R V R PJ1000LIGHT Broadcast Systems FM Amplifiers User Manual
- June 13, 2024
- R V R
Table of Contents
PJ1000LIGHT Broadcast
Systems FM Amplifiers
User Manual
PJ1000LIGHT Broadcast Systems FM Amplifiers
SERIES
BROADBAND AIR COOLED AMPLIFIERS
from 1000W to 3500W
MODELS
PJ1000LIGHT PJ2500LCD
PJ3500LCD
FM AMPLIFIERS
- High-gain amplifier with very low input drive power requirement.
- 10% – 100% Output Power continuously adjustable.
- APC Automatic Power Control ensuring reliable operation.
- Enhanced energy saving power supply.
- Exceed 70% efficiency across the bandwidth.
- Remotable from all digital RVR telemetry systems.
- Full compliance with EC, FCC and CCIR standards.
- Ease of access and simplified maintenance.
ORDERING INFORMATION
| Model | Description |
|---|---|
| PJ1000LIGHT | 1000W High Redundancy Compact Stereo Amplifier. |
| PJ2500LCD | 2500W Compact Stereo Amplifier. |
| PJ3500LCD | 3500W Compact Stereo Amplifier. |
OPTION
| /CNT7/8-150 | 7/8 output RF connector. |
|---|
PJ1000LIGHT
1000W High Redundancy Compact Amplifier. 
https://www.rvr.it/it/products/compact-amplifiers/pj-lcd- series/fino-a-3-500w/pj1000light-t3x3bkfy/
PJ2500LCD
2500W Compact Amplifier.
https://www.rvr.it/it/products
/compact-amplifiers/pj-lcd-series/fino-a-3-500w/pj2500lcd-
fcxmnugy/
PJ3500LCD
3500W Compact Amplifier.
https://www.rvr.it/it/products
/compact-amplifiers/pj-lcd-series/fino-a-3-500w/pj3500lcd-
klc5t19g/
PJ1000LIGHT
Parameters U.M.
Value| Notes
---|---
GENERALS
Frequency range| MHz| 87,5 ÷ 108|
Rated output power| W| 1000|
Spurious & harmonic suppression| dBc| <75 (80 typical)| Meets or exceeds
all FCC and CCIR rules
Working temperature| °C| -5 to + 50|
Working humidity| %| 95| Without condensing
Working altitude| m| Up to 3000| With adequate air evacuation system in
site
POWER REQUIREMENTS
AC Power input
| AC Supply Voltage| VAC| 230 ±15%|
AC Apparent Power Consumption| VA| 1650| Monophase
Active Power Consumption| W| 1630|
Power Factor| | 0,998|
Overall Efficiency| %| Typical 70|
Connector| | Terminal Block|
MECHANICAL DIMENSIONS
Phisical dimensions
| Front panel width| mm / inch| 483 / 19| EIA rack
Front panel height| mm / inch| 132 / 5 1/4 3HE|
Overall depth| mm / inch| 550 / 21,65|
Chassis depth| mm / inch| 500 / 19,69|
Weight| kg| About 25|
Cooling| | Forced, with internal fan|
Acoustic noise| dBA| < 75| Leq 3 min @ 1 m
AUDIO INPUTS
RF Input| Connector| | N type|
Impedance| Ohm| 50|
Driver power for rated output| W| 11|
Max input power before protection| W| 25|
OUTPUTS
RF Output| Connector| | 7/16″ EIA|
Impedance| Ohm| 50|
RF Monitor
| Connector| | BNC|
Impedance| Ohm| 50|
Output Level| dBc| Approx. -60|
FUSES
On mains| | 2 External fuse F 25 T – 10×38 mm|
On services| | 1 External F3,15 A 2×20 mm|
On PA Supply| | 3External F 16 A 10x38mm|
On aux VDE socket| | X|
PJ2500LCD
| Parameters U.M. Value | Notes |
|---|
GENERALS
Frequency range| MHz| 87,5 ÷ 108|
Rated output power| W| 2500| 3500|
Modulation type| dBc| <80 (82 typical)| <82 (85 typical)| Meets or
exceeds all FCC and CCIR rules
Working temperature| °C| -5 to + 50|
Working humidity| %| 95| Without condensing
Working altitude| m| Up to 3000| Up to 2000| With adequate air
evacuation system in site
POWER REQUIREMENTS
AC Power input
| AC Supply Voltage| VAC| 230 ±15%| 230 +10% -15% | 400 +10% -15%| Monophase
| Threephases Y
AC Apparent Power Consumption| VA| 3578| 4996|
Active Power Consumption| W| 3571| 4987|
Power Factor| | 0,998|
Overall Efficiency| %| Typical 70|
Connector| | Terminal Block|
MECHANICAL DIMENSIONS
Phisical dimensions
| Front panel width| mm / inch| 483 / 19| EIA rack
Front panel height| mm / inch| 132 / 3 1/2 3HE|
Overall depth| mm| 670|
Chassis depth| mm| 650|
Weight| kg| About 31|
Cooling| | Forced, with internal fan|
Acoustic noise| dBA| < 75| Leq 3 min @ 1 m
AUDIO INPUTS
RFInput| Connector| | N type|
Impedance| Ohm| 50|
Driver power for rated output| W| 30|
Max input power before protection| W| 35|
OUTPUTS
RF Output| Connector| | 7/8″ EIA|
Impedance| Ohm| 50|
RF Monitor| Connector| | BNC|
Impedance| Ohm| 50|
Output Level| dBc| Approx. -60|
FUSES
On mains| | 3 External fuse F 25 T – 10×38 mm| 3 External fuse F 10 T –
6×30 mm|
On services| | 1 External F3,15 A 5×20 mm| X|
On PA Supply| | 4 Internal F 25 A 10x38mm| 4 Internal F 32 A 10x38mm|
On aux VDE socket| | X| X|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2
40138 Bologna – ltaly
Phone +39 0516010506
sales@rvr.it
www.rvr.it