R V R TX02KSS Modular Series Broadcast Systems FM Stations User Manual

FM STATIONS
MODULAR SERIES
TX-KSS MODULAR SERIES
MID/HIGH POWER AIR COOLED
from 2000W to 14.000W
MODELS

TX02KSS Modular Series Broadcast Systems FM Stations

• Scalable Solution from 2.000W to 14.000W.
• Best transmission quality, at the best market place.
• The most flexible combinations available for high reliability and redundancy
• N+1 Configuration available for 24/7 business continuity.
• Tunable over the entire FM band 87.5 – 108 MHz, without tuning. Other bands on request.
• WEB, SNMP2, GSM, Serial remote controls (option).
•  Full compliance with EC, FCC and CCIR standards.

Exciters:

• BLUES, TEX, PTX Series depending on client’s requirements and budget.
• Single and Dual Drive with automatic or manual changeover.
• Fold-back control for effective “VSRW” protection.
• Including IAMLC: Intelligent Automatic Modulation Level Control.

Amplifiers:

• Single amplifier’s unis: from 1.000W to 3.500W.
• High-gain with very low input drive power requirement.
• Adjustable power output from 10 to 100 %.
• Exclusive “Long Life FET” technology for mosfet life extension.

ORDERING INFORMATION

SCML1+1SL/V2 + 2x PTX100DDS).
TX03KSS/61D113B| Modular transmitter, 3KW (composed of HC3 + 3x PJ1000LIGHT + SCML1+1SL/V2 + 2x PTX100DDS).
TX3K5SS/60D121B| Modular transmitter, 3.5KW (composed of 1x PJ3500LCD + SCML1+1SL/V2 + 2x PTX30DDS).
TX04KSS/61D114B| Modular transmitter, 4KW (composed of HC4 + 4x PJ1000LIGHT + SCML1+1SL/V2 + 2x PTX100DDS).
TX05KSS/61D082B| Modular transmitter, 5KW (composed of HC2 + 2x PJ2500LCD + SCML1+1SL/V2 + 2x PTX100DDS).
TX07KSS/61D122B| Modular transmitter, 7KW (composed of HC2 + 2x PJ3500LCD + SCML1+1SL/V2 + 2x PTX100DDS).
TX7K5SS/61D083B| Modular transmitter, 7.5KW (composed of HC3 + 3x PJ2500LCD + SCML1+1SL/V2 + 2x PTX100DDS).
TX10KSS/62D084B| Modular transmitter, 10KW (composed of HC4 + 4x PJ2500LCD + SCML1+1SL/V2 + 2x PTX150DDS).
TX12KSS/62D085B| Modular transmitter, 12KW (composed of HC5+ 5x PJ2500LCD + SCML1+1SL/V2 + 2x PTX150DDS).
TX14KSS/62D124B| Modular transmitter, 14KW (composed of HC4+ 4x PJ3500LCD + SCML1+1SL/V2 + 2x PTX150DDS).

TX04KSS/61D114B
Modular transmitter, 4KW (composed of HC4 + 4x PJ1000LIGHT + SCML1+1SL/V2 + 2x PTX100DDS).

https://www.rvr.it/it/products/scalable-trasmitters/modular- series/fino-a-5000w/tx04k-compact-4xpj1000light/

TX7K5SS/61D083B
Modular transmitter, 7.5KW (composed of HC3 + 3x PJ2500LCD + SCML1+1SL/V2 + 2x PTX100DDS).

https://www.rvr.it/it/products/scalable-trasmitters/modular- series/mfino-a-10-000w/tx7k5-compact-3xpj2500lcd/

TX14KSS/62D124B
Modular transmitter, 14KW (composed of HC4+ 4x PJ3500LCD + SCML1+1SL/V2 + 2x PTX150DDS).

https://www.rvr.it/it/products/scalable-trasmitters/modular- series/mfino-a-10-000w/tx14kss/

