JVC HA-XC62T Wireless Earphones User Guide
- June 13, 2024
- JVC
Table of Contents
JVC HA-XC62T Wireless Earphones
Product Information
- Model No.: HA-XC62T
- Manufacturer: JVCKENWOOD Corporation
- Address: 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN
- FCC ID: 2ADZH62L
- IC: 23340-62L
- FCC ID: 2ADZH62R
- IC: 23340-62R
Product Usage Instructions
- Make sure to charge the device before first use.
- To charge the device, use the provided charging case and connect it to a power source.
- Ensure that the rechargeable battery in the device is properly inserted and securely connected.
- Once fully charged, remove the device from the charging case.
- Turn on the device by pressing the power button.
- To pair the device with a Bluetooth-enabled device, activate Bluetooth on the desired device and search for available devices.
- Select “HA-XC62T” from the list of available devices on the Bluetooth-enabled device.
- Once connected, you can use the device to listen to audio or make calls.
- To adjust the volume, use the volume control buttons located on the device.
- To turn off the device, press and hold the power button until the device powers off.
Note: For detailed instructions on specific features and functions, please refer to the complete user manual provided with the product.
For U.S.A.
Supplier’s Declaration of Conformity
Model Number : HA-XC62T
Trade Name : JVC
Responsible party : JVCKENWOOD USA Corporation
Address: 1440 Corporate Drive, Irving, TX 75038
Telephone Number: 678-449-8879
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
ATTENTION: The product you have purchased is powered by a rechargeable
battery that is recyclable. Please call 1-800-8-BATTERY for information on how
to recycle this battery.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been
confirmed by additional research. HA-XC62T has been tested and found to comply
with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radiofrequency (RF) Exposure Guidelines.
For Canada
CAN ICES-3 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.
For Europe
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding Radio and RoHS. European representative of JVCKENWOOD
Corporation is:
JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel,
GERMANY
For United Kingdom
Dear Customer,
This apparatus is in conformance with the valid United Kingdom Regulations and
standards regarding Radio and RoHS. United Kingdom representative of
JVCKENWOOD Corporation is: JVCKENWOOD U.K. Limited, First Floor, Gleneagles,
the Belfry, Colonial Way, Watford, Hertfordshire WD24 4WH, UNITED KINGDOM
< Declaration of conformities > For Europe
Hereby, JVCKENWOOD declares that the radio equipment [HA-XC62T] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
(https://www.jvc.net/euukdoc/).
For United Kingdom
Hereby, JVCKENWOOD declares that the radio equipment [HA-XC62T] is in
compliance with the relevant statutory requirements. The full text of the
declaration of conformity is available at the following internet address:
(https://www.jvc.net/euukdoc/).
For Europe and United Kingdom
Information on Disposal of Old Electrical and Electronic Equipment and
Batteries (applicable for countries that have adopted separate waste
collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be
disposed as household waste. This product contains rechargeable battery.
Contact JVCKENWOOD authorised dealer for disposal.
WARNING
- Do not listen at high volume for an extended period. Do not use while driving or cycling.
- Pay special attention to traffic around you when using the headphones outside. Failure to do so could result in an accident.
- This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- This product contains rechargeable battery, which is not replaceable.
Danger of explosion if user replaced battery. Do not replace battery user own self.
WARNING
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Warnings for battery
Please do not handle the battery in the following manners.
It can lead to an explosion or leakage of flammable liquids and gases.
- Dispose in fire, discard, crush or cut
- Leave in extremely high temperature environment
- Leave in extremely low pressure environment
For Europe and United Kingdom
BLUETOOTH SPECIFICATION
Frequency range: 2.402 GHz – 2.480 GHz
Output power: +5.0 dBm (MAX), Power Class 1
For U.S.A.
Hearing Comfort and Well-Being
- Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play.
- If you experience a ringing in your ears, reduce volume or discontinue use.
Traffic Safety
- Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
- You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
- Do not turn up the volume so high that you cannot hear sound around you.
How To Use
- Before using, make sure to remove the insulating sheet and charge.
- During charging, the indicators flash. When charging is complete, all indicators light up.
- Charging time: Approx. 3.5 hours (when charging the earphones and charging case at the same time)
Turn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list and perform connection.
Flashes slowly
Insert the earphones with the logo in the horizontal position. Rotate the earphones and adjust to the most comfortable angle.
After using the earphones, place them back into the charging case.
https://manual3.jvckenwood.com/accessory/headphones/global/
For detailed operations such as phone call, troubleshooting and information on
the European Guarantee, please refer to the user manual.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>