Hot Tools HT1097BG Hair Dryer User Manual

Hot Tools HT1097BG Hair Dryer

IMPORTANT SAFETY INSTRUCTIONS

• When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
• READ ALL INSTRUCTIONS BEFORE USING.
• KEEP AWAY FROM WATER.
• DANGER: As with most electrical appliances, electrical parts are electrically live even when the switch is off.

To reduce the risk of death by electric shock:

• Always “unplug it” immediately after using.
• DO NOT use while bathing.
• DO NOT place or store appliance where it can fall or be pulled into a tub or sink.
• DO NOT use near, place in or drop into water or other liquid.
• If an appliance falls into water, “unplug it” immediately. DO NOT reach into the water.
• DO NOT use an appliance with a twisted, bent or otherwise damaged cord.

WARNING : To reduce the risk of burns, fire, electrocution, or injury to persons:

• An appliance should never be left unattended when plugged in. Turn off the switch and unplug the electrical cord when not in use.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped into water.
• Return the appliance to Helen of Troy, L.P., Attention: Consumer Services Department, for examination and replacement, if applicable.
• Keep the cord away from heated surfaces. DO NOT pull, twist or wrap the cord around the barrel.
• Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• DO NOT use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• DO NOT use an extension cord with this appliance.
• DO NOT direct hot air toward eyes or other heat-sensitive areas.
•  Attachments (when furnished) may be hot during use. Allow them to cool before handling.
• DO NOT place appliance on any surface while it is operating.
• While using the appliance, keep your hair away from the air inlets.
• This appliance is not dual voltage and is intended for 110-120-volt use only.
• DO NOT operate this appliance with a voltage converter.

Specifications

• Dimensions H185mm x W90mm
• Scale 100%
• Material 70gsm Wood free paper
• Finishes W Fold
• Colours 2 colours: Black + Red PMS032U

USER MAINTENANCE INSTRUCTIONS

This appliance is equipped with a thermostat that may cycle OFF or cause the heaters to turn off if the temperature exceeds comfort level due to partially blocked air inlet or outlet openings. In the event that the appliance stops or releases only cool air during use, turn off the switches and allow the appliance to cool down, at which time the thermostat will automatically reset. During use, DO NOT block the air openings. When using this appliance near water (e.g., bathrooms), the use of an electrical outlet protected by a Ground Fault Circuit Interrupter is recommended.

Maintenance
Your appliance is virtually maintenance-free. No lubrication is needed. Keep heated surfaces clean and free of dust, dirt, and hair spray. If cleaning becomes necessary, unplug the appliance from the power source and wipe the exterior with a damp cloth. If the cord becomes twisted, untwist prior to use.

WARNING : If any malfunction occurs, do not attempt to repair. This appliance has no user-serviceable parts.

STORAGE

Unplug appliance when not in use.

• Allow appliance to cool and store out of reach of children in a safe, dry location.
• Never wrap the cord around the appliance since this will cause the cord to wear prematurely and break.
• Handle cord carefully for longer life and avoid jerking, bending sharply, twisting, or straining cord, especially at plug connections.

HOW TO OPERATE UNIT

OPERATING INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to force the plug into an improper outlet. For U.S. residents only: In the event of an unusual circumstance such as immersion, the protective device will not allow the dryer to operate. Periodically check the safety plug to verify it is in proper working order. Plug the appliance in an electrical outlet and press the test button. The dryer should stop immediately. To resume operation, press the reset button.

Styling Tips

• For faster results, towel dry hair to remove excess water, then run a comb through damp hair to detangle for best results.
• Plug the appliance into an electrical outlet and adjust the switch to the selected setting. Use the LOW setting on fine or thin hair and the HIGH setting on thick and coarse hair. Use the COOL setting to lock in the style.
• Separate hair into manageable sections.

For Voluminous Blowouts

• Use the Blowout Volumizer attachment, place the dryer close to the roots and brush down toward the ends.
• The mixed nylon-pin with rounded tips quickly detangle, while combined Boartech2TM bristles with Refresh3 MaxTM activated charcoal gently grip hair to smooth and promote shine.
• For extra lift at the roots, hold the dryer for 2 to 3 seconds under the roots.
• To curl ends IN, place the dryer UNDER the ends and hold for 2 to 3 seconds before rotating inward.
• To curl ends OUT, place the dryer OVER the ends and hold for 2 to 3 seconds before rotating outward.
• When drying is complete, wait for the dryer to cool before storing. Do not wrap the cord around the dryer.
• Wait for the dryer to cool before removing the attachments and storing. Do not wrap the cord around the dryer.