TX3K5SS/60D121B

GENERALS
RF Output Power| kW| 3,5|
Frequency Range| MHz| 87,5 – 108|
Frequency Stability| ppm| > 1|
Frequency programmability| | By software, with 1, 10, 100 , 1000 kHz steps|
Nominal Frequency Deviation| | ±75 KHz (peak)|
Maximum Frequency Deviation| | ±150 KHz (peak)|
Class of Emission| | 180KF8E Direct to Channel|
Modulation Mode| | Mono, Stereo, Multiplex, SCA, RDS, Aux|
Stereo transmissions| | Acc. to ITU-R / Rec. 450 (Pilot tone)|
RF Output Impedance| | 50 Ω, Unbalanced|
RF Output Connector| | 7/8” EIA Flange|
VSWR| | 1.4:1 with automatic fold-back at higher VSWR|
Pre-emphasis Mode| | 0/50 (CCIR) µs,75 (FCC) μs|
Asynchronous AM S/N Ratio| dB| Typically > 70|
Synchronous AM S/N Ratio| dB| Typically > 55|
Harmonics suppression and Spurious| dB| Typically < 85|
Overall efficiency| %| Typically > 70|
RF Harmonics| | Exceeds ETSI/CCIR/FCC requirements|
RF Spurious| | Exceeds ETSI/CCIR/FCC requirements|
Analogue Input level {+75 Khz (peak) deviation }| | -12,5 dBu – +12,5 dBu (adjustable)|
Digital Input level {+75 Khz (peak) deviation }| | -20,0 dBFS – 0 dBFS (adjustable)|
MONO OPERATION
S/N ratio| dB| Typically > 83|
Total Harmonic Distortion + Noise| %| Typically < 0,03|
Inter Modulation Distortion SMPTE| %| Typically < 0,02|
Frequency Response| dB| Typically ± 0,2|
Audio Input Impedance| | 600 Ω or 10 kΩ|
MPX OPERATION
Composite S/N ratio| dB| Typically > 80|
Total Harmonic Distortion + Noise| %| Typically < 0,05|
Inter Modulation Distortion| %| Typically < 0,05|
Frequency Response| dB| Typically ± 0,2|
Audio Input Impedance| | 10 kΩ|
STEREO OPERATION
Stereo FM S/N Ratio| dB| Typically > 83|
Total Harmonic Distortion + Noise (L or R)| %| Typically < 0,02|
Inter Modulation Distortion SMPTE (L or R)| %| Typically < 0,02|
Frequency response (L or R)| dB| Typically ± 0,2|
Linear Cross Talk| dB| Typically > 50|
Non-linear Cross Talk| dB| Typically > 50|
Stereo Separation (Sine Wave)| dB| Typically > 70|
Audio Input Impedance| | 600 Ω or 10 kΩ|
Digital Input Impedance| | 110 Ω|

TX14KSS/62D124B

GENERALS
RF Output Power| kW| 14|
Frequency Range| MHz| 87,5 – 108|
Frequency Stability| ppm| > 1|
Frequency programmability| | By software, with 1, 10, 100 , 1000 kHz steps|
Nominal Frequency Deviation| | ±75 KHz (peak)|
Maximum Frequency Deviation| | ±150 KHz (peak)|
Class of Emission| | 180KF8E Direct to Channel|
Modulation Mode| | Mono, Stereo, Multiplex, SCA, RDS, Aux|
Stereo transmissions| | Acc. to ITU-R / Rec. 450 (Pilot tone)|
RF Output Impedance| | 50 Ω, Unbalanced|
RF Output Connector| | 1-5/8” EIA Flange|
VSWR| | 1.4:1 with automatic fold-back at higher VSWR|
Pre-emphasis Mode| | 0/50 (CCIR) µs,75 (FCC) μs|
Asynchronous AM S/N Ratio| dB| Typically > 70|
Synchronous AM S/N Ratio| dB| Typically > 55|
Harmonics suppression and Spurious| dB| Typically < 85|
Overall efficiency| %| Typically > 70|
RF Harmonics| | Exceeds ETSI/CCIR/FCC requirements|
RF Spurious| | Exceeds ETSI/CCIR/FCC requirements|
Analogue Input level {+75 Khz (peak) deviation }| | -12,5 dBu – +12,5 dBu (adjustable)|
Digital Input level {+75 Khz (peak) deviation }| | -20,0 dBFS – 0 dBFS (adjustable)|
MONO OPERATION
S/N ratio| dB| Typically > 83|
Total Harmonic Distortion + Noise| %| Typically < 0,03|
Inter Modulation Distortion SMPTE| %| Typically < 0,02|
Frequency Response| dB| Typically ± 0,2|
Audio Input Impedance| | 600 Ω or 10 kΩ|
MPX OPERATION
Composite S/N ratio| dB| Typically > 80|
Total Harmonic Distortion + Noise| %| Typically < 0,05|
Inter Modulation Distortion| %| Typically < 0,05|
Frequency Response| dB| Typically ± 0,2|
Audio Input Impedance| | 10 kΩ|
STEREO OPERATION
Stereo FM S/N Ratio| dB| Typically > 83|
Total Harmonic Distortion + Noise (L or R)| %| Typically < 0,02|
Inter Modulation Distortion SMPTE (L or R)| %| Typically < 0,02|
Frequency response (L or R)| dB| Typically ± 0,2|
Linear Cross Talk| dB| Typically > 50|
Non-linear Cross Talk| dB| Typically > 50|
Stereo Separation (Sine Wave)| dB| Typically > 70|
Audio Input Impedance| | 600 Ω or 10 kΩ|
Digital Input Impedance| | 110 Ω|

All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.

R.V.R. Elettronica S.r.l.
Via del Fonditore, 2/2c
40138 Bologna Italy
Phone +39 0516010506
Fax +39 0516011104
sales@rvr.it
www.rvr.it ISO 9001
https://www.rvr.it
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2
40138 Bologna – ltaly
Phone +39 0516010506
sales@rvr.it
www.rvr.i

References

• R.V.R. Elettronica - Broadcast Systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>