R V R PTX30LCD-S PTX-LCD SERIES FM Transmitters User Manual
- June 13, 2024
- R V R
Table of Contents
FM TRANSMITTERS
PTX-LCD SERIES/ PTX-LCD SERIES
PROFESSIONAL ANALOGIC from 30W to 150W
MODELS
PTX30LCD/S/PTX50LCD/S
PTX150LCD/S/PTX100LCD/S
PTX30LCD-S PTX-LCD SERIES FM Transmitters
- Globally recognized as the most sold professional exciter.
- Excellent as exciter in modular systems or as a compact transmitter.
- Full compliance with EC, FCC and CCIR standards.
- Standard Frequency Range: 87.5 – 108 MHz Other bands on request.
- 10% – 100% Output Power continuously adjustable.
- Fold-back control for effective “VSRW” protection.
- Includes IAMLC: Intelligent Automatic Modulation Level Control.
- Built-in high-performance stereo coder.
- Analogue Inputs: Analogue Stereo L&R, Mono, MPX.
- Digital Inputs: AES/EBU, S/PDIF, TOSLINK.
- Auxiliary input for SCA / RDS signals.
ORDERING INFORMATION
Model | Description |
---|---|
PTX30LCD/S | 30W Compact Stereo Transmitter. |
PTX50LCD/S | 50W Compact Stereo Transmitter. |
PTX100LCD/S | 100W Compact Stereo Transmitter. |
PTX150LCD/S | 150W Compact Stereo Transmitter. |
OPTION
/08DIG-PTX-16 | Telemetry system via parallel interface. |
---|---|
/10MHZ-PTX | External 10MHZ cable. |
https://www.rvr.it/it/products/compact-trasmitters/ptx-lcd- series/fino-a-50w/ptx30lcd-s-tbq7c5ux/
https://www.rvr.it/it/products/compact-trasmitters/ptx-lcd- series/fino-a-50w/ptx50lcd-s-hv5sz7jd/https://www.rvr.it/it/products /compact-trasmitters/ptx-lcd- series/fino-a-150w/ptx100lcd-s-bwoq3vzt/https://www.rvr.it/it/products /compact-trasmitters/ptx-lcd-series/fino-a-150w/ptx150lcd-s-do0n274h/
PTX30LCD/S | PTX50LCD/S |
---|---|
Parameters | U.M. |
GENERALS
Frequency range| MHz| 87,5 ÷ 108|
Rated output power| W| 30| 50| Continuously adjustable from 10 to 100%
Modulation type| | Direct carrier frequency|
Operational mode| | Mono, Stereo, Multiplex|
Working temperature| °C| -5 to + 50|
Working humidity| %| 95| Without condensing
Working altitude| m| Up to 3000| With adequate air evacuation system in
site
Frequency programmability| kHz| From software, with 10| Steps
Frequency stability Working Temp. from -5°C to 50°C| ppm| ±1|
Modulation capability ** Refered @ 0dBu for 75kHz| kHz| 150 Stereo,
200 Mono/MPX| Meets or exceeds all FCC and CCIR rules
Pre-emphasis mode| μS| 0, 25, 50, (CCIR), 75 (FCC)| Selectable
POWER REQUIREMENTS
AC Power input| AC Supply Voltage| VAC| 115 – 125 – 230 – 250|
AC Apparent Power Consumption| VA| 135| 220|
Active Power Consumption| W| 95| 150|
Power Factor| | 0,68|
Overall Efficiency| %| Typical 31| Typical 33|
Connector| | IEC Standard|
MECHANICAL DIMENSIONS
Phisical dimensions| Front panel width| mm / inch| 483 / 19| EIA rack
Front panel height| mm / inch| 88 / 3 1/2 2HE|
Overall depth| mm| 400|
Chassis depth| mm| 389|
Weight| kg| About 10| About 13|
Cooling| | Forced, with internal fan|
Acoustic noise| dBA| < 56|
AUDIO INPUTS
Left / Mono**| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 10 k or 600|
Input Level /Adjust| dBu| -13 to +14| 1 dB step adjustable
Right
| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 10 k or 600|
Input Level| dBu| -13 to +14| 1 dB step adjustable
MPX| Connector| | BNC|
Type| | Unbalanced|
Impedance| Ohm| 10 k or 50|
Input Level / Adjust| dBu| -13 to +14| 1 dB step adjustable
