ASUS ROG Strix LC RGB Series Liquid CPU Cooler User Guide
- June 4, 2024
- Asus
Table of Contents
ROG Strix LC RGB Series Liquid CPU Cooler
Quick Start Guide
Package contents
- The Intel Mounting bracket comes pre-installed on the AIO Cooler.
- *The amount of these packaged items may vary between models.
Installing the AIO cooler
The illustrations in this section are for reference only, but the installation steps remain the same.
-
Prepare the motherboard and AIO Cooler. The steps may vary between Intel and AMD motherboards.
For Intel motherboards
Skip steps A and B for LGA 20XX sockets.
A. Slide the Intel backplate pins according to the CPU socket of your motherboard.
B. Attach the Intel backplate to the bottom of the motherboard.
C. Install the standoff screws onto your motherboard. Ensure to use
the correct standoff screws for your CPU socket.
For AMD motherboards
Skip steps C and D for TR4 sockets.
A. Remove the pre-installed Intel Mounting Bracket by slightly rotating the bracket counterclockwise.
B. Install the AMD Mounting Bracket onto the AIO cooler by rotating
the bracket clockwise.
The mounting bracket for TR4 socket is bundled with the TR4 CPU package.
C. Remove the four (4) screws from the pre-installed AMD heatsink mount, then remove the heatsink mount.
D. Install the AMD standoff screws onto your motherboard.
-
Install the fans onto the radiators, then install the fan and radiator combo to your PC chassis.
Ensure to use the washers when installing the fan and radiator combo to your PC chassis.
-
Connect the bundled addressable cable to the addressable RGB connector on your motherboard and installed RGB fans (or peripheral addressable RGB devices). Then connect the bundled fan cable to the fan connectors on your installed RGB fans and your motherboard.
-
Align the AIO cooler with the standoff screws installed previously, then secure it with four (4) thumbscrew caps.
-
Connect the Micro USB cable to the AIO cooler’s Micro USB port, then connect the other end to a 9-pin USB 2.0 connector on your motherboard.
-
Connect the AIO Cooler connector to the 4-pin AIO_PUMP or CPU_FAN connector on your motherboard.
Download control software
Please visit the product support page at http://www.asus.com to download and
install the control software.