BERTAZZONI KT30XT 30 T-Shape Wallmounted Hood Instruction Manual
- June 13, 2024
- Bertazzoni
Table of Contents
KT30XT
30″ T-SHAPE WALLMOUNTED HOOD
STAINLESS STEEL
PRODUCT DIMENSIONS
|
---|---
PRODUCT INSTALLATION
ELECTRICAL CONNECTION
The Power Supply Cord and plug must be connected to a separate 120 Volt AC 60
Hz, 15 Amp or more branch circuit, single grounded receptacle.
The cord has a 3-pronged plug and must be installed into an outlet that is
properly grounded. The electrical receptacle must be within the minimum cord
length of 59″
WHEN USING 3-PRONGED PLUG
Disclaimer: while every effort has been made to ensure the accuracy of
the information contained in this document, Fratelli Bertazzoni reserves the
right to change it at any time without notice.
For detailed installation instructions, consult the installation manual.
Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered
trademarks of Bertazzoni Spa.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>