SCA/RDS| Connector| | 3 x BNC|
Type| | Unbalanced|
Impedance| Ohm| 10 k|
Subcarrier Level @ 0 dBu| dB| -17 to -40| Adjustable
AES/EBU (optional)| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 110|
TOS/Link (optional)| Connector| | TOS LINk|
Type| | Optical|
OUTPUTS
RF Output| Connector| | N type|
Impedance| Ohm| 50|
RF Monitor| Connector| | BNC|
Impedance| Ohm| 50|
Output Level| dBm| Approx. -30|
Pilot output| Connector| | BNC|
Load Impedance| Ohm| >4.7 k|
Output Level| Vpp| 1| Sinusoidal
FUSES
On mains| | 1 External fuse F 6,3 T – 5×20 mm|
On services| | X|
On PA Supply| | 1 External fuse F 6,3 A – 5×20 mm| 1 External fuse F 10
A – 5×20 mm|
On driver supply| | X|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
PTX100LCD/S | PTX150LCD/S |
---|---|
Parameters | U.M. |
GENERALS
Frequency range| MHz| 87,5 ÷ 108|
Rated output power| W| 100| 150| Continuously adjustable from 10 to 100%
Modulation type| | Direct carrier frequency|
Operational mode| | Mono, Stereo, Multiplex|
Working temperature| °C| -5 to + 50|
Working humidity| %| 95| Without condensing
Working altitude| m| Up to 3000| With adequate air evacuation system in
site
Frequency programmability| kHz| From software, with 10| Steps
Frequency stability Working Temp. from -5°C to 50°C| ppm| ±1|
Modulation capability Referred @ 0dBu for 75kHz| kHz| 150 Stereo, 200
Mono/MPX| Meets or exceeds all FCC and CCIR rules
Pre-emphasis mode| μS| 0, 25, 50, (CCIR), 75 (FCC)| Selectable
POWER REQUIREMENTS
AC Power input| AC Supply Voltage| VAC| 115 – 125 – 230 – 250|
AC Apparent Power Consumption| VA| 350| 458|
Active Power Consumption| W| 250| 330|
Power Factor| | 0,71| 0,72|
Overall Efficiency| %| Typical 40| Typical 45|
Connector| | IEC Standard|
MECHANICAL DIMENSIONS
Physicals dimensions| Front panel width| mm / inch| 483 / 19| EIA rack
Front panel height| mm / inch| 88 / 3 1/2 2HE|
Overall depth| mm| 400|
Chassis depth| mm| 389|
Weight| kg| About 15|
Cooling| | Forced, with internal fan|
Acoustic noise| dBA| < 56|
AUDIO INPUTS
Left / Mono| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 10 k or 600|
Input Level /Adjust| dBu| -13 to +14| 1 dB step adjustable
Right| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 10 k or 600|
Input Level| dBu| -13 to +14| 1 dB step adjustable
MPX| Connector| | BNC|
Type| | Unbalanced|
Impedance| Ohm| 10 k or 50|
Input Level / Adjust| dBu| -13 to +14| 1 dB step adjustable
SCA/RDS| Connector| | 3 x BNC|
Type| | Unbalanced|
Impedance| Ohm| 10 k|
Subcarrier Level @ 0 dBu| dB| -17 to -40| Adjustable
AES/EBU (optional)| Connector| | XLR F|
Type| | Balanced|
Impedance| Ohm| 110|
TOS/Link (optional)| Connector| | TOS-LINK|
Type| | Optical|
OUTPUTS
RF Output| Connector| | N type|
Impedance| Ohm| 50|
RF Monitor| Connector| | BNC|
Impedance| Ohm| 50|
Output Level| dBm| Approx. -30|
Pilot output| Connector| | BNC|
Load Impedance| Ohm| >4.7 k|
Output Level| Vpp| 1| Sinusoidal
FUSES
On mains| | 1 External fuse F 6,3 T – 5×20 mm|
On services| | X|
On PA Supply| | 1 External fuse F 10 A – 5×20 mm|
On driver supply| | X|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Electronica S.r.l.
Via del Fond tore 2/2
40138 Bologna – ltaly
Phone +39 0516010506
sales@rvr.it
www.rvr.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>