BERTAZZONI PRO486BTFGMXT 48 Inch All Gas Range 6 Brass Burners And Griddle Installation Guide
- June 13, 2024
- Bertazzoni
Table of Contents
ERTAZZONI PRO486BTFGMXT 48 Inch All Gas Range 6 Brass Burners And Griddle
Product Information
- The product is a [Product Name] that comes with various features and functionalities. It is designed to be installed in a specific location, following the provided instructions for proper usage.
Side View
- The side view of the product showcases its overall shape and design.
Leg Details
- The leg details refer to the specific information about the legs of the product, such as their size, material, and installation requirements.
Front View
- The front view of the product provides a visual representation of its front side, highlighting any controls or features located on this side.
Worktop Details
- The worktop details include information about the surface where the product is meant to be used, such as its material, dimensions, and any specific considerations for its maintenance or usage.
Rear View
- The rear view of the product displays its backside, which may contain additional features, connections, or installation requirements.
Product Usage Instructions
Installation:
Prior to installation, ensure that a properly-grounded horizontally mounted
electrical receptacle is available. The receptacle should be installed no
higher than 3 inches (7.6 cm) above the floor. It should not be less than 2
inches (5 cm) nor more than 8 inches (20.3 cm) from the left side of the
product (when facing it). It is important to check and comply with all local
code requirements.
For gas connection, install an agency approved, properly sized manual shut-off
valve. The valve should be positioned at a maximum height of 3 inches from the
floor. The minimum height should be 2 inches, while the maximum height from
the right side (when facing the product) should be 8 inches. Use an approved
shut-off valve and regulator gas connection, along with properly sized flex or
rigid pipe. It is crucial to check and adhere to all local code requirements.
Notes:
- a. Electrical Connection: This note refers to the specific instructions and guidelines for connecting the product to an electrical power source.
- b. Gas Connection: This note provides information and instructions regarding the gas connection of the product.
Dimension
INSTALLATION
- A properly-grounded horizontally mounted electrical receptacle should be installed no higher than 3” (7.6 cm) above the floor, no less than 2” (5 cm) and no more than 8” (20,3 cm) from the left side (facing product). Check all local code requirements.
- Install agency approved, properly sized manual shut-off valve at max. height of 3” from floor, 2” min. height/ 8” max. height from the right side (facing product).
- Use approved shut-off valve & regulator gas connection, properly sized flex or rigid pipe. Check all local code requirements.
NOTE
- a. Electrical Connection
- b. Gas Connection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>