Kanlux 33174 BLINGO IPRN38W 6060NW Panel LED User Manual

June 13, 2024
Kanlux

Kanlux 33174 BLINGO IPRN38W 6060NW Panel LED User ManualBLINGO IPRN38W
6060NW Panel LED

www.kanlux.com

INTENDED USE / APPLICATION

Product for lighting office spaces and for general use.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution.
Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law.

FUNCTIONAL CHARACTERISTICS

Product for indoor use.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths.
Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. Product must not be used in unfavourable environment, e.g. dust, moisture,water, vibrations, etc.

EXPLANATIONS OF SYMBOLS USED

P1: Rated voltage, frequency.
Electric Icon
P2: Rated power.
Timer Icon
P3: Rated luminous flux.

P4: The specified luminous flux refers to the light source (LED module) used.

P5: Rated durability.

P6: Colour Rendering Index.

P7: Colour temperature.

P8: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
Tools Reequipment
P9: Viewing angle.
Tools Reequipment
P10: Protection against solid foreign objects bigger than 1,0mm provided. Protection against splashing water provided.
Tools Reequipment
P11: Protection against solid foreign objects bigger than 12mm provided.
Tools Reequipment
P12: Use only indoors.
Tools Reequipment
P13: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
Tools Reequipment
P14: The product is not compatible with lighting dimmers.

P15: Product meets the requirements of EU directives.
CE Mark
P1: Rated voltage, frequency.
P2: Rated power.
P3: Rated luminous flux.
P4: The specified luminous flux refers to the light source (LED module) used.
P5: Rated durability.
P6: Colour Rendering Index.
P7: Colour temperature.
P8: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
P9: Viewing angle.
P10: Protection against solid foreign objects bigger than 1,0mm provided. Protection against splashing water provided.
P11: Protection against solid foreign objects bigger than 12mm provided.
P12: Use only indoors.
P13: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
P14: The product is not compatible with lighting dimmers.
Tools Reequipment
P15: Product meets the requirements of EU directives.
P16: This symbol means that the product can be installed and operated in/on a surface made of materials which are normally flammable.
P17: The chipped globe, screen or protective shield must be replaced immediately.
P18: The product not suitable for covering with heat-insulating material.
P19: The product is compliant with all relevant United Kingdom regulations.
P20: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
P21: This product is equipped with a light source with energy efficiency class E.
P22: Class III. A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating higher than safe voltage.
P23: The product meets the requirements of technical regulations applicable in Ukraine.
P24: The control panel or control equipment can be replaced by the end user.


P25: The LED light source can only be replaced by qualified personnel (Kanlux service only).This symbol means that the product can be installed and operated in/on a surface made of materials which are normally flammable.
P17: The chipped globe, screen or protective shield must be replaced immediately.

P18: The product not suitable for covering with heat-insulating material.

P19: The product is compliant with all relevant United Kingdom regulations.
Tools Reequipment
P20: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
Tools Reequipment
P21: This product is equipped with a light source with energy efficiency class E.
Tools Reequipment
P22: Class III. A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating higher than safe voltage.
Tools Reequipment
P23: The product meets the requirements of technical regulations applicable in Ukraine.
Tools Reequipment
P24: The control panel or control equipment can be replaced by the end user.

P25: The LED light source can only be replaced by qualified personnel (Kanlux service only).

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.
P26: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

BLINGO IPRN

BLINGO IPRN38W 6060NW Panel LEDBLINGO IPRN38W 6060NW Panel
LED

BLINGO IPRN38W 6060NW Panel LED

BLINGO IPRN38W 6060NW Panel LED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals