audio-technica ES925C6-FM5 Cardioid Condenser Modular Gooseneck Microphone User Manual

audio-technica ES925C6-FM5 Cardioid Condenser Modular Gooseneck

Microphone

Product Information

• Product Name: ES925C6/FM5, ES925C12/FM5, ES925C15/FM5, ES925C18/FM5, ES925C21/FM5, ES925C24/FM5
• User Manual: Included
• Product Type: Cardioid Condenser Modular Gooseneck Microphone
• Power Module: 5-Pin Flush-Mount Power Module

Product Usage Instructions

1. Read the user manual carefully before using the product.
2. Ensure that the silicone part is not removed.
3. Observe all safety precautions mentioned in the manual while using the product.
4. Place the product in a suitable environment, avoiding hot, humid, or dusty areas.
5. Assemble the product according to the provided assembly instructions.
6. Familiarize yourself with the switch settings and functions mentioned in the manual.
7. Wire the product following the wiring diagram provided in the manual.
8. Refer to the specifications section for information on the product’s element, polar pattern, frequency response, sensitivity, impedance, and other technical details.
9. Make sure to provide the required phantom power within the specified range (22 – 52 V DC, 7.6 mA).
10. Take note of the contact closure specifications, including closure input voltage, maximum permissible power, and on-resistance.
11. Understand the LED control specifications, including active low voltage and maximum permissible input power.
12. Consider the weight and dimensions of the product for proper handling and installation.
13. Use the included accessories such as isolator, nut, and windscreen (AT8109a) as needed.

User Manual
CARDIOID CONDENSER MODULAR GOOSENECK MICROPHONE WITH 5-PIN FLUSH-MOUNT POWER MODULE

Introduction

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference

Features

• Modular microphone system comprised of an ES Series capsule, gooseneck assembly, and power module.
• RGB LEDs built into both the flush-mount power module and gooseneck assembly indicate the on/off status of the microphone.
• Includes external control function for device control from the capacitive touch switch.

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

Cautions for the product

• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.

Notes on use

• Check the strength of the mounting area. Insufficient strength or poor mounting will cause objects to fall or become damaged.
• The circuitry in the microphone takes about 30 seconds to stabilize after power is supplied. You may hear some audio disturbance during startup.
• Install the microphone on a flat, unobstructed mounting surface.
• Depending on the surface finish of a table, the isolators may leave marks on the table.
• Do not excessively bend the gooseneck assembly, rotate the ends of the capsule, or pull on them. Doing so may cause disconnection or malfunction.
• The product is a modular system comprised of a microphone element, gooseneck assembly and power module. Make sure the parts are firmly attached before use.
• Do not remove the rubber O-ring on the power module connecting part at the lower section of the gooseneck assembly.
• When attaching parts, remove the black cap on the capsule connecting part of the gooseneck assembly. Do not remove the silicone part at the end of the capsule connecting part

Assembly

• Insert the gooseneck assembly (c) while rotating it into the flush-mount power module (d).
• Tighten until it does not rotate, and use the hex wrench (i) to tighten the set screw (h) and set the gooseneck assembly in place.
• Connect the capsule (b) to the gooseneck assembly, and attach the windscreen (a).
• If the parts are not sufficiently tightened together, problems may occur such as the LED colors of the gooseneck assembly and power module not matching or sound is not output.
• Refer to the LED table to the right and set the LED color before attaching to the mounting surface.
• If you are installing the flush-mount power module on a table without the isolators, you must make a hole with a diameter of 20.5 mm in the mounting surface.
• If you are installing with the isolators, the hole must have a diameter of 23.5 mm. Inserting the isolators between the mounting surface and the power module allows you to separate the flush-mount power module from the mounting surface.
• Attach the upper part isolator (e) to the mounting surface, and attach the flush mount power module (d). Attach the lower isolator (f) to the reverse side of the mounting surface, and then tighten the nut (g).

Switch settings and functions

LED color

Wiring

Specifications

ES925Cx/FM5 x = 6/12/15/18/21/24

• Element: Fixed-charge back plate, permanently polarized condense

• Polar pattern: Cardioid

• Frequency: response 30 – 20,000 Hz

• Open circuit sensitivity: -40 dB (10.0 mV) (0dB=1V/Pa, 1kHz)

• Impedance: 130 ohms

• Maximum input sound level: 140 dB SPL (1kHz at 1% THD)

• Dynamic range: 112 dB (1kHz at Max SPL)

• Phantom power requirements: 22 – 52 V DC, 7.6 mA

• Contact Closure

• Closure input voltage: -0.5 – 5.5 V

• Maximum permissible: 200 mW
  power

• On-resistance: 100 ohms

• LED control: Active high (+5 V DC) TTL compatible

• Active low voltage: 1.2 V or lower

• Maximum permissible: -0.5 – 5.5 V

• Maximum permissible power: 200 mW

• Weight

• ES925C6/FM5: 109 g (3.8 oz)

• ES925C12/FM5: 133 g (4.7 oz)

• ES925C15/FM5: 138 g (4.9 oz)

• ES925C18/FM5: 143 g (5.0 oz)

• ES925C21/FM5: 148 g (5.2 oz)

• ES925C24/FM5: 153 g (5.4 oz)

• Dimensions

• ES925C6/FM5: 207.6 mm (8.2“) x 38 mm (1.5“) x 48 mm (1.9“)

• ES925C12/FM5: 315 mm (12.4“) x 38 mm (1.5“) x 48 mm (1.9“)

• ES925C15/FM5: 391.2 mm (15.4“) x 38 mm (1.5“) x 48 mm (1.9“)

• ES925C18/FM5: 467.4 mm (18.4“) x 38 mm (1.5“) x 48 mm (1.9“)

• ES925C21/FM5: 543.6 mm (21.4“) x 38 mm (1.5“) x 48 mm (1.9“)

• ES925C24/FM5: 619.8 mm (24.4“) x 38 mm (1.5“) x 48 mm (1.9“) (H×W×D)

• Output connector: 5-Pin XLRM-type

• Optional interchangeable elements: ESE-Ha (100°), ESE-Oa (360°), ESE-MLa (90°)

• Included accessories

  • Isolator 1 pair, Nut, Windscreen AT8109a,
  • Set screw (M2×2 mm (0.08“)) 2 pcs., Hex wrench (0.89 mm (0.04“))

Polar pattern

Frequency response

Dimensions

Audio-Technica Corporation

• 2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Japan
• ©2020 Audio-Technica Corporation
• Global Support Contact: www.at-globalsupport.com
• Made in Japan

References

• Global Support｜Audio-Technica Corporation オーディオテクニカ
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>