nordlux OJA IP54 42 LED Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux OJA IP54 42 LED Light
Installation Instructions
Removal Of Light Source
- Lift the frame from the housing by levering the housing slightly outwards with a screw driver.
- Remove the frame from the housing.
- Remove the diffuser and light guide plate.
- Unplug the light sources from the housing.
Light source
Safety Symbols
IP5X: Dust is prevented from entering the lamp in amounts that can cause
damage to the function/safety of the lamp.
IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
Class II: The lamp is double-insulated and does not need to be connected to
the yellow/green earth wire.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting
installation work. In some countries electrical installation work may only be
carried out by a authorized electrical contractor. (*)
Contact your local electricity authority for advice. The light source of this
luminaire is not replaceable; when the light source reaches its end of life
the whole luminaire shall be replaced.
Disposal of waste equipment by users in private households in the European
Union. This symbol indicates that this product must not be disposed of with
your other household waste. Electrical and electronic equipment contain
substances which may cause damage to human health and environment if not
recycled correctly. It is your responsibility to hand over to a designated
collection point for recycling of waste electrical and electronic equipment.
When handing over for correct recycling you help to prevent these products
straining nature and environment unnecessarily and to protect human health.
For more information regarding correct disposal, please contact your local
city office, your household waste disposal service or the store where you
purchased this product
For indoor use only
General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth
to gently remove grease or similar stains. Never use any detergents or
chemical reagents. Do not switch on the lamp before all the water has
evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed
manually. Because of this unique process,
This product contains light sources of energy efficiency class
Customers Support
www.noediux.com
Nordlux A/S · Østre Havnegade 34 · DK-9000 Aalborg
