BabylissPRO BNT4072TUC Ultra-Thin Hair Straightener User Manual

June 13, 2024
BaBylissPRO

BabylissPRO BNT4072TUC Ultra-Thin Hair Straightener

BabylissPRO- BNT4072TUC- Ultra-Thin- Hair- Straightener - product

IMPORTANT SAFETY INSTRUCTIONS

DANGER – As with most electrical appliances, parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

  • Always unplug immediately after using.
  • Always turn off the iron when not in use.
  • Do not use while bathing or in a shower.
  • Do not place or store appliances where it can fall or be pulled into a tub or sink.
  • Do not place in or drop into water or other liquids.
  • If the iron falls into water, unplug it immediately. Do not reach into the water

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

  • Plug the iron into an electrical outlet.
  • The iron should never be left unattended when plugged in.
  • Do not pull, twist, or wrap cord around the iron.
  • This iron should not be used by, on, or near children or individuals with certain disabilities.
  • Use the iron only for its intended use as described in this guide.
  • Do not use attachments not recommended by the manufacturer.
  • Never operate this iron if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged or has fallen into water. Return the appliance to a service center for examination and repair.
  • Keep the cord away from heated surfaces.
  • Do not wrap the cord around the appliance.
  • Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
  • Never use while sleeping.
  • Never drop or insert any object into any opening or hole in the iron.
  • Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Do not use an extension cord with the iron.
  • Avoid multiple cables to a plug.
  • The iron and casing are hot when in use.
  • Do not let eyes and bare skin touch heated surfaces.
  • Do not place the iron directly on any surface while it is hot or plugged in.
  • Do not touch hot surfaces of the iron.
  • This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative.
  • Suitable for dry locations ONLY.
  • While not in use, ensure the iron has completely cooled before being placed into any storage.
  • Do not use this appliance near bathtubs, showers, toilets or any other recipient containing water.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.

OPERATING INSTRUCTIONS

This appliance is intended for professional or household use. Use on Alternating Current (50-60Hz) only. Standard appliances are designed to operate at 120-240V AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature

DUAL VOLTAGE
This flat iron has dual voltage. It will automatically adjust to the proper voltage. Use an adapter plug (not included) with correct configuration, prior to use in outlet.

STRAIGHTENING BASICS

  • Plug the straightening iron into a standard electrical outlet. It is not necessary to touch the iron with your hand to judge readiness.
  • Use the temperature controls to select the setting for your hair type. You can use the chart outlined below as a reference. The iron will heat up very quickly.
  • Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp.

TEMPERATURE SETTINGS HAIR TYPE

1-10 (240˚F – 275˚F)                               Fragile, very fine hair
11-20 (276˚F – 310˚F)                                 Thin, easy-to-straighten hair
21-30 (311˚F – 355˚F)                                 Normal textured hair
31-40 (356˚F – 400˚F)                                 Wavy or curly hair
41-50 (401˚F – 450˚F)                                 Coarse, very thick hair

  • Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary.
  • Let the hair cool before combing.

STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle.

TITANIUM TECHNOLOGY
Your titanium iron has many benefits. Titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The titanium plate provides the ultimate heat performance for beautiful, healthy-looking hair and yields maximum far-infrared heat, penetrating the hair for gentle styling without damaging hair. Titanium emits natural ions for faster styling, locking in hair’s own natural moisture. This titanium iron will give your hair a smooth, silky shine while eliminating frizz.

Get To Know Your Dryer PROFESSIONAL STRAIGHTENER

PROFESSIONAL STRAIGHTENER

  • Model BNT4072TUC
    • 1″ Ultra-Thin Straightener
  • Model BNT4073TUC
    • 11/2″ Ultra-Thin Straightener
  • Model BNT4074TUC
    • 2″ Ultra-Thin Straightener

NOTICE

  • THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THEART TECHNOLOGY ALLOWS THE HEATER TO
  • REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
  • DO NOT LEAVE PRODUCT ON OR PLUGGED IN
  • WHILE NOT IN USE. UNIT WILL BURN OUT IF
  • POWER IS KEPT ON FOR AN EXTENDED
  • PERIOD OF TIME. THE WARRANTY WILL BE VOIDED.
  • TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

USER MAINTENANCE
Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

  • NEVER allow the power supply cord to be pulled or twisted.
  • Never wrap the cord around the unit.
  • Damage will occur at the high flex point of entry into the unit, causing it to rupture and short.
  • Inspect the cord frequently for damage.
  • Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections.

