R V R AUD2P1 AUD RDS And Audio Equipment User Manual
- June 13, 2024
- R V R
Table of Contents
RDS & AUDIO EQUIPMENTS
AUD – RDS
MODELS
AUD2P1 AUD2MP1
TRDS4002LUXOR-D
Designed to be the army knife in a transmission site when the audio has to be delivered, splitted, converted in different ways, the R.V.R. distribution’s systems are studied to feed multiple destinations handling stereo, mono, MPX, AES/EBU, S/P-DIF and Tos link sources.
ORDERING INFORMATION
| Model | Description |
|---|---|
| AUD2P1 | The audio splitter system allows you to split the audio signal in |
input and redistribute it on multiple outputs.
AUD2MP1| The audio splitter system allows you to split the audio signal in
input and redistribute it on multiple outputs.
OPTION|
AUD2MP1/V1| 2-Way passive audio distriution system for MPX/DIGITAL/L&R
signals.
AUD2MP1/V2| 2-Way passive audio distriution system for MPX+RDS/DIGITAL/L&R
signals.
AUD2MP1/V3| 2-Way passive audio distriution system for
MPX+RDS+SCAl/DIGITAL/L&R signals.
AUD2MP1/V4| 2-Way passive audio distriution system for
MPX+RDS+SCA1-2/DIGITAL/L&R signals.
Model| Description
---|---
TRDS4002-LUXOR-D| Advanced Radio Data System dynamical encoder with SNMP V 2
control.
AUD2P1
Accessory – Audio Distributor System.
https://www.rvr.it/it/products/components/changeover-units-system/1-1 -changeover-system/aud2p1/
AUD2MP1
Accessory – Audio Distributor System.
https://www.rvr.it/it/products/components/audio-equipments/aes-ebu- distributor-systems/aud2mp1/
TRDS-4002-LUXOR-D
RDS.
https://www.rvr.it/it/products/components/audio-equipments/luxor- series/trds4002-luxor-d-bib782w4/
AUD2P1
| Parameters | Value | Notes |
|---|
GENERALS
Operation temperature| | From -10 °C to + 50 °C|
Operation humidity| %| 95| Without condensing
MECHANICAL DIMENSIONS
Phisical dimensions L x H x W| mm| 70|
Overall dimensions L x H x W| mm| 72|
Weight| kg| About 0,5|
AUDIO INPUTS
Left & Right| Connector| | Terminal Block|
Impedance| | 600 Ω|
OUTPUTS
Left & Right| Connector| | 2x Terminal Block|
Channels loss| | 8 db @ 10 kΩ Load|
Bandwidth| | From DC to 20 kHz|
AUD2MP1
| Parameters | Value | Notes |
|---|
GENERALS
Operating temperature| | °C| From -1(1 to +bll|
Operating humidity| | %| 95% non condensing|
MECHANICAL DIMENSIONS
Phisical dimensions| | mm / inch| 483 / 19| EIA rack
LxHxW| mm / inch| 44 / 31/2| 1 HE
Weight| | kg| About 2|
AUDIO INPUTS
Left & Right| Connector| | XLR (female)| |
Impedance| Ohm| 600 (10k on request)| Balanced
Channels loss| dBm| 6|
Bandwidth| Hz| From DC to 20k|
MPX| Connector| | BNC|
RDS| Impedance| Ohm| 10k| Unbalanced
SCA1| Channels loss| dBm| 6|
SCA2| Bandwidth| Hz| From DC to 100k|
| Connector| | XLR (female)|
AES/EBU| Impedance| Ohm| 110| Balanced
OUTPUTS
Left & Right
| Connector| | 2 x XLR (male)|
Impedance| Ohm| 600 (10k on request)| Balanced
Channels loss| dBm| 6|
Bandwidth| Hz| From DC to 20k|
MPX| Connector| | 2 x BNC|
RDS| Impedance| Ohm| 10k| Unbalanced
SCA1| Channels loss| dBm| 6|
SCA2| Bandwidth| Hz| From DC to 100k|
AES/EBU| Connector| | 2 x XLR (male)|
Impedance| Ohm| 110| Balanced
Insert loss| dB| 6|
TRDS4002-LUXOR-D
| Parameters | Value | Notes |
|---|
GENERALS
Operating temperature| | From -10 °C to + 50 °C|
Operating humidity| %| 95| Without condensing
A/D & D/A conversion| | 24 bit|
DSP Elaboration| | 32 bit, fixed point|
RDS function| EN50067| | PTY, PTYN, TA, TP, MS, DI, PI, PS, AF, PIN,
EON, RT, TDC, IMC, EWS, IH, CT
Command formats| | UECP – SPB490 Ver.6.1 / 2003|
Frequency| | 57 kHz ± 1,5 Hz| (Internal/external reference)
57 kHz carrier attenuation| dB| Ø 75|
Phase 57 kHz| | Adjustable up to 360° in 0,33° increme| nts
Out of band emission| dB| Ø 100|
POWER REQUIREMENTS
AC Power input| AC Supply Voltage| | 115 /230 VAC ± 10%|
Connector| W| VDE IEC Standard|
MECHANICAL DIMENSIONS
Overall dimensions L x H x W| mm / inch| 483| EIA rack
mm / inch| 44 / 3 1/2| 1HE
Weight| kg| About 3,5|
AUDIO INPUTS
MPX| Connector| | BNC| Unbalanced (female)
Impedance| k Ω| 10|
Input level| | Gain 0dB / Max. +20 dBu|
PILOT| Connector| | BNC| Unbalanced (female)
Impedance| k Ω| 10|
Input level| | Gain 0dB / Max. +20 dBu| (Sinusoid. or TTL)
OUTPUTS
1 &2| Connector| | BNC| Unbalanced (female)
Impedance| Ω| 50|
Output level| dBu| +20| Adjustable via software
CONNECTORS
RS232 Serial port| Connector| | 3x DB9 (female)|
Connection rate| | From 1200 to 115200 baud 8, N, 1|
Remote Input Connector| | DB25 (male): 8 input + 8 output (optional)|
Ethernet Connector| | RJ45 (female) WEB & SNMP v.1.0 (optional) SNMP V2.C
(TRDSP-4002-LUXOR-D)
WEB Server| | Built in for TRDS4002-LUXOR-D|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore, 2/2c
40138 Bologna Italy
Phone +39 0516010506
Fax +39 0516011104
sales@rvr.it
www.rvr.it