CLEANING INSTRUCTIONS

If cleaning becomes necessary, unplug the appliance from the power source and wipe the exterior with a damp cloth. Dust and lint can be removed from air intake openings with a small brush or vacuum cleaner brush attachment. DO NOT wash in water or allow moisture or additional debris to enter the unit while cleaning.

CHANGING THE BRUSH ATTACHMENTS

• To change a brush attachment, turn the styler off, unplug the appliance and allow it to fully cool.
• Press the release button down and slightly twist to the right to unlock handle as you pull the attachment away from the body of the appliance (Figure A).
• Align the new attachment with the handle and insert it with a slight twist to the left to lock the attachment (Figure B).

Product Registration – Go Online NOW!

• Benefits of registering your new product.
• Proof of ownership: your model number, serial number and other information will be kept in our files.
• Stay informed of the latest trends and product releases via email.
• Your privacy is important to us and we will NOT share or sell this information.

NOTICE
If your dryer unexpectedly stops, or if it is not blowing hot air, turn it off, unplug it and CLEAN THE LINT FILTER while waiting 5 minutes for the dryer to cool down. Then press the red ”reset” button on the ALCI safety plug until it clicks. Your dryer should resume operation

*IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI NOW!**

Your local electrician can help you decide which type is best for you: a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires a GFCI in the bathroom, garages and outdoor outlets of all new homes. WHY DO YOU NEED A GFCI? Electricity and water don’t mix. If your hair dryer falls in water while it’s plugged in, the electric shock can kill you… even if the switch is “off.” A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.

Printed in China

• Hot Tools®, Black Gold®, Refresh3 Max™, Boartech2™ and Smoothflow™ are trademarks of
• Helen of Troy Limited.
• Smoothflow™ Helen of Troy Limited.
• © 2020 Helen of Troy. All rights reserved.
• For product information, visit us at  HotTools.com

FAQs

Is the Hot Tools HT1097BG Hair Dryer suitable for all hair types?

Yes, the Hot Tools HT1097BG Hair Dryer is designed to work effectively on all hair types, including fine, thick, curly, and straight hair.

What is the wattage of this hair dryer?

This hair dryer has a powerful 1875-watt motor, ensuring efficient and quick drying.

Does it come with multiple heat and speed settings?

Yes, the Hot Tools HT1097BG Hair Dryer features multiple heat and speed settings, allowing you to customize your drying experience for different styling needs.

Is this hair dryer suitable for professional use?

Yes, it's suitable for both home and professional salon use, thanks to its high-performance motor and durability.

What is the Cool Shot feature for?

The Cool Shot feature is designed to set your hairstyle in place, providing a blast of cool air to lock in your desired look.

Is the hair dryer lightweight and easy to handle?

Yes, the Hot Tools HT1097BG Hair Dryer is lightweight and ergonomically designed for comfortable use, reducing fatigue during styling.

Does it come with a removable filter for easy cleaning?

Yes, the hair dryer is equipped with a removable filter that makes cleaning and maintenance a breeze.

Can I use this hair dryer for straightening my hair?

While it's primarily designed for drying, you can use it with a round brush to help achieve a smoother and straighter look.

Is it dual voltage for international travel?

No, the Hot Tools HT1097BG Hair Dryer operates on standard US voltage and may require a voltage converter for international use.

What type of cord does it have?

The hair dryer comes with a 9-foot professional-length cord, giving you ample room to move and style.

Is it suitable for adding volume to hair?

Yes, the hair dryer's powerful airflow and nozzle attachment make it suitable for adding volume and lift to your hair.

Can I use this hair dryer for curly hair to enhance my curls?

Yes, you can use the diffuser attachment to enhance and define your natural curls.

Is it easy to store and travel with?

Yes, the hair dryer has a convenient hanging ring for storage, and its compact design makes it suitable for travel.

Does it come with a warranty?

Yes, the Hot Tools HT1097BG Hair Dryer typically comes with a manufacturer's warranty. Be sure to check the warranty details with your purchase.

Is it suitable for reducing frizz?

Yes, the hair dryer's powerful airflow and concentrator nozzle can help reduce frizz and leave your hair looking smoother.

Can I purchase replacement attachments for this hair dryer?

Yes, replacement attachments such as concentrator nozzles and diffusers are often available for purchase separately.

Video- OVERVIEW

Download This PDF Link:Hot Tools HT1097BG Hair Dryer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>