

For next-to-body operation, this device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 50566 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the highest certified output power level in all frequency bands of the mobile device.

A minimum separation distance of 1 cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe.

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.

The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.

Radiation Exposure Statement

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when operated in portable exposure conditions.

Caution

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.

(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Compliance Statement of Innovation, Science and Economic Development

Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-­5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Coating Notice

IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located.

Prevention of Hearing Loss

To prevent possible hearing damage, do not listen at high volume levels for long periods.

– By means of a power cord connected to a socket-outlet with earthing connection.

– Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

– Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

– A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into grounded (earthed) electrical outlet that is easily accessible at all times.

NO DISASSEMBLY

The warranty does not apply to the products that have been disassembled by users

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

No Exposure to Liquids

DO NOT expose to or use near liquids, rain, or moisture. This product is not waterproof or oil-proof.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

Declaration of Compliance for Product Environmental Regulation

ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements.

Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with.

EU REACH and Article 33

Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

EU RoHS

This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35.

Japan JIS-C-0950 Material Declarations

Information on Japan RoHS (JIS-C-0950) chemical disclosures is available on http://csr.asus.com/english/article.aspx?id=19.

India RoHS

This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS

ASUS products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Ecodesign Directive

European Union announced a framework for the setting of ecodesign requirements for energy-related products (2009/125/EC). Specific Implementing Measures are aimed at improving environmental performance of specific products or across multiple product types. ASUS provides product information on the CSR website. Further information could be found at https://csr.asus.com/english/article.aspx?id=1555.

ENERGY STAR Qualified Product

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor is automatically set to sleep within 10 minutes of user inactivity; the computer is automatically set to sleep within 30 minutes of user inactivity. To wake your computer, click the mouse, press any key on the keyboard, or press the power button.

Please visit http://www.energystar.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit http://www.energystar.gov for detail information on the ENERGY STAR joint program.

NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.

EPEAT Registered Products

The public disclosure of key environmental information for ASUS EPEAT (Electronic Product Environmental Assessment Tool) registered products is available at https://csr.asus.com/english/article.aspx?id=41. More information about EPEAT program and purchase guidance can be found at www.epeat.net.

SERVICE AND SUPPORT

Visit our multi-language web site at
https://www.asus.com/support

FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077

Responsible Party:  Asus Computer International
Address:                  48720 Kato Rd., Fremont, CA 94538
Phone/Fax No:     (510)739-3777/(510)608-4555

hereby declares that the product

Product Name :    ASUS All-in-One PC/ASUS ExpertCenter
Model Number :  E1600WK, E1600WKA

compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ver. 180620

CE RED RF Output table (Directive 2014/53/EU)

E1600WK

Model: RTL8821CE

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

18 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

Bluetooth

| 2402-2480 MHz|

7 dBm

Model: RTL8822CE

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

Bluetooth

| 2402-2480 MHz|

8 dBm

Model: Intel 9462NGW

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

5725-5850 MHz

| 12 dBm
Bluetooth| 2402-2480 MHz|

13 dBm

Model: Intel 9560NGW

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

5725-5850 MHz

| 12 dBm
Bluetooth| 2402-2480 MHz|

13 dBm

For the standard EN 300 440, the device operates in 5725-5875 MHz, it will be considered as a receiver category 2.

UKCA RF Output table

(The Radio Equipment Regulations 2017)

E1600WK

Model: RTL8821CE

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

18 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

Bluetooth

| 2402-2480 MHz|

7 dBm

Model: RTL8822CE

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

Bluetooth

| 2402-2480 MHz|

8 dBm

Model: Intel 9462NGW

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

5725-5850 MHz

| 12 dBm
Bluetooth| 2402-2480 MHz|

13 dBm

Model: Intel 9560NGW

Function

| Frequency| Maximum Output Power (EIRP)
---|---|---
WiFi| 2412-2472 MHz|

19 dBm

5150-5350 MHz

| 21 dBm
5470-5725 MHz|

21 dBm

5725-5850 MHz

| 12 dBm
Bluetooth| 2402-2480 MHz|

13 dBm

For the standard EN 300 440, the device operates in 5725-5875 MHz, it will be considered as a receiver category 2.

References

• Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
• Homepage | ENERGY STAR
• Official Support | ASUS Global
• Official Support | ASUS Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>