R V R Redundant Transmitters System Broadcast Systems FM Stations User Manual
- June 13, 2024
- R V R
Table of Contents
R V R Redundant Transmitters System Broadcast Systems FM Stations User
Manual
Configuration examples for redundant transmission systems.
Double exciter
This system is composed of 2 exciters A and B, in which one is ON and the other is OFF. In case the unit that is on fails, it will be replaced by the second unit.
“1+1R” Passive system transmitters
This system is composed of 2 transmitters, A and B, in which 1 is ON and is connected to the antenna and the second is OFF and is connected to the dummy load. Incase the operating transmitter fails, it is immediately replaced with the second unit.
“1+1R” Active system transmitters
This system is composed of 2 transmitters, A and B, in which 1 is ON and is
connected to the antenna and the second is OFF and is connected to the dummy
load. In case the operating transmitter fails, it is immediately replaced with
the second unit.
“6+1R” Active system transmitters
This system is composed of “N” transmitters connected to the antenna and 1 transmitter used as back-up unit that is connected to the dummy load.In case one of the “N” transmitters fails it is immediately replaced with the back-up unit and the faulty unit is switched to the dummy load.
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2 40138 Bologna – ltaly
Phone : +39 0516010506
sales@rvr.it
www.rvr.it