Nordlux 2210636103 Oja 42 LED Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
2210636103 Oja 42 LED Light
Instruction Manual
2210636103 Oja 42 LED Light
Removal Of Light Source
-
Lift the frame from the housing by levering the housing slightly outwards with a screw driver.
-
Remove the frame from the housing.
-
Remove the diffuser and light guide plate.
-
Unplug the light sources from the housing.
Light source
IP5X
IP5X: Dust is prevented from entering the lamp in amounts that can cause
damage to the function/safety of the lamp.
IPX4
IPX4: Raindrops falling from any angle will not affect the function/safety
of the lamp.
Class II: The lamp is double-insulated and does not need to be connected to
the yellow/green earth wire.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting
installation work. In some countries electrical installation work may only be
carried out by a authorized electrical contractor. (*)
Contact your local electricity authority for advice.The light source of this
luminaire is not replaceable; when the light source reaches its end of life
the whole luminaire shall be replaced.
**** Disposal of waste equipment by users in private households in the
European Union. This symbol indicates that this product must not be disposed
of with your other household waste. Electrical and electronic equipment
contain substances which may cause damage to human health and environment if
not recycled correctly. It is your responsibility to hand over to a designated
collection point for recycling of waste electrical and electronic equipment.
When handing over for correct recycling you help to prevent these products
straining nature and environment unnecessarily and to protect human health.
For more information regarding correct disposal, please contact your local
city office, your household waste disposal service or the store where you
purchased this product.
For indoor use only.
General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth
to gently remove grease or similar stains. Never used any detergents or
chemical reagents. Do not switch on the lamp before all the water has
evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed
manually. Because of this unique process, Care instructions: Use a soft, dry
cloth to wipe off dust cloth, and for removing grease or similar stains a
soft, moistened cloth. Do not use detergents or chemical reagents. Only light
the lamp when all the water has evaporated. Applies in particular mouth-blown
glass: Mouth-blown glass is shaped by hand.
Due to the unique manufacturing process, air bubbles may appear in the glass
and glass thickness may vary. These are the manufacturing process natural
consequences that give mouth-blown glass a certain character and natural
appearance. Clean the outhpiece
air bubbles may occur in the glass, just as the thickness of the glass may
vary. This is to be seen as a natural consequence of the manual process and is
what gives mouth-blown glass its character and organic look. Always clean
mouth-blown glass when the glass is cold.
This product contains light sources of energy efficiency class
www.nordlux.com
Nordlux A/S – @stre Havnegade 34 – DK-9000 Aalborg OJA IP54
Item N°: 2210636101 | 2210636103
Documents / Resources
|
Nordlux 2210636103 Oja 42 LED
Light
[pdf] Instruction Manual
2210636103 Oja 42 LED Light, 2210636103, Oja 42 LED Light, 42 LED Light, LED
Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>