FCC

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • This device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

SUPPLIER’S DECLARATION OF CONFORMITY

  • Brand: BaBylissPRO®
  • Model No.: BNT4072TUC/BNT4073TUC/
  • BNT4074TUC
  • Description: Straightener
  • Responsible Party: Conair Corporation
  • 1 Cummings Point Road
  • Stamford, CT 06902 203-351-9000
  • Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference,
  • This device must accept any interference received, including interference that may cause undesirable operation.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

WARRANTY

LIMITED FOUR-YEAR WARRANTY (For U.S. and Canada only)

BabylissPro will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $10.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-326-6247 for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or limitation of specia incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

SERVICE CENTER

  • BabylissPro
  • Service Department
  • 7475 North Glen Harbor Blvd.
  • Glendale, AZ 85307

FAQs

How should I clean the BabylissPRO BNT4072TUC hair straightener?

To clean the hair straightener, make sure it is unplugged and cooled down. Use a damp cloth or sponge to wipe the plates gently. Avoid using abrasive materials or harsh chemicals that could damage the plates.

Can I use this straightener on wet hair?

No, it is essential to use the straightener on dry hair only. Using it on wet hair can cause damage to the hair and the straightener.

What is the maximum temperature setting for this straightener?

The BabylissPRO BNT4072TUC has a maximum temperature setting of 450°F (232°C), allowing for efficient straightening and styling.

Can I adjust the temperature settings on this straightener?

Yes, you can adjust the temperature settings to suit your hair type and styling needs. It has multiple heat settings for versatility.

Is this straightener suitable for all hair types?

Yes, it is suitable for various hair types, from fine to coarse. You can adjust the temperature to match your specific hair texture and styling preferences.

Does it have automatic shut-off for safety?

Yes, the straightener features an automatic shut-off function. It will turn off after a period of inactivity, enhancing safety and energy efficiency.

Can I use this straightener while traveling internationally?

Yes, it is compatible with international voltage standards, making it suitable for travel. However, you may need an adapter plug to fit different outlet types.

Does it come with a warranty?

Yes, the BabylissPRO BNT4072TUC typically comes with a manufacturer's warranty. Be sure to check the warranty details provided with your purchase.

Is it safe to leave the straightener plugged in when not in use?

It is not recommended to leave the straightener plugged in when not in use, even with the automatic shut-off feature. Unplugging it ensures safety and conserves energy.

Can I use heat protectant products with this straightener?

Yes, using a heat protectant spray or serum is recommended before using any heat styling tool, including this straightener. It helps protect your hair from heat damage.

What is the benefit of the ultra-thin design?

The ultra-thin design of the straightener allows for precision styling, including creating curls and waves. It also makes it more convenient for travel and storage.

How long does it take to heat up?

The straightener heats up quickly, usually within a minute or less, depending on the selected temperature setting.

Can I use it to curl my hair?

Yes, the ultra-thin design and rounded edges of the plates make it suitable for curling hair. You can create various hairstyles with this versatile tool.

Is it suitable for professional use?

Yes, many professional hairstylists choose BabylissPRO tools for their quality and performance. This straightener can be used both at home and in professional salon settings.

How should I store the straightener?

After use, ensure the straightener is cool and then store it in a safe and dry place, away from moisture and direct sunlight. It's a good practice to use the included heat-resistant mat for storage.

Can I use the straightener daily?

Using the straightener daily is generally safe as long as you use it correctly and employ heat protectant products. However, it's advisable to give your hair occasional breaks from heat styling to prevent damage.

Video- Overview

Download This PDF Link: BabylissPRO BNT4072TUC Ultra-Thin Hair Straightener User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BaBylissPRO User Manuals

Related Manuals